Bedienungsanleitung Snapper LT145H33FBV, LT145H38FBV

Bedienungsanleitung für das Gerät Snapper LT145H33FBV, LT145H38FBV

Gerät: Snapper LT145H33FBV, LT145H38FBV
Kategorie: Rasenmäher
Produzent: Snapper
Größe: 1.08 MB
Datum des Hinzufügens: 5/6/2014
Seitenanzahl: 44
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Snapper LT145H33FBV, LT145H38FBV zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Snapper LT145H33FBV, LT145H38FBV finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Snapper LT145H33FBV, LT145H38FBV auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Snapper LT145H33FBV, LT145H38FBV im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Snapper LT145H33FBV, LT145H38FBV auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Snapper LT145H33FBV, LT145H38FBV Handbuch - Online PDF
Advertisement
« Page 1 of 44 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Snapper LT145H33FBV, LT145H38FBV Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Snapper LT145H33FBV, LT145H38FBV befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

Safety Instructions & Operator’s Manual for
LAWN TRACTOR
HYDROSTATIC DRIVE
SERIES F



MODELS
HYDROSTATIC DRIVE
LT145H33FBV
LT145H38FBV










MODEL NUMBER EXPLANATION

LT 145 H 38 F B V

MODEL DESIGNATION
ENGINE HP ENGINE TYPE
DRIVE SYSTEM TYPE ENGINE MODEL
CUTTING WIDTH SERIES DESIGNATION

LT – Lawn Tractor Model Designation 38 – 38” Cutting Width Mower
145 - 14.5 HP Engine Horse Power F – Series Designation
H – Hydrostatic Transmission B – Briggs & Strat

Inhaltszusammenfassung zur Seite Nr. 2

IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind

Inhaltszusammenfassung zur Seite Nr. 3

IMPORTANT SAFETY INSTRUCTIONS PREPARATION OPERATION (Continued From Previous Page) (Continued From Previous Column) 7. Keep people and pets out of mowing area. 14. Exercise CAUTION when pulling loads. Limit Immediately STOP blades, STOP engine, and loads to those you can safely control and attach STOP machine if anyone enters the area. loads to hitch plate as specified with SNAPPER 8. Check shields, deflectors, switches, blade attachment instructions. controls and other safety devi

Inhaltszusammenfassung zur Seite Nr. 4

TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS..........2 - 3 SECTION 4 - ADJUSTMENTS & REPAIR........................... 16-30 Engine Adjustments & Repair ..........................16 TABLE OF CONTENTS........................................ 4 Mower Deck & Component Adjustments........16 Blade Brake Adjustment ...................................16 SECTION 1 - FAMILIARIZATION ......................... 5 Components ........................................................5 33”

Inhaltszusammenfassung zur Seite Nr. 5

Section 1 - FAMILIARIZATION CONTROL PANEL PARK BRAKE CHOKE FAST LEVER SLOW CLUTCH/BRAKE DOWN PEDAL KEY ENGINE SPEED CUTTING HEIGHT OPERATOR’S CONTROL ADJUSTMENT LEVER SEAT STEERING SEAT WHEEL ADJUSTMENT KNOB SPEED DASHBOARD CONTROL CONTROLS LEVER FUEL TANK (UNDER HOOD) BATTERY (UNDER SEAT) HOOD BLADE ENGAGEMENT LEVER HEADLIGHTS DISCHARGE DEFLECTOR MOWING DECK (33” SH

Inhaltszusammenfassung zur Seite Nr. 6

Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as required before each start-up. 2.1.1. Check tires and add air as needed to bring FUEL TANK pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires. 2.1.2. Check guards, deflectors and covers to make sure all are in place and securely tightened. If guards are missing or damaged, replace BEFORE using mower. 2.1.3. Check engine oil and add oil as nee

Inhaltszusammenfassung zur Seite Nr. 7

Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 5. Choke engine for cold starting by moving engine speed control to "CHOKE" position. Little or no 2.3.1. STARTING ENGINE choking will be needed when restarting a warm 1. Take a comfortable position in seat of machine, engine. Insert key in switch. Turn key to "START" look around to make sure that the area you are going to position to crank engine and hold until engine starts, mow is clear of people, children and pets. Take n

