Bedienungsanleitung ATD Tools RHO-10133

Inhaltszusammenfassung zur Seite Nr. 1

Owner's Manual
Garage Jack
Model Capacity
RHO-10113
3 Ton
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

!
Obey all safety messages that follow this symbol to avoid possible injury or death.
! ADVERTENCIA ! WARNING
To avoid crushing and related injuries:
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
NEVER work on, under or around a
• El manual de instrucciónes y la información de
load supported only by a hyd

Inhaltszusammenfassung zur Seite Nr. 2

SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native

Inhaltszusammenfassung zur Seite Nr. 3

OPERATION Lifting Only attachments and/or adapters supplied Jack Handle Oil Filler Plug ! by the manufacturer shall be used. Lift only (not shown, on reservoir) on area of the vehicle as specified by the vehicle manufacturer. Lifting Arm 1. Follow the vehicle manufacturer’s recommended Saddle guidelines for lifting. Engage the emergency brake Speed Handle and chock each unlifted wheel in both directions to prevent inadvertent vehicle movement. 2. Close the release valve by turning

Inhaltszusammenfassung zur Seite Nr. 4

MAINTENANCE Important: Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. We recommend Mobil DTE 13M or equivalent. Adding oil 1. With saddle fully lowered set jack in its upright, level position. Remove oil filler plug. 2. Fill with oil until ~3/16" above the inner cylinder as se

Inhaltszusammenfassung zur Seite Nr. 5

REPLACEMENT PARTS Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give model number, serial number and description below. Call or write for current pricing: Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385. Tel:(636)327-9050 Fax:(636)327-9044 Model RHO-10113 Item Description Quantity 1 Power Unit 1 2 Front Wheel Assembly 2 3 Rear Caster Assembly

Inhaltszusammenfassung zur Seite Nr. 6

90 DAYS LIMITED WARRANTY For a period of ninety (90) days from date of purchase, Atd Tools Inc. will repair or replace, at its option, without charge, any of its products, which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to Atd Tools Inc. Warranty Service Department,160 Enterprise Drive, Wentz