Inhaltszusammenfassung zur Seite Nr. 1
2-9920/2-9921
900MHz
Cordless T elephone
User’s Guide
We bring good things to life.
Inhaltszusammenfassung zur Seite Nr. 2
FCC REGISTRATION INFORMATION Your GE telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68, FCC Rules and Regulations. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determinin
Inhaltszusammenfassung zur Seite Nr. 3
INTRODUCTION Your GE 900 MHz Cordless Telephone is designed to give you flexibility in use and high quality performance. To get the most from your new cordless telephone, we suggest that you take a few minutes right now to read through this instruction manual. FCC REGISTRATION INFORMATION ........... 2 ADVANCED FEATURES .......................... 10 INTERFERENCE INFORMATION ................... 2 CHANNEL BUTTON (CHAN)............. 10 HEARING AID COMPATIBILITY................... 2 THE MEMORY FEATU
Inhaltszusammenfassung zur Seite Nr. 4
GETTING STARTED Make sure your package includes the items shown here. IN USE BAT LOW TALK CHAN RE/PA FLASH MUTE IN USE ABC 1 2 DEF 3 Headset CHARGE/ GHI JKL MNO 4 5 6 PAGE (for 2-9921 PQRS TUV WXYZ 7 8 9 only) TONE OPER 0 # * Belt Clip ON OFF–RING PGM MEM PWR–ON OFF (for 2-9921 PAGE only) Base Handset Short telephone Telephone line cord Base plate line cord AC power adapter BEFORE YOU BEGIN MODULAR JACK REQUIREMENTS You need an RJ11 type modular jack, which is the most common type of phone jac
Inhaltszusammenfassung zur Seite Nr. 5
DESKTOP INSTALLATION 6 7 3 2 1 4 T/P switch 1. Make sure base plate is securely fastened. 2. Plug the telephone line cord into the PHONE LINE jack on the base and into a modular jack. 3. Plug the power supply cord into the POWER 9V DC jack on the base and into an AC outlet. 4. Set the T/P switch to T for touch-tone service, or P for pulse (rotary) service. If you don’t know which type of service you have, check with the phone company. 5. Set RING switch (on the handset) to ON. 6. Raise the base
Inhaltszusammenfassung zur Seite Nr. 6
1 WALL MOUNT INSTALLATION 2 1. Remove the handset hook; turn it upside down, and put it back in the slot. You need to do this so the handset doesn’t fall out of the base. 2. Plug the short telephone line cord into the jack marked PHONE LINE on the back of the unit and plug the other end into a modular wall jack. 3 3. Connect the power adapter to the POWER 9V DC jack on the phone. 5 4. Install the base plate by putting the tabs into the slots on the top of the unit first, and then snapping the bo
Inhaltszusammenfassung zur Seite Nr. 7
10. Place handset in the base to charge for 12 hours. The CHARGE/PAGE light comes on to indicate that the battery is charging. You must charge the handset battery continuously (without using the phone) for 12 hours when you set up the phone. CORDLESS PHONE BASICS MAKING A CALL TALK button After initial set up, put handset in the base for 12 hours to charge the battery. The only two things you need to know to make a call are: • Press the TALK button before you dial. • Press TALK or place the hand
Inhaltszusammenfassung zur Seite Nr. 8
FLASH BUTTON VOL (volume) switch Use the FLASH button to activate custom (on the side of the handset) calling services such as call waiting or call transfer, which are available through your MUTE local phone company. FLASH button button TIP: If you press the TALK button to activate custom calling services such as call waiting, you’ll hang up the phone. Press FLASH instead. VOL (VOLUME) SWITCH Controls the volume of the handset's earpiece. IN USE BAT LOW CHAN TALK RE/PA MUTE FLASH RING/PWR (RING
Inhaltszusammenfassung zur Seite Nr. 9
SELECTING A RING SOUND (PGM BUTTON) You can choose between two different ring sounds. To choose the first ring sound: 1. Press PGM. 2. Press 1. 3. Press PGM. To choose the second ring sound: 1. Press PGM. 2. Press 2. 3. Press PGM. To check your current ring sound selection, press PGM, press 3, and press PGM again. MUTE BUTTON Use the MUTE button to interrupt a phone conversation to talk privately with someone else in the room. 1. Press MUTE to activate mute feature (the BAT LOW light blinks). 2.
