Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Contents Welcome/Features 4 Storing and Editing the RocketDial 31 Making Calls with the RocketDial 31 Controls and Functions 5 Deleting the RocketDial 32 Getting Started Caller ID Features Installing the Phone 7 Caller ID and CIDCW (Caller ID on Call Waiting) 33 Mounting the Main Base Unit on a Wall 12 When the Telephone Rings 33 Register Handsets to the Main Base Before Using! 14 Viewing the Caller ID Message List 34 When to Re-register Handsets 15 Deleting Information from the Caller ID List 3
Inhaltszusammenfassung zur Seite Nr. 4
Congratulations on your purchase of the Uniden dual handset cordless telephone. This Welcome cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary. • 5.8 GHz Extended Range Technology • 10 Speed Dial Memory Features • Dual Handset System • One-Touch RocketDial (Extra Handset & Charger In
Inhaltszusammenfassung zur Seite Nr. 5
Controls and Functions Handsets 1. Handset antenna 2. Beltclip hole 3. Jack for optional headset 1 4. Handset battery compartment 5. Handset earpiece 6. LCD display 5 7. call id (Caller ID)/menu key 2 8. vol/ / (volume & scroll) key 9. vol/ / (volume & scroll) key 6 10. /tone/ (left cursor) key 11. redial/pause key 7 14 3 12. select/channel key 8 15 9 13. Handset microphone and 16 ringer speaker 14. RocketDial key 15. end key 4 16. talk/flash key 10 17 17. #/ (right cursor) key 11 18 18. memory
Inhaltszusammenfassung zur Seite Nr. 6
Main Base Unit 21. (repeat/rewind) key 38 39 28 22. volume/SELECT (up) key 23. memo/rec (record) key 24. volume/SELECT (down) key 29 charge in use 30 25. answer on/off key 21 31 22 26. ringer key memo 23 rec 32 volume SELECT 27. Base charging contacts 24 33 28. Base antenna 25 34 answer on/off MENU/CLOCK greeting 35 26 29. charge/in use LED ringer SET find hs 36 mic 30. (play/stop) key 37 31. (skip/fast forward) key 27 32. (delete) key 33. MENU/CLOCK key Extra Charging Cradle (for Second Hand
Inhaltszusammenfassung zur Seite Nr. 7
GETTING STARTED Installing the Phone Do the following steps: A. Choose the best location B. Install the rechargeable battery packs into both handsets C. Connect the main base unit and charging cradle If your home has specially wired alarm A. Choose the best location equipment connected to When choosing a location for your new phone, here are some important guidelines the telephone line, be you should consider: sure that installing the system does not disable Avoid heat sources, such as radiators
Inhaltszusammenfassung zur Seite Nr. 8
B. Install the rechargeable battery packs into both handsets Both handsets are powered by a rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base unit or charging cradle. 1) Press down on the handset battery case cover (use the • For optimum performance use only finger indention for a better grip) and slide the cover the Uniden BT-800 downward to remove. rechargeable battery pack supplied with 2) Plug the battery pack connector (red & black
Inhaltszusammenfassung zur Seite Nr. 9
GETTING STARTED Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, Low Battery flashes on the LCD and none of the keys will operate. • Even when the If the phone is in use, Low Battery flashes and the handset battery pack is not beeps. Complete your call as quickly as possible and return the being used, it will handset to either cradle for charging. gradually discharge ov
Inhaltszusammenfassung zur Seite Nr. 10
C. Connect the main base unit and charging cradle 1) Connect each AC adapter to the DC IN 9V jack and to each standard 120V AC wall outlet. Use only the supplied AD- 2) Place one handset in the main base unit 314 AC adapter for the and the other in the charging cradle. main base and AD-310 for the charging cradle. Do 3) Make sure that the charge/in use and not use any other AC charge LED illuminate. If the LED does adapter. not illuminate, check to see that the AC adapter is plugged in and that
Inhaltszusammenfassung zur Seite Nr. 11
GETTING STARTED If the main base charge/in use or charging cradle charge LED light does not illuminate: • Check to see if the AC adapter is plugged into both cradles and the electrical wall outlet properly. (Use only the supplied AC adapters. Do not use any other AC adapters.) • Check to see if both handsets are sitting correctly in each • Place the handsets in the main base and cradle and making good contact with each cradles charging charging cradle with contacts. the keypad facing forward for
Inhaltszusammenfassung zur Seite Nr. 12
Mounting the Main Base Unit on a Wall Standard wall plate mounting 1 This phone can be mounted on any standard wall plate. DO NOT use an AC 1) Snap the wall mount adapter into the notches on outlet controlled by the bottom of the base. a wall switch. 2) Plug the AC adapter into the DC IN 9V jack. 3) Wrap the AC adapter cord inside the molded wiring channel as shown. 4) Plug the AC adapter into a standard 120V AC Wall plate wall outlet. 7 5) Plug the telephone line cord into the TEL LINE jack.
