Inhaltszusammenfassung zur Seite Nr. 1
LBP-800 Laser Printer
Getting Started Guide
IMPORTANT:
Read this manual carefully before using your printer.
Save this manual for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Copyright ©1999 Canon Inc. All Rights Reserved All information in this manual is copyrighted. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without prior written consent from Canon. Notice Canon makes no guarantees of any kind with regard to this
Inhaltszusammenfassung zur Seite Nr. 3
Contents Using Your LBP-800 Documentation ........................................... 4 Using the Online Documentation.............................................. 5 Checking the Package Contents.................................................... 6 Identifying the Parts ...................................................................... 7 Front View................................................................................. 7 Rear View.............................................
Inhaltszusammenfassung zur Seite Nr. 4
Using Your LBP-800 Documentation Congratulations on your purchase of the Canon LBP-800 Laser Printer. Your printer comes with the following documentation: o The LBP-800 Getting Started Guide (This Guide) Describes how to set up the printer and install the printing software (CAPT). Read this manual first before operating your printer. The Getting Started Guide is also available online (PDF). o The LBP-800 User’s Guide (PDF) Describes the printer’s features and its
Inhaltszusammenfassung zur Seite Nr. 5
Using the Online Documentation To read the PDF files, insert the compact disc in your CD-ROM drive. The CD-ROM menu appears automatically. To access the CD-ROM Menu Help, click the CD-ROM Menu Help button. To access the LBP-800 Documentation, click the Canon LBP-800 Manuals button. To read the manual, you must have Adobe Acrobat Reader installed. To install Adobe Acrobat Reader, click the Acrobat Reader Install button, and select the language folder you want to inst
Inhaltszusammenfassung zur Seite Nr. 6
Checking the Package Contents As you unpack the printer, save the carton and packing materials in case you want to move or ship the printer in the future. Input paper support LBP-800 Printer Output paper support Power cord EP-22 cartridge (Example: 120V Model) Documentation CD-ROM disc (Getting Started Guide) 6 Checking the Package Contents
Inhaltszusammenfassung zur Seite Nr. 7
Identifying the Parts Front View Input paper support Face-down output paper support Multi-purpose tray (MP tray) Face-down Paper guides delivery slot Manual feed slot Front cover Face-up delivery slot Paper delivery selector Rear View Parallel port interface connector Power switch Power socket Identifying the Parts 7 English
Inhaltszusammenfassung zur Seite Nr. 8
Selecting the Printer Location When selecting a site for the printer, the location should provide ample space for ventilation and easy servicing of the printer. Use the dimensional diagrams below for space considerations. (Dimensions are in millimeters.) Top view Side view 768 312 100 Carrying the Printer CAUTION: Do not carry the printer by holding the front panel, the face-up delivery slot, or by holding it at the front and rear. This could result in damage to the printer or pers
Inhaltszusammenfassung zur Seite Nr. 9
Installing the EP-22 Cartridge The EP-22 cartridge contains a photosensitive part called the “drum,” which has characteristics similar to photo film. It also contains black carbon powder called “toner.” The drum is extremely sensitive to light and may deteriorate if exposed to light. Poor print quality can result if the toner becomes caked or unevenly distributed inside the cartridge. Follow the instructions below when handling the cartridge. o Do not open the protective bag c
Inhaltszusammenfassung zur Seite Nr. 10
o Do not stand the cartridge on end, or turn it upside down. Toner could become caked in the cartridge resulting in poor print quality. o Keep the cartridge away from a monitor’s cathode ray tube (CRT), disk drives, and floppy disks. The magnet inside the cartridge can destroy the image data in the CRT, or data on the disks. CAUTION: Do not dispose of toner cartridges in fire. Toner powder is flammable. 1. Remove the cartridge from its protective bag. Save the protective bag. You may
Inhaltszusammenfassung zur Seite Nr. 11
