Bedienungsanleitung McCulloch MC2042YT

Bedienungsanleitung für das Gerät McCulloch MC2042YT

Gerät: McCulloch MC2042YT
Kategorie: Rasenmäher
Produzent: McCulloch
Größe: 0.89 MB
Datum des Hinzufügens: 12/7/2013
Seitenanzahl: 26
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät McCulloch MC2042YT zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit McCulloch MC2042YT finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung McCulloch MC2042YT auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung McCulloch MC2042YT im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung McCulloch MC2042YT auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
McCulloch MC2042YT Handbuch - Online PDF
Advertisement
« Page 1 of 26 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze McCulloch MC2042YT Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu McCulloch MC2042YT befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

OPERATOR'S MANUAL
MODEL NO. MC2042YT
*
20.0 HP 42 INCH
LAWN TRACTOR
• Assembly
• Operation
• Customer Responsibilities
• Service and Adjustments
• Storage
• Troubleshooting
*As rated by the engine manufacturer
www.mcculloch.biz
532 43 25-62 Rev. 1 Printed in the U.S.A.

Inhaltszusammenfassung zur Seite Nr. 2

SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Slow down before turning. WARNING: In order to prevent ac ci den tal • Never leave a running machine unattended. Always starting when setting up, trans port ing, turn off blades, set parking brake, stop engine, and ad just ing or making repairs,

Inhaltszusammenfassung zur Seite Nr. 3

SAFETY RULES Safe Operation Practices for Ride-On Mowers III. CHILDREN Tragic accidents can occur if the operator is not alert to GENERAL SERVICE the presence of children. Children are often attracted to • Never operate machine in a closed area. the ma chine and the mowing activity. Never assume that • Keep all nuts and bolts tight to be sure the equipment children will remain where you last saw them. is in safe working condition. • Keep children out of the mowing area and in the watchful

Inhaltszusammenfassung zur Seite Nr. 4

CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu fac tured to give you the best possible dependability and performance. Gasoline Capacity 2.50 Gallons and Type: Unleaded Regular Should you experience any problem you cannot easily rem- Oil Type (API-SG-SL): SAE 10W30 (above 32°F) edy, please contact your nearest authorized service center/ SAE 5W30 (below 32°F) department. We have com pe tent, well-trained tech ni cians a

Inhaltszusammenfassung zur Seite Nr. 5

UNASSEMBLED PARTS Slope Sheet Key (1) Oil Drain Tube (2) Keys ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY LABEL A socket wrench set will make assembly easier. Stan dard wrench sizes are listed. (1) 1/2" wrench Tire pressure gauge (2) 7/16" wrenches Utility knife Pliers When right or left hand is mentioned in this man ual, it means when you are in the operating po si tion (sea

Inhaltszusammenfassung zur Seite Nr. 6

ASSEMBLY NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid. ✓CHECKLIST BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE WARNING: Before start ing, read, un der stand and fol low WISH TO ASSURE THAT YOU RECEIVE THE BEST all in struc tions in the Op er a tion section of this man u al. Be PERFORMANCE AND SATISFACTION FROM THIS sure tractor is in a well-ventilated area. Be sure the area in QUALITY PRODUCT. front of tractor is clear

Inhaltszusammenfassung zur Seite Nr. 7

OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. FAST SLOW REVERSE NEUTRAL HIGH LOW CHOKE IGNITION SWITCH P ENGINE ON ENGINE START PARKING BRAKE ENGINE OFF REVERSE PARKING BRAKE PARKING BRAKE OPERATION LOCKED UNLOCKED SYSTEM (ROS) FUEL OIL PRESSURE BATTERY REVERSE FORWARD OVER TEMP MOWER HEIGHT MOWER LIFT LIGHT 15 15 ATTACHMENT ATTACHMENT SLOPE HAZARDS CLUTCH ENGAGED DANGER, KEEP HANDS KEEP AREA CLEAR CLUTCH DI

Inhaltszusammenfassung zur Seite Nr. 8

OPERATION KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. G H D E B F C A J Fig. 4 Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used to raise and lower (F) IGNITION SWITCH - Used for starting and stopping the mow

Inhaltszusammenfassung zur Seite Nr. 9

OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spec- tacles or stan dard safety glasses. IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY HOW TO USE YOUR TRACTOR POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DIS CHARGED (DEAD). TO SET PARK

Inhaltszusammenfassung zur Seite Nr. 10

OPERATION TO ADJUST MOWER CUT TING HEIGHT REVERSE OPERATION SYSTEM (ROS) (See Fig. 9) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse The po si tion of the at tach ment lift le ver (A) de ter mines the direction with the attachment clutch engaged will shut off the cut ting height. engine unless ignition key is placed in the ROS "ON" position. W ARNING: Backing up with the attachment clutch en- gaged while mowing is strongl

Inhaltszusammenfassung zur Seite Nr. 11

OPERATION WARM WEATHER STARTING (50°F/10°C and above) BEFORE STARTING THE ENGINE • When engine starts, move the throttle control to the CHECK ENGINE OIL LEVEL fast position. • The attachments and ground drive can now be used. If The engine in your tractor has been shipped, from the the engine does not accept the load, restart the engine factory, already filled with sum mer weight oil. and allow it to warm up for one minute using the choke • Check engine oil with tractor on level ground.