Inhaltszusammenfassung zur Seite Nr. 10
PAGING THE HANDSET IN USE Press the PAGE button on the base to CHARGE/ PAGE locate a misplaced handset. When you press the PAGE button, the handset beeps. Press the TALK button when you PAGE button locate the handset. Remember that the PAGE ringer must be ON in order for the handset to ring. CHAN button ADVANCED FEATURES CHANNEL BUTTON (CHAN) If you ever experience any interference or don’t have clear voice quality, press the CHAN button on the handset to advance to another channel. IN USE BAT L
Inhaltszusammenfassung zur Seite Nr. 11
CHANGING A STORED NUMBER Use the same procedure to change a stored number as you do to store a number— you’re just moving the phone number to a different memory location. STORING A REDIAL NUMBER The phone must be off (PWR button ON, but no dial tone). 1. Press MEM. 2. Press RE/PA (redial/pause). 3. Press MEM. 4. Press any number key (0-9) to store the phone number in that memory location. STORING A PAUSE IN MEMORY Use the RE/PA button to insert a pause when a delay is needed in the dialing seque
Inhaltszusammenfassung zur Seite Nr. 12
DIALING A STORED NUMBER 1. Press the TALK button to get a dial tone. 2. Press MEM and then press the number for that memory location. CHAIN DIALING FROM MEMORY Use this feature to make calls which require a sequence of numbers, for instance if you use a calling card for a frequently called long distance number. Basically, you dial each part of the sequence from memory. The following example shows how you can use chain dialing to make a call through a long distance service: The Number For Memory
Inhaltszusammenfassung zur Seite Nr. 13
HEADSET HEADSET AND BELT CLIP OPERATION Headset plug CONNECTING A HEADSET TO Headset THE HANDSET jack For hands free conversation, connect the headset (for 2-9921 only) to the HEADSET jack as shown. The handset receiver and microphone are disabled when the headset is connected. Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately 2 to 3 inches from your mouth. • Press the TALK button to answer or place a call before using the headset.
Inhaltszusammenfassung zur Seite Nr. 14
RBRC CHANGING THE BATTERY Make sure RING/POWER switch is OFF before you replace battery. 1. Remove the battery compartment door. 2. Disconnect the cord attached to the battery pack and remove the battery pack from the handset. 3. Insert the new battery pack and connect the cord into the jack inside the handset. 4. Put the battery compartment door back on. 5. Place handset in the base to charge. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone and/or
Inhaltszusammenfassung zur Seite Nr. 15
TROUBLESHOOTING GUIDE In case of difficulty, please check the following Troubleshooting Guide before seeking service. Problem Solution No dial tone • Check installation: — Is the base power cord connected to a working outlet? — Is TALK light on? — Is the telephone line cord connected to the base unit and the wall jack? • Disconnect the base from the wall jack and connect another phone to the same jack. If there is no dial tone in the second phone, the problem might be your wiring or local servic
Inhaltszusammenfassung zur Seite Nr. 16
Problem Solution Cannot hear the • Set the RING/PWR switch on the handset to ON (the far left Page alert tone position). Range is shorter • Press the CHAN button during the conversation to select a than normal new channel. • Position the base antenna upward. Battery will not hold a • Be sure you are sufficiently charging the battery. When the charge or is fully charged battery has been charged for 12 hours, you can expect and the BAT LOW lights approximately 4 hours of talk time. • Check to be
Inhaltszusammenfassung zur Seite Nr. 17
GENERAL PRODUCT CARE To keep your telephone working and looking good, follow these guidelines: • Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose to direct sunlight or moisture. • Avoid dropping the handset, as well as other rough treatment to the phone. • Clean the phone with a soft cloth. • Never use a strong cleaning agent or abrasive powder because this will damage the finish. • Retain the o
Inhaltszusammenfassung zur Seite Nr. 18
SERVICE The FCC requires this product to be serviced only by the manufacturer or its authorized service agents. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Consumer Electronics could void the user’s authority to operate this product. For instructions on how to obtain service, refer to the warranty included in this Guide. Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as
Inhaltszusammenfassung zur Seite Nr. 19
INDEX A O Accessory Order Form 20 Order Form 20 B P Battery PAGE/FIND button 10 Installation 14 Paging the Handset 9 Battery Safety 14 PHONE ON/OFF 7 Belt Clip 13 Poor Reception 17 Buttons Product Care 17 CHANNEL 10 PWR/RING (power and ringer) Switch 8 FLASH 8 MEMORY 9, 10, 11, 12 R PAGE/FIND 10 Receiving a Call 7 PHONE ON/OFF 7 REDIAL 7 REDIAL 7 TONE 9 Ringer switch 10 Ringer switch (PWR/RING) 8 C Chain Dialing 12 S CHANNEL Button 10 Service 18 CHARGE/IN USE light 5, 7
Inhaltszusammenfassung zur Seite Nr. 20
" CUSTOMER: CUT ALONG DOTTED LINE. ACCESSORY ORDER FORM DESCRIPTION CATALOG NUMBER PRICE* QUANTITY TOTAL AC power supply adapter (white) 5-2420A or B $18.35 AC power supply adapter (black) 5-4081 $18.35 Belt clip 5-2426 $5.61 Headset 5-2425 $36.35 Replacement battery 5-2358 $21.35 For credit card purchases *Prices are subject to change without notice. Your complete charge card number, its expiration date and your Total Merchandise.........................................$_______________ signatu
