Bedienungsanleitung Eiki Movement Sensor A-3

Inhaltszusammenfassung zur Seite Nr. 1

Eiki A-3


Movement sensor


Instruction Manual





Package contents
Item Qty.
Movement sensor 1
Manual 1

Inhaltszusammenfassung zur Seite Nr. 2

V:E1.01 To the InstallerR Thank you for choosing Eiki A-3. Mounting The A-3 uses passive infra-red technology Choose a location on a wall that is to detect movement in a room. It is preferably 3 to 4 metres from the floor, not intended to be used with the Eiki range of adjacent to heating or air conditioning control systems to automatically shut outlets or opposite windows and where down equipment in the room after a period people moving in the room can be “seen” of time when

Inhaltszusammenfassung zur Seite Nr. 3

Wiring Testing Connect the terminals as shown in the With the cover fitted, apply power and wait at diagram to the control panel or access least 30 seconds. After this time, if there is port. no movement, the LED should go out. Once this has happened, any movement should You do not need to connect the tamper cause a couple of rapid flickers and the LED switch terminals. should lock on for about 5 seconds. GND Walk around the room and check that your +12v movement can be reliably dete

Inhaltszusammenfassung zur Seite Nr. 4

U.S.A. Canada EIKI International, Inc. EIKI CANADA - Eiki International, Inc. 30251 Esperanza P.O. Box 156, 310 First St. - Unit 2, Rancho Santa Margarita Midland, ON, L4R 4K8, Canada CA 92688-2132 Tel : 800-563-3454 (705)-527-4084 U.S.A. Fax : 800-567-4069 (705)-527-4087 Tel : 800-242-3454 (949)-457-0200 E-Mail : canada@eiki.com Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com Deutschland & Österreich Eastern Europe EIKI Deutschland GmbH EIKI CZECH spol. s.r.