Inhaltszusammenfassung zur Seite Nr. 8

Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (continued) 2.4 STOPPING ENGINE, BLADE, WHEEL DRIVE 2.3.2. STARTING WHEEL DRIVE 2.4.1 STOPPING ENGINE 1. Shift speed control lever to neutral. 1. Stop engine by turning key to the "OFF" position. See Figure 2.9. 2. Start engine. Refer to Section “STARTING ENGINE”. 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion. See RUN OFF START Figure 2.7

Inhaltszusammenfassung zur Seite Nr. 9

Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.5. RELEASING PARK BRAKE 2.4.3. STOPPING MOWER BLADE 1. Fully depress clutch/brake pedal. Move park brake lever “DOWN” to release park brake. Release 1. Stop mower blade by moving blade engagement lever to the "OFF" position. See Figure 2.11. clutch/brake pedal. See Figure 2.13. PARK BRAKE LEVER CLUTCH/BRAKE BLADE PEDAL ENGAGEMENT LEVER OFF FULLY DEPRESS CLUTCH/BRAKE FIGURE 2.11 PEDAL WARNING FIGURE 2.13 Onc

Inhaltszusammenfassung zur Seite Nr. 10

Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.15. PULL ROLL RELEASE CONTROL ALL THE WAY OUT TO DISENGAGE HYDRO TRANSMISSION ROLL RELEASE CONTROL PUSH ROLL RELEASE ROLL RELEASE CONTROL ALL THE WAY CONTROL IN TO

Inhaltszusammenfassung zur Seite Nr. 11

Section 3 - MAINTENANCE 3.1 INTRODUCTION 4. Check blade for straightness. Refer to Section To retain the quality of the Tractor, use genuine SNAPPER “ADJUSTING MOWER BLADE”. replacement parts only. Contact a local SNAPPER dealer 5. Check torque of blade mounting bolts. Torque to: for parts and service assistance. For the correct part or 33” deck – 30 to 40 ft. lbs. See Figure 3.2. information for a particular Tractor, always mention the model 38” deck – 70 to 80 ft. lbs. See Fig

Inhaltszusammenfassung zur Seite Nr. 12

Section 3 - MAINTENANCE 3.2.3. CHECK MOWER BLADE (Continued) 3.3 SERVICE - EVERY 25 OPERATING HOURS 3.3.1. CHECK ENGINE 1. Change engine oil. Refer to Section “CHANGE ENGINE OIL”. Refer to engine owner's manual for oil specification. 2. Remove and clean engine air pre-cleaner. See Figure 3.5. Refer to engine owner's manual for cleaning instructions. ENGINE AIR CLEANER TORQUE 38” BLADES TO 70 TO 80 FT. LBS. FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT ENGINE AIR 1. With en

Inhaltszusammenfassung zur Seite Nr. 13

Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION 4. Steering Sector Gear 1. Front Wheel Bearings Lubricate with a light coat of general purpose grease. See Figure 3.8. Lubricate each front wheel bearing through the grease fitting on wheel hub. Using general purpose grease in a grease gun, add grease until grease FUEL TANK purges from bearing. See Figure 3.6. STEERING SECTOR AXLE SPINDLE LUBRICATION FITTING SECTOR GEAR FRONT WHEEL BEARING LUBRICATION FITTING FIGURE 3.6

Inhaltszusammenfassung zur Seite Nr. 14

Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION (Continued From Previous Page) 7. Steering Tie Rod Lubricate both ends of steering tie rod with a small amount of SAE30 oil. See Figure 3.10. PARK BRAKE LEVER LUBRICATE LUBRICATE COMPONENTS BOTH ENDS ON UNDERSIDE OF TRACTOR OF TIE ROD FIGURE 3.12 10. Deck Lift Mechanism Lubricate all wear and pivot points of the deck lift 3.4 SERVICE - ANNUALLY Perform all maintenance as described in Section “SERVICE - EVERY 25 OPERATI

Inhaltszusammenfassung zur Seite Nr. 15

Section 3 - MAINTENANCE 3.4 SERVICE - ANNUALLY 3.4.2. FUEL FILTER (Continued From Previous Page) 3. Install new fuel filter part number 1-4359. See Figure 3.14. NEW FUEL FILTER PART NUMBER 1-4359 FIGURE 3.14 4. Fill fuel tank with fresh gasoline. Refer to engine owner's manual for fuel specifications. 3.4.3. SPARK PLUG Remove and replace engine spark plug. Refer to engine owner's manual for correct replacement plug and

