Inhaltszusammenfassung zur Seite Nr. 1
I N S T A L L A T I O N
I N S T A L L A T I O N
A N D
A N D
O P E R A T I O N
O P E R A T I O N
M A N U A L
M A N U A L
Address: 3066 Beta Ave.
Burnaby, B.C.
V5G 4K4
Phone: 604.294.4465
Fax: 604.294.4471
e-mail: support@cypress.bc.ca
Model:
CTM-130 /
CTM-132
Revision 1.2
Inhaltszusammenfassung zur Seite Nr. 2
Contents 1 Safety & regulatory notices .................................................................................................................... 4 1.1 Operation in hazardous environments ....................................................................................... 4 1.2 Operation in or around aircraft .................................................................................................. 4 1.3 Regulatory restrictions ................................
Inhaltszusammenfassung zur Seite Nr. 3
9.4 Making a CDMA Network Connection ...................................................................................... 29 9.4.1 Accessing the Embedded Web Pages ................................................................................ 30 9.5 Vehicle Dispatch Operation ...................................................................................................... 31 9.6 AVL Operation ........................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
1 Safety & regulatory notices Due to the nature of wireless communication the reception of data can never be guaranteed. Data may be delayed, corrupted or never received. Although such conditions are rare with well-constructed and configured wireless networks when used in conjunction with devices such as the CTM-130/132 wireless data modem, such systems should not be used in situations where the reception of data is critical to personal safety or property integrity. Cypress Solutions In
Inhaltszusammenfassung zur Seite Nr. 5
1.4 Electromagnetic Interference (EMI) – United States FCC Information This equipment has been tested and found to comply with limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference t
Inhaltszusammenfassung zur Seite Nr. 6
2 Trademarks All brand or product names, trademarks, logos, etc. used in this manual are owned by their respective companies. © 2005 Cypress Solutions Inc. 3 CDMA Overview The first CDMA networks (now called CDMAone) were commercially launched in 1995, and provided roughly 10 times more capacity than analog networks - far more than TDMA or GSM. Since then, CDMA has become the fastest-growing of all wireless technologies. In addition to supporting more traffic, CDMA brings many othe
Inhaltszusammenfassung zur Seite Nr. 7
4 GPS Overview The Global Positioning System (GPS) is a worldwide radio-navigation system operated by the US Department of Defence (DoD) and formed from a constellation of 24 satellites orbiting at an altitude of 10,900 nautical miles and with an orbital period of 12 hours. GPS uses these satellites as reference points to calculate positions accurate to a matter of metres. This is achieved by measuring the time it takes for a radio signal to travel from each satellite to the receive
Inhaltszusammenfassung zur Seite Nr. 8
In general, all the above error sources combined may result in a position error of only a few metres overall. 5 CTM-130/132 Product 5.1 CTM-130 Product CTM-130 Modem The CTM-130 modem is a CDMA 1x wireless data modem with advanced features including auto connect, UDP/TCP PAD, and user I/O. The modem is pre-configured for a specific wireless carrier’s network and cannot be activated on another network except through a roaming agreement. The labels on the modem top provide the
Inhaltszusammenfassung zur Seite Nr. 9
Power cable A standard 4m (12’) length Cable is provided with the modem. Different lengths are available – contact your dealer or Cypress Solutions Inc. 5.3 CTM-130/132 Accessories Serial data cable A serial data cable is required to connect the modem to your computer or other host device. A standard DB9 male (modem end) to DB9 Female (PC end), of length 2m (6’) is available - contact your dealer or Cypress Solutions Inc. Cell Antenna A dual band (800MHz and 1900MHz bands
Inhaltszusammenfassung zur Seite Nr. 10
CD-ROM This contains the Windows® driver for the modem along with this installation and operation manual, and additional technical information. Check the Cypress Solutions web site for updates to the manual and for application notes applicable to the CTM-130/132 modem. www.cypress.bc.ca 6 Windows Installation 6.1 Installing the Windows .inf file For installations where the CTM-130/132 is to be operated with computers running a Windows® operating system it is necessary to install
Inhaltszusammenfassung zur Seite Nr. 11
