Inhaltszusammenfassung zur Seite Nr. 1
Grass Collection System
OWNER’S MANUAL AND PARTS LIST
For use on the Wright Z
98320007 48” 2-BAG COLLECTION SYSTEM
98320008 52” 2-BAG COLLECTION SYSTEM
98320009 52” 3-BAG COLLECTION SYSTEM
98320010 61” 3-BAG COLLECTION SYSTEM
Note: Please read all safety instructions before operating your
Grass Collection System. This manual also contains installation
instructions and a replacement parts list for your
Inhaltszusammenfassung zur Seite Nr. 2
Welcome to the progressive group of mowing professionals who use Wright commercial products. We are focused on giving you advanced engineering and quality construction in each mower we build. This manual explains the features and promotes safer use of the mower. Please read it in its entirety and follow the instructions carefully so that you can have many years of safe and productive operation with your Wright product. For service, remember that your Wright dealer knows your mower best
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS Safety Instructions General Safety Removing An Obstruction Mower Stability Safety Decals Installation Instructions Before You Begin Deck Preparation and Pulley Installation Blower Installation Deck Cover Installation Rear Collection System Installation Transfer Tube Installation Optional Deck Counterweight Operation Instructions Specifications Illustrated Parts List
Inhaltszusammenfassung zur Seite Nr. 4
This is the safety alert symbol. It is used throughout this manual and on the owner’s safety labels to alert you to potential personal injury hazards. Read these instructions carefully. It is essential that you read the instructions and safety precautions before you attempt to work on or use this unit. Obey all safety messages that follow to avoid possible destruction of property, injury or death . General Safety Removing an Obstruction • Become familiar with the Wright Z and it’s 1 Tu
Inhaltszusammenfassung zur Seite Nr. 5
Safety Decals It is essential that you become familiar with the safety decals on your grass collection system. The safety decals will alert you of potential haz- ards with operating the equipment. Following these cautions will help create a safe operation and prolong the life of your equipment. The fol- lowing decals are located on your equipment. Replacement decals are not available through Located on blower, Always use caution with Wright mfg. movable parts. Serious injury can resu
Inhaltszusammenfassung zur Seite Nr. 6
Before You Begin... Tools You Will Need 7/16” Wrench 1/2” Wrench 9/16 Wrench 3/4” Wrench 7/8” Wrench 13/16” Wrench Rubber Mallet Jack and two block supports Abrasive Paper Drill Safety First Use appropriate safety precautions. Warning: Rotating parts can cause serious injury. Wear eye protection and appropriate footware. Disconnect Spark Plug wires on equipment before you begin to work. Do not test blower unit until firmly attached to mower and all safety guards are in pl
Inhaltszusammenfassung zur Seite Nr. 7
• Using a rubber mallet, gently hammer the pulley assembly onto the spindle shaft. It is necessary to maximize the engagement of the pulley and the spindle shaft. • Tighten the hub bolts with a 7/16” wrench. Alternate bolts when tightening to maintain a balanced load on each bolt. Blower Installation 1. Mounting the Blower to the Deck Lift the blower and insert the front tab of the bracket into the mating hole on the deck-top bracket. The rear tab on the Adapter Bracket sh
Inhaltszusammenfassung zur Seite Nr. 8
Install New Deck Cover For 48” Mower Deck 1. Place offset stud adapter on existing deck cover stud. 2. Secure in place with the supplied 3/8” flange nut. Do not tighten completely. 3. Place deck cover on mower deck and verify the correct stud location. Remove Cover and tighten nut. 4. Place another 3/8” nut on the stud adapter and adjust location to properly support deck cover when installed. 5. Place new deck cover on mower deck and tighten deck knob. For 52”
Inhaltszusammenfassung zur Seite Nr. 9
