Bedienungsanleitung Invacare Head and Torso Supports 3045

Inhaltszusammenfassung zur Seite Nr. 1

Head and Torso Supports
Assembly, Installation and Operating Instructions
Model Nos. 1164, 3040 (Torso Supports) and
Model Nos. 3045, 3046 (Head Supports)
SAVE THESE INSTRUCTIONS
SAFETY SUMMARY
WARNING/CAUTION notices as used in this manual apply to hazards or
unsafe practices which could result in personal injury or property damage.
NOTICE
The information contained in this document is subject to change without notice.
WARNING
DO NOT install, maintain or operate this equipment without reading,

Inhaltszusammenfassung zur Seite Nr. 2

Bracket Clamp (Item 7) Adjustment Bracket Assembly (Item 9) Lug Screw (Item 10) Locknut (Item 11) 2. LEFT or RIGHT adjustments can be accomplished by loosening the socket screw (Item 6) on the adjustable bracket assembly (Item 9 - Model No. 3045) (Item 7 - Model 3046) with an Allen wrench. 3. UP or DOWN adjustment are made by loosening the lug screw and the locknut (Items 10 and 11). 4. FRONT and BACK adjustments are made by loosening the socket screw (Item 6) on the bracket clamp (Item 7 - Mode

Inhaltszusammenfassung zur Seite Nr. 3

3. UP or DOWN adjustment are made by loosening the lug screw and the locknut (Items 10 and 11). 4. FRONT and BACK adjustments are made by loosening the socket screw (Item 6) on the bracket clamp (Item 7 - Model No. 1164 Only). NOTE: Model No. 3040 has no front-to-back adjustment. TORSO SUPPORTS 1 1 Left or Right Adjustment 2 Left or Right 1 Adjustment 5 6 Front or Back 6 8 Adjustment 3 3 7 7 Up and Down Up and 10 11 10 11 Adjustment Down Adjustment MODEL NO. 1164 MODEL NO. 3040 FIGURE 2 - INSTAL