Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Contents Welcome/Features 3 Traveling Out-of-Range 21 Selecting a Different Channel 21 Controls and Functions 4 Find Handset 21 Terms Used in this Manual 6 Using Call Waiting 22 Voice Mail Waiting Indicator 22 Accessibility 6 Using the Speed Dial Memory 23 Installing the Phone 7 Storing Names and Numbers in Speed Dial Memory 23 A. Choose the Best Location 7 Storing Caller ID Messages in Speed Dial Memory 26 B. Install the Rechargeable Battery Packs into the Handsets 8 Making Calls from Speed Dia
Inhaltszusammenfassung zur Seite Nr. 3
Congratulations on your purchase of the Uniden dual handset cordless telephone. This Welcome cordless phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless telephone may vary. • 5.8GHz Extended Range Technology • Last Number Redial Features • Dual Handset System • Voice Mail W
Inhaltszusammenfassung zur Seite Nr. 4
Controls and Functions 1. Handset antenna 2. Beltclip hole 1 3. Jack for optional headset 4. Handset ringer speaker 5. Handset battery compartment 6. Handset earpiece 6 7. LCD display 2 8. (volume & scroll down) key 9. Call id (Caller ID)/menu key 10. /tone/ (left cursor) key 7 11. Redial/pause key 3 12. Select/channel key 8 13 4 13. (volume & scroll up) key 9 14 14. End key 15. Talk/flash key 15 16. #/ (right cursor) key 17. Memory key 5 18. Delete/transfer key 19. Handset microphone 10 16
Inhaltszusammenfassung zur Seite Nr. 5
Main Base 21. Main base charging contacts 22. Find hs key 23. Charge/in use and VMWI (Voice Mail Waiting Indicator) LED 24. Telephone line jack 24 25. DC IN 9V jack 26. Charging contacts 25 27. Charge LED 21 28. DC IN 9V jack 22 23 Extra Charging Cradle (for Second Handset) 28 26 27 www.uniden.com CONTROLS AND FUNCTIONS [ 5 ]
Inhaltszusammenfassung zur Seite Nr. 6
Terms Used in this Manual • Standby Mode - The handset may be sitting in or off the cradle, but is NOT in use. The talk/flash key has not been pressed and there is no dial tone. • Talk Mode - The handset is off the cradle and the talk/flash key has been pressed, enabling a dial tone. • CID - Caller ID • CIDCW - Caller ID on Call Waiting Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you ha
Inhaltszusammenfassung zur Seite Nr. 7
INSTALLING THE PHONE Installing the Phone Do the following steps: A. Choose the Best Location B. Install the Rechargeable Battery Packs into the Handsets C. Connect the Main Base and Charging Cradle, and Charge the Handsets D. Mount the Main Base on a Wall If your home has specially wired alarm A. Choose the Best Location equipment connected to Before choosing a location for your new phone, here are some important guidelines the telephone line, be you should consider: sure that installing the Av
Inhaltszusammenfassung zur Seite Nr. 8
B. Install the Rechargeable Battery Packs into the Handsets Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle. Use only the Uniden (BT-905) rechargeable 1) Press down on the handset battery case cover (use the battery pack supplied finger indention for a better grip) and slide the cover with your phone. downward to remove. 2) Plug the battery pack connector (red & black wires) into the smal
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLING THE PHONE C. Connect the Main Base and Charging Cradle, and Charge the Handsets 1) Connect each AC adapter to the DC IN 9V jack and to each standard 120V AC wall outlet. • Use only the supplied 2) Place one handset in the main base and AD-314 AC adapter the other in the charging cradle with the for the main base and keypad facing forward. AD-310 or AD-1010 for the charging 3) Make sure that the charge/in use LED and cradle. charge LED illuminate. If the LED does not Do not use any
Inhaltszusammenfassung zur Seite Nr. 10
5) Once the handset battery packs are fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance. Modular [ 10 ] INSTALLING THE PHONE www.uniden.com
Inhaltszusammenfassung zur Seite Nr. 11
INSTALLING THE PHONE D. Mount the Main Base on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Plug the AC adapter to the DC IN 9V jack. 2) Route the AC adapter cord through the molded wiring channel as shown. 3) Plug the AC adapter into a standard 120V AC wall outlet. 4) Plug the telephone line cord into the TEL LINE jack. 5) Plug the telephone line cord into the telephone outlet. 6) Align the mounting slots on the main base with the mounting posts
