Inhaltszusammenfassung zur Seite Nr. 1
MULTIMEDIA PROJECTOR
MODEL LC-XT5
✽ Projection lens is optional.
OWNER’S MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Multilanguage Menu Display ◆ Functionally Rich Operation menu is available in 12 languages; This projector has many useful functions such as English, German, French, Italian, Spanish, lens shifting, ceiling and rear p
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Features and Design . . . . . . . . . . . . . . .Input Selection . . . . . . . . . . . . . . .0 . . . . . Input 30 Table of Contents . . . . . . . . . . . . . . . . . . Computer Input Source Selection 31 To The Owner . . . . . . . . . . . . . . . 4 . . . . . . Video Input Source Selection 32 Safety Instructions . . . . . . . . . . . .5 . . . . . Computer Input . . . . . . . . . . . . . . . . . . Air Circulation 6 Computer System Selection 33 Installing the P roje
Inhaltszusammenfassung zur Seite Nr. 4
To The Owner Before installing and operating the projector, read this Safety Precaution manual thoroughly. The projector provides many convenient features and WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC functions. Operating the projector properly enables you to SHOCK, DO NOT EXPOSE THIS APPLIANCE manage those features and maintains it in good condition for TO RAIN OR MOISTURE . many years to come. – This projector produces intense light from the projection Improper operation may result i
Inhaltszusammenfassung zur Seite Nr. 5
Safety Instructions All the safety and operating instructions should be read This projector should be operated only from the type of before the product is operated. power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized Read all of the instructions given here and retain them for dealer or local power company. later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a Do
Inhaltszusammenfassung zur Seite Nr. 6
Safety Instructions Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. EXHAUST VENT AIR INTAKE VENT (REAR SIDE) – Do not put any flammable object or spray can near (BOTTOM SIDE) the projecto
Inhaltszusammenfassung zur Seite Nr. 7
Safety Instructions Installing the Projector IMPORTANT! in Proper Directions Filter Maintenance!! Use the projector properly in specified positions. The projector uses a lamp which generates significant Improper positioning may reduce the lamp life and heat. The cooling fans and air vents are provided to result in severe accident or fire hazard. dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust Positioning Precautions from g
Inhaltszusammenfassung zur Seite Nr. 8
Safety Instructions Moving the Projector For safety, be sure to hold Carrying Handles on both sides by 2 or more people when moving a projector. Moving it improperly may result in damage of cabinet or person's injury. CARRYING Replace lens cap and retract feet to prevent HANDLE damage to lens and cabinet. Pull up lock buttons on each side of carrying 1 handles to release locks. Pull carrying handles out fully until the handles 2 click. Move a projector by holding two handles by 2 or more
Inhaltszusammenfassung zur Seite Nr. 9
Compliance Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful i
Inhaltszusammenfassung zur Seite Nr. 10
Part Names and Functions Front i q q Infrared Remote Receiver (Front) w Lens Cap (Option) e Projection Lens (Option) r Level and Pitch Adjust Handle t Carrying Handle y Side Control u Main On/Off Switch i Power Cord Connector o Indicator (Rear) u o e r t y w CAUTION Back !1 Hot air is exhausted from the exhaust !2 vent. Do not put heat-sensitive objects near this side. !0 Exhaust Vent !1 Infrared Remote Receiver (Rear) !2 Lamp Cover !3 Indicator (Front) !0 !3 !4 Air Intake Vent !5 Adjustab
Inhaltszusammenfassung zur Seite Nr. 11
Part Names and Functions Input / Output Terminals and Jacks y q w t SERIAL PORT IN DIGITAL (DVI-D) ANALOG SERIAL PORT OUT S-VIDEO H/HV G B R V ▼ VIDEO/Y Pr/Cr Pb/Cb R/C JACK USB L RESET e r ✽ u i t DVI INPUT TERMINAL q SERIAL PORT IN TERMINAL Connect computer output (Digital/DVI-D type) to If you control a projector by computer, you must this terminal. (Refer to p.20) connect a cable (not supplied) from your computer HD (HDCP Compatible) signal can be also to this terminal. connected.