Rear Collection System Installation 1. Attach Muffler Tail Pipe and Clamp • The tail pipe must be installed to direct the exhaust away from the bags on the rear collection system. Slide end onto existing muffler exhaust pipe. Orient the tail pipe so that it directs the exhaust to the right side of the mower. This will prevent excess heat exposure to the grass collection bags. • Use enclosed screw to secure the tail pipe to the muffler. 2. Bolt on Grass Collection Receptacle F
Inhaltszusammenfassung zur Seite Nr. 10
4. Mount Collection Hood Frame to Mower Frame and Assemble • For 52” Triple Bag Units: It is necessary to use the offset adapter for mounting. This improves the access of the trim edge on the left side of the mower. Attach using 4 3/8” bolts and nuts on each adapter bracket. Use the attached pins to secure the rear assembly to the mower. For all other units: Mount to tube slots located on the upper rail of the rear face of the hood frame. Use the attached pins to secure the rear
Inhaltszusammenfassung zur Seite Nr. 11
Before You Begin… • Clear lawn of all debris, including exposed rocks, fallen limbs and sticks. • Clean underside of deck and grass collection system to make sure it is free from clogs, grass buildup, or any other obstructions. • Check moisture content of grass before mowing: if the grass is wet, it will likely clog easily. Additionally, collecting long cuts of grass can also clog easily. For this reason it is best to cut frequently or in stages when needed • Ensure that the transfer
Inhaltszusammenfassung zur Seite Nr. 12
48” Twin 52” Twin 52” Triple 61” Triple Receptacle Receptacle Receptacle Receptacle Deck Size (in.) 48” 52” 52” 61” Number of Bags 2 2 3 3 Polyester Polyester Polyester Polyester w/ w/ w/ w/ Bag Material Polyethylen Polyethylen Polyethylen Polyethylen e bottom e bottom e bottom e bottom Bag Size (WxWxH) (in.) 18”x18”x24” 18”x18”x24” 18”x18”x24” 18”x18”x24” Total Capacity (Bushels) 8 8 12 12 Rear weight empty (lbs.) 108 108 140 140 Rear weight full
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
GRASS COLLECTION SYSTEM PARTS LIST REF # PART NUMBER DESCRIPTION 1 SEE BELOW BLOWER ASSEMBLY 2 51410024 TAIL PIPE 4 98330002 BLOWER MOUNT 5 98320033 BOLT, FLANGE 3/8"-16 X 3/4 Z5 6 98320026 NUT, LOCK FLANGE 3/8"-16 9 98330003 GRASS COLLECTION RECEPTACLE FRAME 10 93460095 RECPTACLE FRAME SIDE SUPPORT, RIGHT 11 93460096 RECPTACLE FRAME SIDE SUPPORT, LEFT 12 98320023 BOLT, FLANGE 1//2"-13 X 1 1/4" Z5 13 12990022 NUT, LOCK FLANGE 1/2"-13 Z 14 98320046 THICK WASHER, 1/" ID 15 98320024 BOLT, FLANGE 5
Inhaltszusammenfassung zur Seite Nr. 15
Inhaltszusammenfassung zur Seite Nr. 16
BLOWER PARTS LIST REF # PART NUMBER DESCRIPTION QTY. 1 98320071 BLOWER HOUSING 1 2 13990010 FLAT WASHER–5/16” 16 3 98320026 HEX NUT, NYLON INSERT–3/8"-16 12 4 98320084 IDLER PULLEY 1 5 98320042 CAP SCREW–3/8"-16 X 2" LONG 4 6 98320036 CAP SCREW–3/8"-16 X 1 1/2" LONG G5 8 798320043 SPRING 1 HEX NUT, NYLON INSERT–5/16"-18 4 8 12990021 9 98320073 BELT TENSIONING ASSEMBLY 1 10 13990009 FLAT WASHER 1/4" USS 5 11 98320074 BELT TENSIONING BUSHING 1 BELT GUIDE, LARGE PULLEY 1 12 98320069 13 9832007
Inhaltszusammenfassung zur Seite Nr. 17
Inhaltszusammenfassung zur Seite Nr. 18
2-BAG CATCHER PARTS LIST REF # PART NUMBER DESCRIPTION QTY. 1 98320062 2-BAG SUPPORT MOUNT 1 2 98320063 2-BAG CAP FRAME SUPPORT 1 3 98320055 7" INLET TUBE 2-BAG 1 4 98320030 1/2" Flat Washer 2 5 98320044 CS 1/2-13 X 3 G5 1 6 98320034 CS 1/2-13 X 2.5 G5 2 7 12990022 1/2-13 Nylon Insert Nut 3 8 13990010 5/16" Flat Washer 12 9 98320024 CAP SCREW 5/16-18 x .75 8 10 12990021 5/16-18 Nylon Insert Nut 14 11 98320020 1.5" HOLE PLUG, PLASTIC 2 12 98320053 HANDLE, BAG 2 13 98320023 RUBBER BUMPER 2 14 9832
Inhaltszusammenfassung zur Seite Nr. 19
2-BAG CATCHER 20 19 29 28 18 24 5 4 11 4 15 6 2 10 8 16 18 10 19 14 20 13 8 17 10 9 23 27 22 9 25 12 7 6 1 26 3 17 33 21 32 10 1 31 8 30
Inhaltszusammenfassung zur Seite Nr. 20
3-BAG CATCHER PARTS LIST REF. # PART NUMBER DESCRIPTION QTY. 1 98320058 3-BAG SUPPORT MOUNT 1 2 3-BAG CAP SUPPORT 1 3 98320060 AIR DOME FRAME (3-BAG) 1 4 98320015 CATCHER BAG, COMMERICAL 3 5 98320059 CLAMP BRACKET, 2-3 BAG CATCHER 4 6 98320057 Gas Cylinder Mount 2 7 98320053 HANDLE, BAG 2 8 98320064 3 -BAG DEFLECTOR 1 9 98320020 1.5" HOLE PLUG, PLASTIC 2 10 98320027 1/2 DETENT PIN 2.5" LONG 3 11 98320081 GAS SPRING BALL JOINT 4 12 12990021 5/16-18 Nylon Insert Nut 16 13 13990009 1/4" USS WASHER
