Inhaltszusammenfassung zur Seite Nr. 1
Real Time DVR user manual
SHR-6040
SHR-6042
English
Real Time DVR
user manual
imagine the possibilities
AB82-01484A Rev-02 TK
SHR-6042_Eng-Cover.indd 1 2009-06-12 오후 6:05:18
Inhaltszusammenfassung zur Seite Nr. 2
key features of your DVR Your purchased digital video recorder (DVR) compresses a 4-channel camera input into an MPEG4 video; also, it provides the functions that record to the HDD in real-time and play the content by compressing the 4-channel audio input with G.723. Also through the network, it transmits video and audio to an external device in real-time and allows monitoring the video and audio through a PC from a remote location. 4-Channel Composite Input Connectors NTSC/PAL Video Sou
Inhaltszusammenfassung zur Seite Nr. 3
safety regulations Please be sure to keep the following in mind for the right use of the product to prevent proprietary risk or damage. Do not use multiple plugs at once. This may cause abnormal heat generation or fire Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you. This may cause fire. Do not bend the power cord forcibly nor put a heavy material on it. This may cause fire. Do not touch the power plug with wet hands. This may cause ele
Inhaltszusammenfassung zur Seite Nr. 4
before start This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: SEC retains the copyright on this manual. This manual cannot be copied without SEC’s prior written approval. We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.
Inhaltszusammenfassung zur Seite Nr. 5
contents 03 Controls on the DVR INTRODUCING YOUR REAL TIME DVR 07 Real panel jacks 08 Remote control 03 10 Checking installation environment INSTALLATION 10 11 Connecting video, audio, and monitor CONNECTING WITH OTHER DEVICES 12 Connecting the network 13 Connecting the alarm input 14 Connecting the alarm output 15 Connecting the RS-485 device 11 15 Connecting the USB 16 Operating the system LIVE 16 Live screen mode 18 Setting the audio on/off 18 Freezing and zooming 16 19 Event
Inhaltszusammenfassung zur Seite Nr. 6
45 User login SEARCH AND PLAY 45 Search screen 45 Search date & time selection 46 Search channel selection & recording graph 45 46 Playback 48 Net I APPENDIx 53 System 55 Camera 56 Monitoring Mode 48 56 Recording Mode 57 Event Recording Mode 59 Network 60 SDB Viewer 63 SFx player 63 WEB Viewer 75 Pop-up menu 77 Specifications 78 Outline drawings 79 Troubleshootings(FAQ) 81 Open source license report on the product 02_ contents SHR-6042_Eng.indb 2 2009-06-05 오전 11:23:25
Inhaltszusammenfassung zur Seite Nr. 7
01 INTRODUCINg YOUR ReAL TIme DVR introducing your real time DVR CONTROLS ON THE DVR S H R - 6 0 4 0 17 16 15 14 13 12 10 1 2 3 4 5 6 7 8 9 S H R - 6 0 4 2 17 16 15 14 13 12 11 10 1 2 3 4 5 6 7 8 9 introducing your real time DVR_03 SHR-6042_Eng.indb 3 2009-06-05 오전 11:23:25
Inhaltszusammenfassung zur Seite Nr. 8
No. Name Function User authentication will be requested if the power button is pressed when 1 P o w e r Button you try to terminate the system operation. It is used when you turn on/off the DVR system power. This is the port used for connecting a USB type of device. 2 USB Port It is used when you upgrade the system software. It is used as a USB mouse connection port. It is used when the channel selected on the Display mode is switched over 3 C h a n n e l Button to the full screen. It is use
Inhaltszusammenfassung zur Seite Nr. 9
01 INTRODUCINg YOUR ReAL TIme DVR No. Name Function A L A R M L E D If an event (like a motion or alarm) occurs, the ALARM LED is lighted on. This LED indicates whether the HDD is normally accessed. When accessing H D D L E D the HDD, this LED repeatedly blinks. N E T W O R K 10 This LED indicates the status of network connection and data transmission. L E D B A C K U P L E D This LED indicates the status of backup operation. R E C L E D This LED indicates the recording status. 11 E
Inhaltszusammenfassung zur Seite Nr. 10
No. Name Function Display the 4-split screens. Display the Picture in Picture (PIP) screen. S p l i t S c r e e n / L i v e M o d e S e l e c t i o n Button Screen Switchover: It will be switched over 16 to the single channel screen according to the time set from the system setup. Display the 4-split screens. S e a r c h M o d e / S e a r c h S e l e c t i o n M o d e Button Display the 9-split screens. R e m o t e 17 C o n t r o l S i g n a l s This is the part that receives
Inhaltszusammenfassung zur Seite Nr. 11
01 INTRODUCINg YOUR ReAL TIme DVR REAL PANEL jACKS 8 9 10 7 6 5 4 3 2 1 1 DC-IN This is the connector for a 12V power socket. ALARM IN 1~4: This is the port for an alarm input. 2 ALARm/RS485 ALARM OUT 1~2: This is the port for an alarm output. RS485: This is the port for connecting PTZ. This is the port for connecting a USB type of device. 3 USB It is used when you backup a video data or upgrade the system software. AUDIO OUT: This is the port (RCA Jack) for an audio signal output. 4 AUDIO (W