Inhaltszusammenfassung zur Seite Nr. 12

MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH 8 25 50 100 SEASON STORAGE SCHEDULE USE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure T Check Operator Presence & ROS Systems R Check for Loose Fasteners A Check/Replace Mower Blades 3 C T Lubrication Chart 0 Check Battery Level 4 R Clean Battery and Terminals Clean Debris Off Steering Plate 5 Check Transaxle Cooling Check Mower Levelness Check V-Belts Check Engine Oil Level Change Engine Oil (with oil

Inhaltszusammenfassung zur Seite Nr. 13

MAINTENANCE BLADE CARE TRACTOR For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. CAUTION: Use only a replacement blade ap- BRAKE OPERATION proved by the manufacturer of your tractor. If tractor requires more than five (5) feet to stop at highest Using a blade not approved by the manu- speed in high est gear on a level, dry concrete or paved facturer of your tractor is hazardous, could surface

Inhaltszusammenfassung zur Seite Nr. 14

MAINTENANCE V-BELTS OIL DRAIN VALVE Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not ad just able. Re place belts if they begin to slip from wear. CLOSED AND TRANSAXLE MAINTENANCE LOCKED Keep transaxle free from build-up of dirt and chaff which POSITION can restrict cooling. DRAIN TUBE Do not attempt to clean transaxle while engine is running or while the transaxle is hot. To prevent pos si ble damage to seals, do not use

Inhaltszusammenfassung zur Seite Nr. 15

00667 MAINTENANCE IN-LINE FUEL FILTER (See Fig. 15) DECK WASHOUT PORT (See Fig. 16) The fuel filter should be replaced once each season. If fuel Your tractor’s deck is equipped with a washout port on filter becomes clogged, ob struct ing fuel flow to car bu re tor, its surface as part of its deck wash system. It should be re place ment is re quired. utilized after each use. • With engine cool, remove filter and plug fuel line sec tions. 1. Drive the tractor to a level, clear spot on your la

Inhaltszusammenfassung zur Seite Nr. 16

SERVICE AND ADJUSTMENTS WARNING: TO AVOID SE RI OUS IN JU RY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift lever in neutral position. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. • Ensure the blades and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. IMPORTANT: IF AN ATTAC

Inhaltszusammenfassung zur Seite Nr. 17

SERVICE AND ADJUSTMENTS • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • Insert end of link (E) into hole in front mower bracket CHASSIS - Position hole in arm over pin (B) on outside and secure with washer and retainer spring (J). of tractor chassis and secure with retainer spring. E • Repeat on opposite side of tractor. A J F H B Fig. 21 • Hook end of clutch cable spring (Q) into hole in idler arm (R). Fig. 19 • Push clutch cable housing guide (P) into bracket, slide • ATTACH REAR LIFT LINKS (C

Inhaltszusammenfassung zur Seite Nr. 18

SERVICE AND ADJUSTMENTS • If adjustment is necessary, see step in Visual Adjust- TO LEVEL MOWER ment instructions above. Make sure tires are properly inflated to the PSI shown on • Recheck measurements, adjust if necessary until both tires. If tires are over or under inflated, it may affect the sides are equal. appearance of your lawn and lead you to think the mower is not adjusted properly. FRONT-TO-BACK ADJUSTMENT (See Figs. 26 & 27) VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 24) IMPORTANT:

Inhaltszusammenfassung zur Seite Nr. 19

SERVICE AND ADJUSTMENTS TO REPLACE MOTION BELT DRIVE TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 29) (See Fig. 28) Park the tractor on level surface. En gage parking brake. The mower blade drive belt may be replaced without tools. For as sis tance, there is a belt installation guide decal on Park the tractor on level surface. Engage parking brake. bottom side of left footrest. BELT REMOVAL BELT REMOVAL • Remove mower from tractor (See “TO REMOVE • Remove mower (See “TO RE MOVE M

Inhaltszusammenfassung zur Seite Nr. 20

SERVICE AND ADJUSTMENTS • Replace washers and snap retaining ring securely in TRANSAXLE GEAR SHIFT LEVER NEU TRAL- axle groove. ADJUSTMENT (See Fig. 30) • Replace axle cover. The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment NOTE: To seal tire punctures and prevent flat tires due to is preset at the factory; however, if adjustment is needed, slow leaks, tire sealant may be purchased from your local proceed as follows: parts


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 McCulloch 14592RB Handbuch Rasenmäher 57
2 McCulloch 250 B Handbuch Rasenmäher 13
3 McCulloch 12592RB Handbuch Rasenmäher 28
4 McCulloch 532 40 80-72 Handbuch Rasenmäher 11
5 McCulloch 532 42 41-96 Handbuch Rasenmäher 10
6 McCulloch 532 42 27-27 Rev. 2 Handbuch Rasenmäher 9
7 McCulloch 532 43 13-20 Rev. 3 Handbuch Rasenmäher 1
8 McCulloch 532 43 18-99 Rev. 1 Handbuch Rasenmäher 3
9 McCulloch 422800 Handbuch Rasenmäher 2
10 McCulloch 4051CM Handbuch Rasenmäher 4
11 McCulloch 532 43 22-10 Handbuch Rasenmäher 2
12 McCulloch 532 43 20-26 Handbuch Rasenmäher 1
13 McCulloch 532 43 27-66 Handbuch Rasenmäher 1
14 McCulloch 532 43 25-35 Handbuch Rasenmäher 0
15 McCulloch 532 43 30-30 Handbuch Rasenmäher 0
16 2Wire 7-1/4 Inch Circular Saw 94245 Handbuch Rasenmäher 3
17 Agilent Technologies E4371A Handbuch Rasenmäher 0
18 Agilent Technologies E4370A Handbuch Rasenmäher 3
19 Agilent Technologies E4374A Handbuch Rasenmäher 1
20 Adams 22 Handbuch Rasenmäher 1