Inhaltszusammenfassung zur Seite Nr. 1
User’s manual
CL84100/CL84200/
CL84250/CL84300/
CL84350
DECT 6.0 corded/cordless
telephone/answering system
with caller ID/call waiting
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 85-86 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model number: CL84100 (one handset) CL84200 (two ha
Inhaltszusammenfassung zur Seite Nr. 3
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual Quick start guide CL84100/CL84200/ CL84100/CL84200/ CL84250/CL84300/ CL84250/CL84300/ CL84350 CL84350 DECT 6.0 corded/cordless DECT 6.0 corded/cordless telephone/answering system telephone/answering system with caller ID/call waiting with caller ID/call waiting User’s manual Quick start guide Telephone base Handset with
Inhaltszusammenfassung zur Seite Nr. 4
User’s manual CL84100/CL84200/CL84250/ CL84300/CL84350 DECT 6.0 corded/cordless telephone/answering system with caller ID/call waiting Table of contents Call screening ...................................... 21 Getting started Number of rings ................................. 21 Quick reference guide - handset ........1 Remote access code ........................ 22 Quick reference guide - Message alert tone ........................... 23 telephone base ......................................
Inhaltszusammenfassung zur Seite Nr. 5
Volume control ................................... 35 Save a call log entry to Call waiting ........................................... 35 the directory ...................................... 56 Mute ......................................................... 35 Reasons for missing Options while on calls .......................... 35 caller ID information ........................ 58 Chain dialing ........................................ 36 Answering system Temporary tone dialing ..............
Inhaltszusammenfassung zur Seite Nr. 6
Safety information ............................. 85 Especially about cordless telephones ...................... 86 Precautions for users of implanted cardiac pacemakers ... 86 Pacemaker patients .......................... 86 Especially about telephone answering systems ......................... 86 FCC Part 68 and ACTA.......................... 87 FCC Part 15 ................................................ 88 Limited warranty ...................................... 89 Technical specification
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Quick reference guide - handset CHARGE indicator MENU/SELECT On when the handset Press to show the menu. is charging. While in the menu, press to select an item or save an entry or setting. qCID/-VOLUME pDIR/VOLUME+ Press qCID to show the caller ID history (page 54). Press pDIR to show directory entries (page 48). Press to scroll down while in menus. Press to scroll up while in menus. While entering names or numbers, press to move the While entering names or curso
Inhaltszusammenfassung zur Seite Nr. 8
Getting started Quick reference guide - handset EQ During an outside call, intercom call, message or announcement playback, press to change the quality of the audio to best suit your hearing (page 34). Main menu Main menu The > symbol highlights Play messages (page 62) a menu item. Answering sys (page 59) Directory (page 43) >Play messages Answering sys Call log (page 54) Ringers (page 13) Settings (page 14) Website (page 18) Using menus Press MENU/SELECT to show the first menu item, Play
Inhaltszusammenfassung zur Seite Nr. 9
Getting started Quick reference guide - telephone base FLASH MENU/SELECT IN USE indicator During a call, press to On when the telephone is in Press to show the menu. While answer an incoming call in the menu, press to confirm use, or when the answering when you receive a call system is answering an or save an entry or setting. waiting alert (page 35). incoming call. p/DIR On when a handset is CANCEL Press when the phone is idle to being registered. While using menus, press to display th
Inhaltszusammenfassung zur Seite Nr. 10
Getting started Installation You must install and See pages 7-8 charge the battery before STOP! for easy instructions. using the telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 9). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (DSL -
Inhaltszusammenfassung zur Seite Nr. 11
PRESS TO RELEASE Getting started Telephone base installation Install the telephone base as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see page 9 for details. • Plug the large end of the AC power adapter • Plug the small end into a power outlet of the AC power not controlled by a adapter into the wall switch. power jack on the bottom of the • Plug the other telephone base. end of the telephone line cord into a • Plug one end
Inhaltszusammenfassung zur Seite Nr. 12
Getting started Charger installation Install the charger as shown below. Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are
Inhaltszusammenfassung zur Seite Nr. 13
Getting started Battery installation and charging Install the cordless handset battery as shown below. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the handset charger to charge the battery. For best performance, keep the handset in the handset charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 91 for battery operating times. If the screen sho
Inhaltszusammenfassung zur Seite Nr. 14
Getting started Battery installation and charging CHARGE light Step 3 Charge the handset by placing it face forward in the charger. The CHARGE light on the top of the handset is on during charging. SET DATE --/--/-- After you install your telephone or power returns following SET TIME a power outage, the handset will prompt you to set the date --:-- -- and time. For instructions, see Set date/time on page 15. To skip setting the date and time, press OFF/CLEAR. IMPORTANT INFORMATION 1. Use onl
Inhaltszusammenfassung zur Seite Nr. 15
PRESS TO RELEASE Getting started Installation options The telephone base comes with a mount bracket set for tabletop use. If you want to mount your telephone on a wall, swivel the mount bracket down so the telephone can connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. You might need a professional to install the mounting plate. Tabletop to wall mount installati
Inhaltszusammenfassung zur Seite Nr. 16
Getting started Installation options 2. Remove the handset tab from the telephone base. Rotate and replace it to hold the corded handset securely in place when the telephone base is mounted on the wall. 3. Connect the telephone line 4. If necessary, place the bundled cord and power adapter cord to telephone line cord and the jacks on the bottom of the power adapter cord into the telephone base. If necessary, cavity under the telephone bundle the telephone cord and base as shown below.
Inhaltszusammenfassung zur Seite Nr. 17
Getting started Installation options Wall mount to tabletop installation To change the telephone base from the wall mount position to tabletop position: 1. Remove the telephone base from the wall. 2. If necessary, untie the bundled telephone cord and power adapter cord. Make sure that you unplug the power adapter and telephone line cord from the wall outlets before you begin. 3. Push as indicated by arrows in the illustration until the bracket is released, and then swivel it upward until it
Inhaltszusammenfassung zur Seite Nr. 18
PRESS TO RELEASE Getting started Installation options 4. Connect the telephone line cord and power adapter cord to the jacks on the bottom of the telephone base. Plug the power adapter and telephone line into the wall outlets. 5. Remove the handset tab from the telephone base. Rotate and replace for tabletop use. 12 PRESS TO RELEASE
Inhaltszusammenfassung zur Seite Nr. 19
Telephone settings Handset settings Menu settings You can use the handset menu to change settings. Refer to page 24 to change the telephone base settings. 1. Press MENU/SELECT when in idle mode (when the phone is >Answering sys not in use) to enter the main menu. Directory 2. Press qCID or pDIR to scroll to the feature to be changed. When scrolling through the menu, the > symbol indicates the selected menu item. 3. Press MENU/SELECT to confirm the highlighted item. NOTE: Press OFF/CLEAR to
Inhaltszusammenfassung zur Seite Nr. 20
Telephone settings Handset settings LCD language You can select the language used for all handset screen displays. 1. Press MENU/SELECT in idle mode to enter the main menu. >LCD language Clr voicemail 2. Use qCID or pDIR to scroll to >Settings. 3. Press MENU/SELECT twice to select >LCD language. 4. Press qCID or pDIR to highlight English, Français or LCD LANGUAGE Español. >English 5. Press MENU/SELECT to save your preference and return to the main menu. Press OFF/CLEAR to cancel. Voicemail (