Inhaltszusammenfassung zur Seite Nr. 12
REmOTE CONTROL 08_ introducing your real time DVR SHR-6042_Eng.indb 8 2009-06-05 오전 11:23:27 Using the NUMERIC Buttons CHANNeL 1–9 Press the 1 to 9 button respectively. Press the 0(10+) button, release, and press the 0 button again within 3 seconds.Or press the 0(10+) button, release, and wait 3 CHANNeL 10 seconds. CHANNeL 11–16 Press the 0(10+) button, release, and press the 1 (or 2, 3, 4, 5, 6) button again within 3 seconds. ReCORD OPeN/CLOSe Starts or ends the recording. Used to o
Inhaltszusammenfassung zur Seite Nr. 13
01 INTRODUCINg YOUR ReAL TIme DVR REmOTE CONTROL introducing your real time DVR_09 SHR-6042_Eng.indb 9 2009-06-05 오전 11:23:27 FR (fast rewind) FF (fast forward) FR (fast reverse): Used for quick Used for quick forward search backward search while in play. while in play. (x2, x4, x8, x16, (-x2, -x4, -x8, -x16, -x32) x32) STOP Play/Pause Ends playing. Pauses or resumes playing. ZOOm FReeZe Implements the digital zoom Performs the FREEZE function (x2). in live mode. meNU SeARCH Go
Inhaltszusammenfassung zur Seite Nr. 14
installation You should pay attention to the following before you use the product. Do not use it outdoor. Do not place water or liquid near the connection part or the product. Do not impose excessive shock or force. Do not pull out the power cord unreasonably. Do not disassemble the product on your own. Do not exceed the rated input or output voltage range. Use the certified power cord only. For the product with an input ground, use a power plug with a ground p
Inhaltszusammenfassung zur Seite Nr. 15
03 CONNeCTINg WITH OTHeR DeVICeS connecting with other devices CONNECTING VIDEO, AUDIO, AND mONITOR Audio output Video in Audio input Depending on whether or not the power cable is grounded, there could be high voltage electricity flowing through the video cables connected to the camera. Therefore, it’s important that you connect the video cables Caution to the VIDEO IN terminal with the system’s power turned off. connecting with other devices _11 SHR-6042_Eng.indb 11 2009-06-05 오전 11:
Inhaltszusammenfassung zur Seite Nr. 16
CONNECTING THE NETWORK Connecting to Internet through Ethernet (10/100BaseT) RJ45 Ethernet Cable (Direct Cable) INTeRNeT Back Bone Hub/Switcher Hub/Switcher Windows NET-i Connecting to Internet through ADSL RJ45 Ethernet Cable (Direct Cable) INTeRNeT Phone(ADSL) Line ADSL MODEM Hub/Switcher Windows NET-i 12_ connecting with other devices SHR-6042_Eng.indb 12 2009-06-05 오전 11:23:33
Inhaltszusammenfassung zur Seite Nr. 17
03 CONNeCTINg WITH OTHeR DeVICeS CONNECTING THE ALARm INPUT Connect one wire of the signal cable (2 wires) of various sensors (such as IR sensor, hot-wire detector and magnetic sensor) to the GROUND port and connect the remaining signal wire to the desired ALARM input port number. Please use the power ADAPTER suitable to the power specifications of various sensors. Caution connecting with other devices _13 SHR-6042_Eng.indb 13 2009-06-05 오전 11:23:34
Inhaltszusammenfassung zur Seite Nr. 18
CONNECTING THE ALARm OUTPUT Such as siren-lamp, amplified siren and external relay External Power Connect one wire of the signal cable (2 wires) of an external device (such as siren-lamp, amplified siren and external relay) to the GROUND port and connect the remaining signal wire to the desired ALARM output port number. 14_ connecting with other devices SHR-6042_Eng.indb 14 2009-06-05 오전 11:23:34
Inhaltszusammenfassung zur Seite Nr. 19
03 CONNeCTINg WITH OTHeR DeVICeS CONNECTING THE RS-485 DEVICE Port for connecting the RS-485 signal wire (connect to the Rx-Receiver) Please check that the RS-485 device is supported by the SHR-6040/6042 product. And, a caution shall be made when connecting to the RS-485 jack since it has the polarity (+ and –). Caution CONNECTING THE USB 1. It has a total of 2 USB connection ports on the front and rear sides of SHR-6040/6042. 2. Connect the USB HDD, USB memory through the front/rear ports
Inhaltszusammenfassung zur Seite Nr. 20
live OPERATING THE SYSTEm LIVE SCREEN mODE Turn on the power and the following Samsung logo appears. Live screen icons The live screen icon indicates the setup and function status of each screen. Perform the initialization job to operate the system after the logo screen has appeared. CAM_01 The live video appears if the initialization process is normally completed. It may take about 40 to 60 seconds until the live video appears. When the live video appears, the system setup
