Inhaltszusammenfassung zur Seite Nr. 1
Multimedia Receiver
VM9312HD
Installation and Operation Manual
SAT
READY
PRESS AUDIO VM9312HD
Watts Peak
40W x 4
160
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
VM9312HD CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9312HD Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation ..................................
Inhaltszusammenfassung zur Seite Nr. 4
VM9312HD ii
Inhaltszusammenfassung zur Seite Nr. 5
VM9312HD PREPARATION Congratulations on your purchase of the Jensen VM9312HD • MediaLink1 includes the following connectivity: Mobile Multimedia Receiver. • jLinkDirect 8-pin DIN for iPod WARNING! Only connect the unit to a12-volt power supply with proper grounding. • 3.5mm audio only Input It’s a good idea to read all of the instructions before beginning • RCA Audio / Video Input the installation. We recommend having your Jensen VM9312HD installed by a reputable installation shop. Chassis W
Inhaltszusammenfassung zur Seite Nr. 6
BAND AS/PS DISP OPEN PRESS AUDIO LO/DX VM9312 EJECT SRC MUTE VM9312HD INSTALLATION b. Install half-sleeve into adapter or dashboard (use What’s in the Box Tools and Supplies only the supplied screws). Do not force the sleeve 1. Cosmetic trim ring You will need these tools and supplies to install your into the opening or cause it to bend or bow. 2. Wiring harness power/speaker VM9312HD: c. Locate the series of bend-tabs along the top, 3. Mounting hardware for VM9312HD • Torx type, flat-head a
Inhaltszusammenfassung zur Seite Nr. 7
BAND AS/PS DISP OPEN P ESS AUD O /DX SRC MUTE R I VM9312 EJECT LO BAND AS/PS DISP OPEN PRESS AUDIO VM9312 EJECT LO/DX SRC MUTE VM9312HD Final Installation Final ISO-DIN Installation After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not FINAL INSTALLATION operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and 4 5 proceed with final mounting of the chassi
Inhaltszusammenfassung zur Seite Nr. 8
VM9312HD WIRING DIAGRAM MediaLink See the Module Connections diagram for more information about Bus * connecting a satellite receiver and an iPod (through the MediaLink). SAT Radio WHITE * Satellite BLUE Receiver SAT L Connections SUB.W External Power Amplifier RED RED SAT R FRONT R WHITE YELLOW FRONT L RED WHITE REAR R WHITE RED REAR L *MediaLink YELLOW External AV System WHITE RED (Requires PAC SWI-PS Interface Adapter, Sold Separately) SWC HD RADIO Connect to HD Module YELLOW Rear Video 1 (Se
Inhaltszusammenfassung zur Seite Nr. 9
HD MODULE VM9312HD MODULE CONNECTIONS Compatible SAT Tuners: 1. XMD1000 (requires XMC or XMDJEN100 Cable Kit) 2. CNP2000UC 3. SC-C1 and SIRJEN2 *** Requires Gen 5.5 or earlier photo or video iPod. iPod Touch, iPod Classic and iPod Nano with video will only play music files. *** 5
Inhaltszusammenfassung zur Seite Nr. 10
VM9312HD CONTROLS AND INDICATORS Button Operation 4 3 2 1 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close BAND AS DISP OPEN the TFT. 2. WIDE/DISP Press to adjust the display aspect of the picture to one of two settings: Full or Normal. TILT PICTURE WIDE CLOSE With the monitor closed, press the DISP button to cycle through information available on the LCD screen. When the NAV101 is connected to the VM9312HD, press
Inhaltszusammenfassung zur Seite Nr. 11
VM9312HD CONTROLS AND INDICATORS 9. IR Remote Control Receiver 4 3 2 1 10. ( ) DVD Mode: Press once to play back the previous chapter/ track. TUNER Mode: Press once to auto-search for the previous BAND AS DISP OPEN available radio station. MENU Mode: Press once to move the cursor to the left. 11. ( ) TILT PICTURE WIDE CLOSE DVD Mode: Press once for slow forward/slow reverse. TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down. 12. RESET Press to rese
Inhaltszusammenfassung zur Seite Nr. 12
VM9312HD REMOTE CONTROL 8 3 35 4 1 5 2 9 MUSIC PHOTOS VIDEO iPod 10 6 DISP 13 7 26 28 WIDE 25 27 11 15 TILT 12 16 14 PRESET 34 20 33 MENU 18 19 32 17 22 23 21 24 SLOW SETUP 31 CLEAR 29 30 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only. 8
