Inhaltszusammenfassung zur Seite Nr. 1
User Guide
E713CC Amplified Big Button
Cordless Phone with Corded
Digital Answering Machine
Inhaltszusammenfassung zur Seite Nr. 2
2
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS WARNINGS: PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. To maintain the compliance with the FCC’s RF exposure guideline, place the base unit at least 20 cm from nearby persons. To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Avoid contact with liquids. Do not locate base unit or handset near wat
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS 13. To reduce the risk of electrical shock, do not take this phone apart. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 14. Unplug this product from the wall outlet and refer servicing to the manufacturer under the following conditions: when the power supply cord or plug is frayed or damaged; if liquid has been spilled into the product
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY INSTRUCTIONS 24. Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your tele- phone with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. If you experience hearing discomfort, y
Inhaltszusammenfassung zur Seite Nr. 6
PACKAGING CONTENTS/LOCATION Package contains the following items: • Answering Machine base station with corded handset • AC power adapter for Answering Machine base station • Telephone line cord for Answering Machine base station • Cordless Handset • Charging base for cordless handset • Belt clip for cordless handset • (2) Rechargeable batteries for cordless handset • User Manual • Warranty/FCC Requirements booklet Installation Location For maximum coverage and reduce the interference
Inhaltszusammenfassung zur Seite Nr. 7
CONNECTING CORDED BASE CONNECTING THE ANSWERING MACHINE BASE STATION 1 – Connect the corded handset to the base station as shown below. 2 – Plug the power supply cord into the jack located on the back of the base station. Plug the other end of power supply line cord into an electrical outlet. Always use the cables provided in the box. WARNINGS: Use only the power adapter provided for the base station. Always use the cables provided in the box, others may not be compatible. NOTE: The base u
Inhaltszusammenfassung zur Seite Nr. 8
GETTING TO KNOW YOUR CORDED BASE ANSWERING MACHINE BASE STATION 7 1 8 9 10 2 3 11 12 4 13 5 14 15 16 6 17 18 19 8
Inhaltszusammenfassung zur Seite Nr. 9
GETTING TO KNOW YOUR CORDED BASE 1 RINGER INDICATION • Flashes when ringing. • In idle mode: ON if Answering machine is on; OFF if Answering machine is off. 2 LCD DISPLAY 3 MEMORY KEYS • Inial mode: Long press to store the Store the number entered from idle mode. • In idle mode: Press to dial out to the number stored in the memory key. 4 CLEAR/MUTE • In main menu mode: Press to go back to idle screen. • In sub-menu mode: Press to go back to previous level. • In sub-menu mod
Inhaltszusammenfassung zur Seite Nr. 10
GETTING TO KNOW YOUR CORDED BASE 7 REPEAT/REDIAL/PAUSE ( /RD/P) • In Idle mode: Press to access the redial list. • In predial or editing mode: Press and hold to insert a pause. • In TAM message playback mode: Press to go back to previous message 8 DELETE (X) • In editing mode: Short press to backspace one digit, long press to clear whole strings. • In Directory list/Redial list/Call log view mode: Press to delete an entry. • In TAM message playing mode: Press to delete a messag
Inhaltszusammenfassung zur Seite Nr. 11
GETTING TO KNOW YOUR CORDED BASE 13 FLASH/PAGE • During a call: Press to insert a Flash. • In Idle mode: Press to page handsets. Press and hold to enter registration mode. 14 ANSWER ON/OFF ( ) • In Idle: Press to switch the answering machine ON or OFF. • During message playback: Press to stop message playback. 15 VOLUME DOWN (VOL -) • During a call or TAM message playback: Press to decrease the volume 16 VOLUME UP (VOL +) • During a call or TAM message playback: Press to increase
Inhaltszusammenfassung zur Seite Nr. 12
GETTING TO KNOW YOUR CORDED BASE LCD Display Icons Description This will display when there is a new CID entry or if one is being viewed. This will display when you have a new Voice Mail message. Will disappear when all the visual messages have been read. (Network dependent) This shows how many messages you have on your local anwering system. Indicates that the ringer is switched off. Indicates the time format. 12
Inhaltszusammenfassung zur Seite Nr. 13
GETTING TO KNOW YOUR CORDED BASE Menu Structure In idle mode, press to access the menu. Press or to navigate the menu. Refer to the following for the menu structure. KEY PRESS
Inhaltszusammenfassung zur Seite Nr. 14
GETTING TO KNOW YOUR CORDED BASE Text and Digit Entry Table The following tables show you where each letter and punctuation character can be found. Respective character table will be used when corresponding menu language is selected. This will be helpful when storing a name in the directory and renaming your phone. In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the right of the last character entered. Writing Tips: 1. Once a charact
Inhaltszusammenfassung zur Seite Nr. 15
USING YOUR CORDED BASE MAKE AN EXTERNAL CALL Preparatory dialing Enter the phone number and lift up the corded handset or press to dial the number. Press to clear the entry when entering the number. Note: To insert a pause in the dialling sequence, press and hold the button, the screen will then show a “P” in the number. Direct dialing Lift up the corded handset or press to take the line and enter the phone number. Call from the directory Pr
Inhaltszusammenfassung zur Seite Nr. 16
USING YOUR CORDED BASE Answer a Call When there is an incoming ring, pick up the corded handset or press to answer the call. End a Call During a call connection, put the corded handset on the base station to end the call. Or press if you have a call in handsfree mode. Adjust Earpiece and Handsfree Volume During a call, you can adjust the earpiece volume from a selection of 5 volume levels (Level 1 to Level 5). If you are in a speakerphone mode, you can choose th
Inhaltszusammenfassung zur Seite Nr. 17
USING YOUR CORDED BASE 2. Press and hold any memory key for more than 2 seconds, until you hear the confirmation tone to indicate the number has been stored. Note: If there is already a number stored before, the old number will be replaced directly. Dial the number in a memory key In idle mode, press / / / / , the phone will auto- matically dial out the telephone number stored in the selected memory key in speakerphone mode. Emergency Call without main power The E713C
Inhaltszusammenfassung zur Seite Nr. 18
USING YOUR CORDED BASE 4. Enter the name; edit, then press to save; display shows Saved, then returns to Redial list. Delete a redial number 1. Follow steps 1 and 2 in section Redial a number from the redial list. 2. Press < X > to delete; number will be deleted immediately. Find the Handset You can locate the handset by operation on the base station as below. 1. In idle mode, press to page all handsets; “PAGING” will flash on the base screen. All handsets registere
Inhaltszusammenfassung zur Seite Nr. 19
USING YOUR CORDED BASE PRIVATE PHONEBOOK (DIRECTORY) Your phone can store up to 50 private directory entries with names and numbers in the corded base. Each directory entry can have a maximum of 20 digits for the phone number and 15 characters for the name. Directory entries are stored alphabetically by name. The directory is shared across your system (corded base and registered cordless handsets). When a new directory entry is added, the system will update all units with the new entry as
Inhaltszusammenfassung zur Seite Nr. 20
USING YOUR CORDED BASE 4. Edit the name or press to backspace a character if necessary. 5. Use to move cursor to the left, to move cursor to the right. 6. Press to save the number and and the display shows Enter name. 7. Edit the name or press to backspace a digit if necessary. Use to move cursor to the left, to move cursor to the right. 8. Press to confirm and the display will show “Saved”, then returns to the list
