Inhaltszusammenfassung zur Seite Nr. 1
ADSL2+ Modem/Router
Model-nr. NRM42
User’s Manual
English version
Inhaltszusammenfassung zur Seite Nr. 2
INDEX Chapter 1....................................................................................................................................1 1.1 Introducing the ADSL2+ Router...............................................1 1.2 Features of the ADSL2+ Router..............................................3 Chapter 2.................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Chapter 1 Introduction the ADSL2+ Router 1.1 Introducing the ADSL2+ Router Welcome to the ADSL2+ Router. Your router is an “all-in-one” unit, combining an ADSL modem, ADSL router and Ethernet network switch, providing everything you need to get the machines on your network connected to the Internet over your ADSL broadband connection. The router complies with ADSL2+ standards for worldwide deployment and supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It i
Inhaltszusammenfassung zur Seite Nr. 4
the services that outside users can access. For example, to ensure that games and other Internet applications will run properly, user can open some specific ports for outside users to access internal services in network. DHCP services (Dynamic Host Control Protocol), client and server, allow multiple users to get their IP addresses automatically on boot up from the product. Simply set local machines as a DHCP client to accept a dynamically assigned IP address from DHCP server and reboo
Inhaltszusammenfassung zur Seite Nr. 5
1.2 Features of the ADSL2+ Router ADSL Multi-Mode Standard supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It also supports rate management that allows ADSL subscribers to select an Internet access speed suiting their needs and budgets. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2)), G.hs (G994.1), G.dmt.bis (G.992.3), G.dmt.bisplus (G.992.5)). The Annex A and B are supported in different H/W platforms.
Inhaltszusammenfassung zur Seite Nr. 6
(ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Net2phone, Ping, NetMeeting, IP phone and others. Firewall Supports simple firewall with NAT technology and provides option for blocking access from Internet, like Telnet, FTP, TFTP, WEB, SNMP and IGMP. Domain Name System (DNS) relay Provides an easy way to map the domain name (a friendly name for users such as www.yahoo.com) and IP address. When a local machine sets its DNS server with this router’s IP addr
Inhaltszusammenfassung zur Seite Nr. 7
client IP addresses and distribute them including IP address, subnet mask as well as DNS IP address to local computers. It provides an easy way to manage the local IP network. RIP1/2 Routing Supports RIP1/2 routing protocol for routing capability. Simple Network Management Protocol (SNMP) It is an easy way to remotely manage the router via SNMP. Web based GUI Supports web based GUI for configuration and management. It is user-friendly and comes with on-line help. It also supp
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 2 Installing the ADSL2+ Router 2.1 Important note for using the ADSL2+ Router ü Do not use the router in high humidity or high temperatures. ü Do not use the same power source for the router as other equipment. ü Do not open or repair the case yourself. If the router is too hot, turn off the power immediately and have it repaired at a Warning qualified service center. ü Avoid using this product and all accessories outdoors. ü Place the router on
Inhaltszusammenfassung zur Seite Nr. 9
2.3 The Front LEDs ADSL2+ Router with 4-port Switch 802.11g ADSL2+ Router model LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. Lit when successfully connected to an ADSL DSLAM 2 ADSL: (“linesync”). Lit when connected to an Ethernet device. LAN Port 3 Green for 100Mbps; Orange for 10Mbps. 1-4: Blinking when data is Transmitted / Received. WLAN: Lit green when the wireless connection is established. 4 (Wireless Flashes when sending/re
Inhaltszusammenfassung zur Seite Nr. 10
2.4 The Rear Ports ADSL2+ Router with 4-port Switch 4 3 1 2 802.11g ADSL2+ Router model 1 5 3 4 2 Port Meaning PWR 1 Connect the supplied power adapter to this jack. After the device is powered on, press it to reset the device or restore to factory default settings. 2 RESET 0-3 seconds: reset the device 6 seconds above: restore to factory default settings (this is used when you can not login to the router, e.g. forgot the password) Connect a UTP Ethernet cable (
Inhaltszusammenfassung zur Seite Nr. 11
2.5 Cabling One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables. Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analogue modems) have a line filter connected between them and the wall socke
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 3 Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Windows 98/NT/2000/XP/Me, MAC, Linux, etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration PCs must have an Ethernet interface installed properly and connected to the router either directly or through an external repeater hub, PCs must have TCP/IP installed and
Inhaltszusammenfassung zur Seite Nr. 13
Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 11
Inhaltszusammenfassung zur Seite Nr. 14
Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. 12
Inhaltszusammenfassung zur Seite Nr. 15
Configuring PC in Windows 98/Me 1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2.Select TCP/IP ->NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3.Select the Obtain an IP address automatically radio button. 4.Then select the DNS Configuration tab. 5.Select the Disable DNS radio button and click OK to finish the configuration. 13
Inhaltszusammenfassung zur Seite Nr. 16
Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2.Select TCP/IP Protocol and click Properties. 3.Select the Obtain an IP address from a DHCP server radio button and click OK. 14
Inhaltszusammenfassung zur Seite Nr. 17
3.2 Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface: Username: admin Password: password LAN Device IP Settings: IP Address: 192.168.0.1 Subnet Mask: 255.255.255.0 ISP setting in WAN site: PPPoE DHCP server: DHCP server is enabled. Start IP Address: 192.168.0.100 IP pool counts: 100 3.2.1 Username and Password The default username and password are “admin” and “password” respectively. If
Inhaltszusammenfassung zur Seite Nr. 18
3.3 LAN and WAN Port Addresses The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below. LAN Port WAN Port IP address 192.168.0.1 The PPPoE function is enabled to Subnet Mask 255.255.255.0 automatically get the WAN port DHCP server function Enabled configuration from the IP addresses for 100 IP addresses continuing from ISP, but you have to distribution to PCs 192.168.0.100 through set the username and 192.168.0.199 password first.
Inhaltszusammenfassung zur Seite Nr. 19
3.5 Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.0.1, and click “Go”, a user name and password window prompt will appear. The default username and password are “admin” and “password”. Congratulation! You are now successfully logon to the ADSL2+ Router! 17
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 4 Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Quick Start (wizard setup) Interface Setup (Internet, LAN, Wireless) Advanced Setup (Routing, NAT, ADSL) Access Management (ACL, IP Filter, SNMP, UPnP, DDNS) Maintenance (Administration, Time Zone, Firmware, SysRestart, Diagnostics) Status Please see the relevant sections of this manual for detailed instructio