Inhaltszusammenfassung zur Seite Nr. 13
VM9312HD Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod MENU 1 Enters the main menu of the Turns on/off PBC when play- Displays diagnostics screen Selects Photo mode disc ing VCD TITLE 2 Enters the title menu of the Plays first ten seconds of Selects Music mode disc each chapter/title MUTE 3 Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off audio output Toggles on/off aud
Inhaltszusammenfassung zur Seite Nr. 14
VM9312HD Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3 SATELLITE iPod OPEN/ 25 Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT moni- Opens/closes the TFT monitor Opens/Closes the TFT monitor CLOSE tor tor tor tor 26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle 27 Increases monitor
Inhaltszusammenfassung zur Seite Nr. 15
VM9312HD USING THE TFT MONITOR Open/Close TFT Monitor Aspect Ratio Parking Brake Inhibit Open TFT Monitor Press the DISP button (28) on the remote control or DISP/ When the pink "Parking" wire is connected to the vehicle WIDE button (2) on the monitor to adjust the aspect ratio as Press the OPEN button (1) on the front panel or press the Parking Brake circuit, the front TFT monitor will display video follows: ( ) button (25) on the remote control to activate the when the Parking Brake is eng
Inhaltszusammenfassung zur Seite Nr. 16
VM9312HD OPERATING INSTRUCTIONS SWC Functions 2. Touch the screen or press the joystick button (13) to Power On / Off select the highlighted option. The following controls are available for most vehicles: Press the /SRC button (6) on the unit (or the button (4) 3. Touch the +/– buttons on the screen, press the |<<, >>|, 1. Vol Up on the remote control) to turn the unit on. The buttons on the >>, or << buttons (17, 19, 14, 22) on the remote control, 2. Vol Down front of the unit light up an
Inhaltszusammenfassung zur Seite Nr. 17
VM9312HD SETUP MENU To access system settings, press the SETUP button (31) on the unit. A submenu appears in a second row with the Setting Options Function selected option highlighted in blue. the remote control or touch the button on the screen to 3. Select a new value by using the touchscreen or pressing OSD English On Screen Display appears in enter the “SETUP” menu. The “GENERAL” sub-menu English. the >> or << buttons (14, 22) on the remote control or appears highlighted in blue. the
Inhaltszusammenfassung zur Seite Nr. 18
VM9312HD Rating Sub-menu Features Hardware Sub-menu Features TS Cal (Screen Calibration) The DVD system has a built-in parental lock feature to If the rear-view video camera is connected, the unit is on, and To access the “Screen Calibration” function from the SETUP prevent unauthorized persons from viewing restricted disc the TFT monitor is retracted inside the unit, the TFT monitor menu, select the “TS CAL” option. content. By default, the rating system is unlocked. Once automatically mov
Inhaltszusammenfassung zur Seite Nr. 19
VM9312HD TUNER OPERATION 5. Tuning mode indicator About HD Radio™ Technology 6. Preset radio stations: Touch to recall preset stations NOTE: The BAND button on the unit only works when the HD Radio technology allows CD-quality digital broadcasting TFT is closed. 7. Program Information:Titlle, Artist, Type of your local AM and FM radio stations. HD Radio broadcasts NOTE: The amount of information displayed when can include multiple channels on the same frequency, which receiving an HD Radio
Inhaltszusammenfassung zur Seite Nr. 20
VM9312HD Direct Tuning 2. Touch the on-screen MEM button (18) to open the NOTE: The amount of information displayed when preset screen. To enter a radio station directly, touch the button or receiving an HD Radio signal is dependent upon what is press the GOTO button (21) on the remote control to display being broadcast. Some stations broadcast their call the direct entry menu. letters (name), the artist's name, song title, and category Preset: _ _ of music. 1 2 3 FM:___._MHz PTY Search E