Browse to the CD and select mdmcs130.inf - Open this file. Click OK, then click on Next. Select Selected Ports and highlight the communications port on the computer that the modem is attached to. Click on Next. The Digital Signature Not Found dialogue box will then appear warning you that you are about to install a driver that does not contain a Microsoft digital signature. Click on Continue Anyway if you wish to continue. Click on Finish. Close the Phone and Modem Options wi
Inhaltszusammenfassung zur Seite Nr. 12
7 Physical Installation 7.1 Mounting the CTM-130/132 The CTM-130/132 is provided with a thermo-plastic elastomer (TPE) base that has eight 5mm mounting holes suitable for #10 screws. These may be used to screw or bolt the device to a suitable surface – take care not to over-tighten these screws and damage the elastomer base. Once this has been installed in the required location it is simply a matter of inserting the modem into its base. If the installation location is subject to shock
Inhaltszusammenfassung zur Seite Nr. 13
Installing the modem in its base. 7.2 Connecting the power cable The power cable has three wires: Red +V supply (+9 to +36VDC) Black 0V return White Standby (+V for operation, 0V or floating for standby) A 5Amp “slow-blow” fuse is recommended in the +V supply line. © 2007 Cypress Solutions Installation and Operation Manual: CTM-130 / CTM-132 (Revision 1.2) Page - 13 -
Inhaltszusammenfassung zur Seite Nr. 14
The operate/standby switch may, for example, be the accessory position on a vehicle ignition switch. In order to minimize the acquisition time of the GPS module in the CTM-132 at power on it is recommended to keep the +V supply connected as per the above diagram – this will provide the “keep- alive” power required by the GPS module to maintain its internal almanac. Refer to the operation notes for details of operation/shutdown modes. 7.3 Connecting the serial data cable The modem serial
Inhaltszusammenfassung zur Seite Nr. 15
7.5 Mounting and attaching the GPS antenna The GPS antenna used with the CTM-132 must be an active type with gain of at least 26dB and compatible with a 3.3 volt dc supply provided directly by the modem over the coax cable. The antenna installation should typically be on an upper horizontal surface of a vehicle with a clear 360 degree view of the sky. The GPS antenna connector is a standard MCX type that requires the GPS antenna cable to use a MCX plug connector. The CTM-132 can be pro
Inhaltszusammenfassung zur Seite Nr. 16
Note that the DGND connection is referenced to the modem’s supply ground. For analog voltage monitoring the measurement range is 0 to +10 volts with 10mV resolution. The input can withstand up to 36 volts. Connections can be made as shown: Note that the AGND connection is referenced to the modem’s supply ground. © 2007 Cypress Solutions Installation and Operation Manual: CTM-130 / CTM-132 (Revision 1.2) Page - 16 -
Inhaltszusammenfassung zur Seite Nr. 17
8 Modem Configuration The Chameleon CTM-130 and CTM-132 modems can be configured for use by using either the modem’s unique embedded web server or by using its extensive AT command set. The majority of modem configuration requirements can be done using the embedded web pages. For more advanced configurations the AT commands will be required. A new modem needs to be activated on the wireless network that it has been provisioned for - once this has been done the modem is ready to be conf
Inhaltszusammenfassung zur Seite Nr. 18
Select I Connect through a phone line and a Modem, and click Next. Select the Cypress Solutions CTM130 CDMA modem. Click Next. Enter *555 as the telephone number to dial. Deselect Use area code and dialing rules, then click Next. No User Name or Password is required for this connection. Click Next, then click Yes. Use CTM130 Configure as the connection name, and click Next. Select No to setting up an internet mail account. Click Next, then Finish. This will now have added a n
Inhaltszusammenfassung zur Seite Nr. 19
The default password is Chameleon. If the incorrect password is entered it will still be possible to view the web pages but no configuration changes will be possible - you will be advised to re-enter your password. Click the Logout button to return to this password entry page at any time. 8.1.3 Activating the Modem If the modem has not been activated on the CDMA network this needs to be done first. On the Activate page enter the 6 digit Client Subsidy Lock code (CSL) and the modems
Inhaltszusammenfassung zur Seite Nr. 20
8.1.4 Configuring the Network Connection Next it is necessary to load the CDMA network connection information into the modem. This is done from the Network page: Enter the user name and password provided by the CDMA network carrier for this specific modem. For a CDMA 1x connection the User Name is often of the form “number@1x.telusmobility.com” (where number is the telephone number allocated to this modem), and the Password is often the Electronic Serial Number (ESN) of this m