3. Place the cartridge on a sturdy surface. Snap the tab at the end of the cartridge backwards and fold it back and forth until it is loose. 4. While holding the cartridge firmly with one hand, pull the sealing tape in the direction indicated in the illustration below. Pull in this direction Pull within this angle The tape may snap if pulled in a direction wider than the indicated angle. 5. Grasp the top of the front cover on both sides, then gently pull until the cover is fully open. I
Inhaltszusammenfassung zur Seite Nr. 12
6. Insert the cartridge into the printer along the guides. Make sure that the cartridge slides all the way inside the printer. Do not touch the drum’s protective shutter. 7. Always close the front cover immediately after inserting a cartridge. Do not leave the front cover open. Exposure to light can damage the cartridge’s drum. 12 Installing the EP-22 Cartridge
Inhaltszusammenfassung zur Seite Nr. 13
Inserting/Removing the Paper Supports Insert the paper supports firmly into the slots at the front and back of the printer. The slots have guides to ensure the correct support is in the correct slot. Slot Guide Supports should curve slightly towards the rear of the printer. Do not insert a support so that it curves towards the front of the printer. To remove the paper supports, lift them out of the slots. Inserting/Removing the Paper Supports 13 English
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the Printer to Your Computer Before connecting the printer to your computer, make sure the power to your computer is turned off. 1. Connect one end of the interface cable to your printer. Secure the cable by snapping the two wire clips on the printer into the cable connector. CAUTION: Before connecting or disconnecting the interface cable, make sure that the printer is turned off and that the power cord is unplugged from the printer. 2. Connect the other end of the inte
Inhaltszusammenfassung zur Seite Nr. 15
Connecting to the Power Supply Before inserting the plug, make sure that the rating indicated on the printer matches the voltage of the AC outlet. 1. Plug the power cord into the power socket. 2. Connect the other end of the power cord to the AC outlet. 3. Turn on the printer by pressing the I mark. Turn off the printer by pressing the O mark. On position Off position If the power does not turn on even when the printer is plugged into an AC outlet, check the following item
Inhaltszusammenfassung zur Seite Nr. 16
Selecting Paper Delivery Use the paper delivery selector to choose face-up or face-down delivery. Face-down Face-up Face-down Delivery Use face-down delivery for plain paper only. Face-up Delivery Use face-up delivery for envelopes and transparencies, as well as other special paper, including non-standard sized plain paper. 16 Selecting Paper Delivery
Inhaltszusammenfassung zur Seite Nr. 17
Loading Paper into the MP Tray The MP (multi-purpose) tray can hold up to approximately 125 sheets of 2 75 g/m paper for high-volume printing. Acceptable paper sizes are Legal, Letter, A4, Executive, and B5. Follow the steps below to load a stack of paper. Make sure that the input paper support is inserted into its slot in the printer. 1. Prepare a stack of paper and tap it on a flat surface to properly align the edges. 2. Align the stack of paper so that the side to be printed on faces the
Inhaltszusammenfassung zur Seite Nr. 18
3. Adjust the paper guides to the width of the stack of paper. For A4-size or Letter/Legal-size paper, align the paper guides with the icons inside the MP tray. Adjust the guides so that there is no space between each paper guide and the edge of the stack of paper. When reloading, be sure to remove the paper remaining in the MP tray. Stack it together with the new sheets before loading. The MP tray is now ready to supply paper. 18 Loading Paper into the MP Tray
Inhaltszusammenfassung zur Seite Nr. 19
Installing the CAPT Before you can print with the LBP-800 printer, you must install the CAPT (Canon Advanced Printing Technology). Windows 95/98 CD-ROM Installation Before you install the software, make sure you do the following: o Connect the printer to your computer. (For details, see page 14.) o Plug in the printer. (For details, see page 15.) o Turn the printer on. (For details, see page 15.) o Start Windows 95 or 98. Click Cancel if the New Hardware Found (Add New Hardware Wizard) dialog
Inhaltszusammenfassung zur Seite Nr. 20
2. Click the Canon LBP-800 Install button. The Canon LBP-800 Install dialog appears. Click Yes to install the CAPT in the language displayed. The Welcome screen appears. 20 Installing the CAPT