Inhaltszusammenfassung zur Seite Nr. 12
Part Names and Functions Side Control and Indicators FRONT INDICATORS REAR INDICATORS SIDE CONTROLS Side Controls ZOOM FOCUS ON/STAND-BY q t y u LENS SHIFT INPUT 1/2 MENU w i INPUT 3/4 SELECT e o !0 !1 r AUTO PC ADJ. IMAGE SEL. q ZOOM buttons u button LENS SHIFT Zoom in and out the images. (p.27) Select the LENS SHIFT function. (p.27) w button MENU i button INPUT 1/ Open or close the On-Screen MENU. (p.25, 26) Select an input source either INPUT 1 or INPUT 2. (pp.30-32) e butt
Inhaltszusammenfassung zur Seite Nr. 13
LAMP READY WARNING TEMP. LAMP REPLACE LAMP READY WARNING TEMP. LAMP REPLACE Part Names and Functions Indicators Front Indicators q w LAMP q LAMP Indicator This indicator is dim when a projector is turned on. e And bright when a projector is in stand-by mode. READY (pp.68-69) WARNING TEMP. w READy indicator r This indicator lights green when a projector is LAMP REPLACE ready to be turned on. And it flashes green in Power Management mode. (pp.51, 68-69) e WARNING TEMP . indicator This
Inhaltszusammenfassung zur Seite Nr. 14
Part Names and Functions Remote Control q ON/STAND-By button Turn the projector on or off. (p.23) q e w w AUTO PC button Automatically adjust the computer image to its optimum setting (pp.28, 34). e LIGHT button Light the buttons on the remote control for about 10 seconds. r !1 r MENU button t Open or close the On-Screen MENU. (pp.25-26) t POINT ed 7 8 buttons !2 –Select an item or adjust the v alue in The ON-SCREEN MENU. –Pan the image in DIGITAL ZOOM +/– mode. (p.39) y !3 y LEN
Inhaltszusammenfassung zur Seite Nr. 15
Part Names and Functions Remote Control Battery Installation Open the battery Install new batteries into Replace the compartment lid. the compartment. compartment lid. 1 2 3 Two AA size batteries For correct polarity (+ and –), Pull up the lid be sure battery terminals are and remove it. in contact with pins in the compartment. To insure safe operation, please observe the following precautions : ● Use two (2) AA or LR6 type alkaline batteries. ● Always replace batteries in sets. ● Do not
Inhaltszusammenfassung zur Seite Nr. 16
Part Names and Functions Remote Control Code The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 50. Check the Reset Switch to "Use po
Inhaltszusammenfassung zur Seite Nr. 17
Installation Lens Installation Before setting up a projector, install Projection Lens on a Projector. 1. B efore installation, check where a projector is used and prepare a suitable lens. For the specifications of Projection Lens, refer to the manual attached separately or contact sales dealer where you purchased the projector. 2. For installation, refer to the installation manual accompanying a Projector. When setting a projector after lens installation, be sure to replace a Lens Cap to prote
Inhaltszusammenfassung zur Seite Nr. 18
Installation Lens Shift Adjustment Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function makes the positioning of images easy on the screen.(See page 27) The display position can be shifted upward up to 50% elevation of the display. The display position can be shifted downward up to 50% low level of the display. When the lens is shifted to bottom . When the lens is shifted to top . The display position can be The display pos
Inhaltszusammenfassung zur Seite Nr. 19
Installation Terminals of Projector This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards. For Terminal Boards, contact sales dealer where you purchased a projector. 4 TERMINAL SLOTS (Factory set) SERIAL PORT IN ANALOG DIGITAL (DVI-D) DVI / D-sub 15 Terminal SERIAL PORT OUT
Inhaltszusammenfassung zur Seite Nr. 20
Installation Connecting to Computer Cables used for connection • VGA Cable (D-sub 15 pin) * • DVI Cable • BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.) Desktop type Laptop type Monitor Output Monitor Output Monitor Output BNC Cable ✽ VGA Cable DVI Cable G B H/HV V R ANALOG DIGITAL SERIAL PORT IN DIGITAL DVI-D) ANALOG Terminals of SERIAL PORT OUT S-VIDEO vG B R H/HV V a Projector VIDEO/Y Pb/Cb Pr/Cr R/C JACK USB RESET Unplug the power