Inhaltszusammenfassung zur Seite Nr. 12
Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths. • Make sure the wall material is capable of supporting the weight of the main base and handset. • Use #10 screws (
Inhaltszusammenfassung zur Seite Nr. 13
INSTALLING THE PHONE Headset Installation Your phone may be used with an optional headset. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be purchased by visiting our website at www.uniden.com or by calling our Parts Department. See page 35.) Register Handsets to the Main Base before Using! Whichever handset you choose to charge in the main base will automatically register to the main base. The second handset (
Inhaltszusammenfassung zur Seite Nr. 14
When to Re-register Handsets 1) You’ll need to re-register the second handset (follow steps on page 13) each time the digital security code is changed. Refer to page 32 for details regarding the Digital Security Code. 2) When there is a power failure for more than one hour: Make sure to return the If power failure occurs (e.g. due to electrical storm or if the unit is unplugged handsets to the cradles during a move), both handsets will need to be re-registered. To re-register, follow after each
Inhaltszusammenfassung zur Seite Nr. 15
BASIC SETUP Basic Setup There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set by using Handset 2, you will not see these options listed on the LCD screen. (Headset 1 shows HS1 in the display while the phone is charging.) AutoTalk, Area Code and Language options can be set by using either Handset 1 or Handset 2. Activating AutoTalk
Inhaltszusammenfassung zur Seite Nr. 16
3) Press the select/channel key to toggle and turn on Caller ID on Call Waiting. 4) Press the end key and return the handset to the main base to complete the setting. The handset returns to standby mode. Entering Your Area Code If you can make a call by dialing only 7 digits (instead of 10), you can program your local area code in your phone. If you get a call from within your area code, you'll only see the 7-digit phone number. If you get a call from outside your area code, you'll see all 10 di
Inhaltszusammenfassung zur Seite Nr. 17
BASIC SETUP 1) When the phone is in standby mode, press and hold the call id/menu key. The following screen appears. 2) Press the key three times to select Dial. 3) Press the select/channel key to set the phone to pulse dialing. 4) Press the end key and return the handset to the main base to complete the setting. The handset returns to standby mode. Setting the Language You can change the language the menu display uses. Choose from English, French, or Spanish. 1) When the phone is in standby
Inhaltszusammenfassung zur Seite Nr. 18
Using Your Phone Making and Receiving Calls Making a call 1) Remove the handset from the cradle. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the cradle. 2) Dial the number. 3) Press the talk/flash key. Receiving a call To turn on the AutoTalk feature, see "Activating 1) Remove the handset from the cradle. (If AutoTalk is on, the phone will AutoTalk" on page 15. automatically answer the call when you pick it up.) 2) Press the talk/f
Inhaltszusammenfassung zur Seite Nr. 19
USING YOUR PHONE Transferring a Call Your cordless phone allows you to transfer outside calls from handset to handset, only one handset at a time can talk with an outside caller. The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use. To transfer a call 1) During a call, press the delete/transfer key. The call will automatically be placed on hold and the transfer tone sounds. 2) When the other handset receives the call, the t
Inhaltszusammenfassung zur Seite Nr. 20
Adjusting the Earpiece Volume To change the earpiece volume, press the or key during a call. You can only mute the Temporarily Mute Ringer handset ringer if the handset is off the cradle If the handset is off the cradle while an incoming call is when the phone starts ringing, simply press the end key to mute the incoming ring. ringing. The ringer will sound with the next incoming call. Tone Dialing Switch-over If your telephone company requires pulse dialing, you can switch over to tone dial