Inhaltszusammenfassung zur Seite Nr. 16

Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool. 4.1 ENGINE ADJUSTMENTS & REPAIR Refer to the engine owner's manual for those adjustments and/or repairs that can be

Inhaltszusammenfassung zur Seite Nr. 17

Section 4 - ADJUSTMENT & REPAIR 8. (33" Deck) To adjust tension, remove extension rod WARNING mounting bolt and nut. See Figure 4.4. DO NOT attempt any adjustments, maintenance or 9. Move extension rod to next hole towards rear of service with the engine or blade running. STOP blade. deck and secure with mounting bolt and nut. STOP engine. Set brake. Remove key. Remove spark 10. Measure extension spring with blade engagement plug wire from spark plug and secure wire away from lever i

Inhaltszusammenfassung zur Seite Nr. 18

Section 4 - ADJUSTMENT & REPAIR 4.2.4. ADJUSTING MOWER BLADE – 33” DECK 4.2.5. 33" DECK LEVEL ADJUSTMENT (SIDE TO SIDE) (Continued from previous page) NOTE: Adjust tire pressure, 12 P.S.I. front and rear, before adjusting deck. 1. Move tractor to a firm, level surface. 2. Turn engine "OFF". Remove key. 3. Place a piece of angle iron under center rear of deck. 4. Remove hair pins and washers securing rear of deck MEASURE THE DISTANCE to sector plates. See Figure 4.7. BETWEEN DECK L

Inhaltszusammenfassung zur Seite Nr. 19

Section 4 - ADJUSTMENT & REPAIR 33” DECK SHOWN WARNING REAR FRONT DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark X + 1/4” plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely MEASURE FROM BLADE hot. Avoid burns by allowing engine and components TIPS TO FLOOR sufficient time to cool. FIGURE 4.11 4.2.5. 33" DECK LEVEL ADJUS

Inhaltszusammenfassung zur Seite Nr. 20

Section 4 - ADJUSTMENT & REPAIR WARNING 38” DECK DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. JAM NUT STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components WASHER sufficient time to cool. FRONT LIFT ROD HAIR PIN 4.2.8. 38" DECK LEVEL ADJUSTMENT (SIDE TO SIDE) NOTE: Befor


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Snapper "MR" SERIES 17 EMRP216517B Handbuch Rasenmäher 22
2 Snapper "MR" SERIES 17 MR216017BV Handbuch Rasenmäher 5
3 Snapper "MR" SERIES 17 MR216517B Handbuch Rasenmäher 8
4 Snapper "MR" SERIES 17 MR216017B Handbuch Rasenmäher 1
5 Snapper "MR" SERIES 17 MRP216017B Handbuch Rasenmäher 3
6 Snapper "MR" SERIES 17 WMR216517B Handbuch Rasenmäher 0
7 Snapper "MR" SERIES 17 WMR216017B Handbuch Rasenmäher 1
8 Snapper "MR" SERIES 17 MRP216517B Handbuch Rasenmäher 2
9 Snapper "MR" SERIES 17 WMR216017BV Handbuch Rasenmäher 1
10 Snapper "MR" SERIES 17 MRP216017BV Handbuch Rasenmäher 1
11 Snapper "MR" SERIES 17 WMRP216017B Handbuch Rasenmäher 0
12 Snapper "MR" SERIES 17 WMRP216517B Handbuch Rasenmäher 1
13 Snapper 0 Handbuch Rasenmäher 0
14 Snapper 0-7001 Handbuch Rasenmäher 2
15 Snapper 06124 Handbuch Rasenmäher 0
16 2Wire 7-1/4 Inch Circular Saw 94245 Handbuch Rasenmäher 3
17 Agilent Technologies E4371A Handbuch Rasenmäher 0
18 Agilent Technologies E4370A Handbuch Rasenmäher 3
19 Agilent Technologies E4374A Handbuch Rasenmäher 1
20 Adams 22 Handbuch Rasenmäher 1