AMX NetLinx Master Card NXC-ME260-64 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide
NXC-ME260-64 NetLinx Master Card
For more detailed installation, configuration, programming, file transfer, and
NXC-ME260-64 Specifications (Cont.)
operating instructions, refer to the NXC-ME260-64 Instruction Manual, available
Included • Connector Bag containing:
online at www.amx.com.
- 2-pin 3.5 mm mini-Phoenix connector (female) (41-5025)
Accessories:
- 4-pin 3.5 mm mini-Phoenix connector (female) (41-5047)
- 5-pin 3.5 mm mini-Phoenix connector (female) (41-5053)
Overv

ملخص المحتوى في الصفحة رقم 2

Note: DIP switch 1 activates/deactivates the Program Run Disable Mode. Program Port Connections/Wiring DIP Switches 2,3, and 4 must remain OFF at all times. The NXC-ME260/64 is equipped with two Program ports. One is located on the Setting the Configuration (Program Port) DIP Switch front panel and the other is on the rear for easy access. The port on the front panel is an RS232 (male) connector and the rear port is a grey 5-pin (male) 1. Disconnect the power supply from the rear 2-pin PW