Inhaltszusammenfassung zur Seite Nr. 1
Impact Wrench
12.7 mm (1/2”)
MODEL 6905H
002289
DOUBLE
INSULATION
INSTR U CTION MANU AL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Inhaltszusammenfassung zur Seite Nr. 2
SPECIFICATIONS Model 6905H Standard bolt M12 - M20 (1/2” - 3/4”) Capacities High tensile bolt M12 - M16 (1/2” - 5/8”) Square drive 12.7 mm (1/2”) No load speed (RPM) 2,200/min. Impacts per minute 2,600 Max. fastening torque 294 N.m (217 ft.lbs) Overall length 275 mm (10-13/16”) Net weight 2.3 kg (5 lbs) • Manufacturer reserves the right to change specifications without notice. Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and und
Inhaltszusammenfassung zur Seite Nr. 3
change the plug in any way. Double insula- be used for appropriate conditions. Ordinary eye or sun glasses are NOT eye protection. tion eliminates the need for the three wire grounded power cord and grounded power Tool Use and Care supply system. 15. Use clamps or other practical way to 5. Avoid body contact with grounded sur- secure and support the workpiece to a faces such as pipes, radiators, ranges and stable platform. Holding the work by hand or refrigerators. There is an increased risk of
Inhaltszusammenfassung zur Seite Nr. 4
USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage num- ber, the heavier the cord. Table 1: Minimum gage for cord V
Inhaltszusammenfassung zur Seite Nr. 5
FUNCTIONAL CAUTION: DESCRIPTION Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 002313 Switch action CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” 1 position when released. To start the tool, simply pull the switch trigger. Release the switch trigger to stop. 1. Switch trigger 002323 Reversing switch action This tool has a reversing switch to change th
Inhaltszusammenfassung zur Seite Nr. 6
002337 Installing or removing socket To install the socket, push it onto the anvil of the tool until it 1 locks into place. To remove the socket, simply pull it off. 2 1. Socket 2. Anvil The proper fastening torque may differ depending upon the OPERATION kind or size of the bolt, the material of the workpiece to be fastened, etc. The relation between fastening torque and fas- tening time is shown in the figures. Standard bolt N.m (ft.lbs) 200 M20 (3/4”) (144) M20X50 (3/4” X 2”) 150 (108) M16X
Inhaltszusammenfassung zur Seite Nr. 7
High tensile bolt N.m (ft.lbs) 300 (217) 250 M16 (5/8”) (181) 200 (144) M16X50 (5/8” X 2”) 150 (108) M12 (7/16”) 100 (72) M12X50 (7/16” X 2”) 50 (36) 0 1 2 345 67 8 (S) Fastening time Hold the tool firmly and place the socket over the bolt or nut. Turn the tool on and fasten for the proper fastening time. NOTE: Hold the tool pointed straight at the bolt or nut. Excessive fastening torque may damage the bolt/nut or socket. Before starting your job, always perform a test operation to de
Inhaltszusammenfassung zur Seite Nr. 8
Even though the diameters of bolts are the same, the proper fastening torque will differ according to the torque coefficient, the class of bolt and the bolt length. 4. The use of the universal joint or the extension bar some- what reduces the fastening force of the impact wrench. Compensate by fastening for a longer period of time. 5. The manner of holding the tool or the material of driving position to be fastened will affect the torque. MAINTENANCE CAUTION: Always be sure that the tool is
Inhaltszusammenfassung zur Seite Nr. 9
First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold 9 Cut
Inhaltszusammenfassung zur Seite Nr. 10
MAIL THIS PORTION Your answers to the following questions are appreciated. 1. This product was purchased from: 3. How did you learn about this product: Home Center Other ( ) Magazine Radio Hardware/Lumber Store From Dealer Exhibition Tool Distributor Newspaper From Friend Industrial Supply Store Display Previous Usage Construction Supply Catalog Other ( ) 2. Use of the product is intended for: 4. Most favored points are: Construction Trade Design Repair Se
Inhaltszusammenfassung zur Seite Nr. 11
FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA FLORIDA MISSOURI PENNSYLVANIA 3707 E. Broadway Rd., Ste. 6 750 East Sample Road 9876 Watson Road 1704 Babcock Blvd. Phoenix, AZ 85040 Pompano Beach, FL 33064 St. Louis, MO 63126-2221 Pittsburgh, PA 15209 (602) 437-2850 (954) 781-6333 (314) 909-9889 (412) 822-7370 CALIFORNIA GEORGIA NEBRASKA PUERTO RICO 41850 Christy St. 4680 River Green Parkway NW 4129 S. 84th St. 200 Guayama St. Fremont, CA 94538-5107 Duluth,
Inhaltszusammenfassung zur Seite Nr. 12
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of