Inhaltszusammenfassung zur Seite Nr. 13
GETTING STARTED Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #
Inhaltszusammenfassung zur Seite Nr. 14
Register Handsets to the Main Base Before Using! Whichever handset you choose to charge in the main base will automatically register to the base. The second handset (charging in the extra charging cradle) MUST also be registered • When you charge the to the main base before use. Follow the steps below to register the second handset. handsets, Caller ID 1) Be sure both handsets are fully charged. summary screen and the name of the 2) Remove the handset from the charging cradle, and place it in t
Inhaltszusammenfassung zur Seite Nr. 15
GETTING STARTED When to Re-register Handsets You’ll need to re-register the handsets if any of the following things occur. Follow steps on page 14 to re-register the handset. 1) Each time the digital security code is changed, you will need to re-register the second handset. Refer to page 56 for details regarding the Digital Security Code. • Make sure to return the handsets to the charg- 2) When the main base is without power for more than 30 minutes, both handsets ing cradles after each will nee
Inhaltszusammenfassung zur Seite Nr. 16
Setting Menu Display Options There are five setup options, AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Handset 1 shows HS1 in the display while the phone is charging.) Setting AutoTalk and CIDCW The cordless phone 1) Press and hold call id/menu. The following screen appears. features include 2) Use vol/
Inhaltszusammenfassung zur Seite Nr. 17
GETTING STARTED 1) When the phone is in standby mode, press and hold call id/menu. The following screen appears. 2) Press vol/ / to move the pointer to Area Code. 3) Press select/channel. If an area code has been already stored, the phone displays it. 4) Use the number keys (0 - 9) to enter a 3-digit area code. To change a previously–entered area code, use the delete/transfer to backspace. 5) Press select/channel. A confirmation tone sounds and the displayed area code is entered. 6) Press end
Inhaltszusammenfassung zur Seite Nr. 18
1) Be sure you are using handset 1. Handset 1 shows HS1 in its display while the phone is charging. 2) When the phone is in standby mode, press and hold call id/menu. The following screen appears. • If you are not sure of your dialing system, 3) Press vol/ / three times to select Dial. set for tone dialing and make a trial call. 4) Press select/channel to set the phone to Pulse dialing. If the call connects, leave the setting as is. 5) Press end and return the handset to the main base unit to c
Inhaltszusammenfassung zur Seite Nr. 19
GETTING STARTED BASICS Making and Receiving Calls Handset on Main Base or Charging Cradle Handset off Main Base or Charging Cradle Remove the handset (AutoTalk: Press talk/flash (AutoTalk: off), Receiving on) or remove the handset and or press talk/flash, /tone/ , a call press talk/flash (AutoTalk: off). #/ or any number key Refer to page 16 (AutoTalk: on). "Setting Menu Display Options" to turn On the 1) Remove the handset. 1) Press talk/flash. AutoTalk feature if 2) Press talk/flash. 2) Listen
Inhaltszusammenfassung zur Seite Nr. 20
Adjusting the Handset Ringer and Earpiece Volume Handset ringer tone and volume Press the volume up key or volume down key (labeled as vol/ / or vol/ / ) in standby mode to select one of five ringer tone/volume combinations. Earpiece volume To change the earpiece volume, press vol/ / or vol/ / keys during a call. This setting will remain in effect after the telephone call has ended. Temporarily Mute Ringer If the handset is off the base, simply press end to temporarily mute the incoming ring. Th
