Inhaltszusammenfassung zur Seite Nr. 1
Version
01.00
April
2005
Vector Signal Generator ¸SMATE200A
Configuration Guide
Inhaltszusammenfassung zur Seite Nr. 2
The variety of signal generation for production This document guides you step-by-step through the configuration procedure for the Vector Signal Generator R&S SMATE200A. Each step indicates whether an option is mandatory or optional and also provides the following information: Option Name of the option Description Description of the option Requires Options required in order to install the selected option Not compatible with Options incompatible with the selected option HW or SW Identifie
Inhaltszusammenfassung zur Seite Nr. 3
Option overview Base Unit SMATE200A SMATE-K SMATE-B 1400.7005.02 Software Hardware Vector Signal Option Option Generator RF path A SMATE-B103 SMATE-B106 1401.1000.02 1401.1200.02 100 kHz to 3 GHz 100 kHz to 6 GHz 1st RF Path 1st RF Path RF path B SMATE-B22 SMATE-B31 1401.2507.02 1401.1800.02 SMATE-B203 SMATE-B206 1401.1600.02 1401.1400.02 FM/PhiM Modulator High Power Output 100 kHz to 3 GHz 100 kHz to 6 GHz and Low Phase Noise 1st RF Path 2nd RF Path 2nd RF Path SMATE-B13 Baseband 1401.2907.02
Inhaltszusammenfassung zur Seite Nr. 4
Single-path instrument Applies if the instrument is equipped with one RF path and no more than one baseband path. Step Configure RF path MANDATORY Choose frequency range (only one choice possible) MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATEB103 100 kHz to 3 GHz SMATE200A SMATEB106 HW Factory-installed SMATEB106 100 kHz to 6 GHz SMATE200A SMATEB103 HW Factory-installed Choose output configuration OPTIONAL Option Description Requires Not compatibl
Inhaltszusammenfassung zur Seite Nr. 5
1 OPTIONAL Choose digital modulation systems with R&S WinIQSIM ™ Option Description Requires Not compatible with HW or SW Remarks SMATE-K11 Dig. Std. IS-95 SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K12 Dig. Std. cdma2000 SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K13 Dig. Std. 3GPP TDD SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K14 Dig. Std. TD-SCDMA SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K15 User-Defined OFDM Signals SMATE-B10 or B11 - SW With WinIQSIM ™ and WinIQOFDM SMA
Inhaltszusammenfassung zur Seite Nr. 6
Two-path instrument Applies if the instrument is equipped with up to two RF paths and up to two baseband paths. Step Configure RF path A MANDATORY Choose frequency range (only one choice possible) MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATEB103 100 kHz to 3 GHz SMATE200A SMATEB106 HW Factory-installed SMATEB106 100 kHz to 6 GHz SMATE200A SMATEB103 HW Factory-installed Choose output configuration OPTIONAL Option Description Requires Not compatibl
Inhaltszusammenfassung zur Seite Nr. 7
Step Configure baseband path A OPTIONAL Choose baseband source MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATE-B13 Baseband Main Module SMATEB10x - HW Factory-installed. Requires SMATE-B10, SMATE- B11 or SMATE-K62. SMATE-B10 Baseband Generator with SMATE-B13 SMATE-B11 HW Factory-installed ARB and Digital Modulation (in baseband path A) (in baseband path A) SMATE-B11 Baseband Generator with SMATE-B13 SMATE-B10 HW Factory-installed ARB (16 MSamples) an
Inhaltszusammenfassung zur Seite Nr. 8
Choose noise OPTIONAL Option Description Requires Not compatible with HW or SW Remarks SMATE-K62 Additive White Gaussian SMATE-B13 - SW Noise (AWGN) Step Configure baseband path B OPTIONAL Choose baseband source MANDATORY Option Description Requires Not compatible with HW or SW Remarks SMATE-B13 Baseband Main Module SMATE-B13 - HW Factory-installed. Requires SMATE-B10, SMATE- (in baseband path A) B11 (in baseband path A or B) or SMATE-K62. SMATE-B10 Baseband Generator
Inhaltszusammenfassung zur Seite Nr. 9
1 OPTIONAL Choose digital modulation systems with R&S WinIQSIM ™ Option Description Requires Not compatible with HW or SW Remarks SMATE-K11 Dig. Std. IS-95 SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K12 Dig. Std. CDMA2000 SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K13 Dig. Std. 3GPP TDD SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K14 Dig. Std. TD-SCDMA SMATE-B10 or B11 - SW With WinIQSIM ™ SMATE-K15 User-Defined OFDM Signals SMATE-B10 or B11 - SW With WinIQSIM ™ and WinIQOFDM SMATE
Inhaltszusammenfassung zur Seite Nr. 10
Configuration Examples The modular design of the R&S SMATE200A allows the instrument to be equipped with up to two paths. This allows a multitude of applications to be performed for which several signal generators were previously required. One baseband generator and one RF path One baseband generator and two RF paths SMATEB10x SMATE-B10 SMATE-B13 SMATE-B10 SMATE-B13 SMATEB10x SMATE-B13 SMATEB20x Instrument configuration Instrument configuration Option Installed Description Op
Inhaltszusammenfassung zur Seite Nr. 11
One baseband generator and two RF paths Two baseband generators and two RF paths SMATEB10x SMATE-B10 SMATE-B13 SMATE-B10 SMATE-B13 SMATEB10x SMATE-B10 SMATE-B13 SMATEB20x SMATEB20x Instrument configuration Instrument configuration Option Installed Description Option Installed Description SMATE200A 1x Base unit SMATE200A 1x Base unit SMATEB10x 1x Frequency option 1st RF path SMATEB10x 1x Frequency option 1st RF path SMATEB20x 1x Frequency option 2nd RF path SMATEB20x 1x
Inhaltszusammenfassung zur Seite Nr. 12
Ordering information 1 Vector Signal Generator R&S SMATE200A 1400.7005.02 including power cable, Quick Start Guide and CD-ROM (with operating and service manual) Options RF path A 100 kHz to 3 GHz R&S SMATEB103 1401.1000.02 100 kHz to 6 GHz R&S SMATEB106 1401.1200.02 Low Phase Noise and analog modulation FM / PhiM R&S SMATE-B22 1401.2507.02 High-Power Output R&S SMATE-B31 1401.1800.02 RF path B 100 kHz to 3 GHz R&S SMATEB203 1401.1400.02 100 kHz to 6 GHz R&S SMA
Inhaltszusammenfassung zur Seite Nr. 13
2 Digital modulation systems using R&S WinIQSIM ™ R&S SMATE-K11 1404.5907.02 Digital Standard IS-95 (with R&S WinIQSIM ™) R&S SMATE-K12 1404.6003.02 Digital Standard CDMA2000 (with R&S WinIQSIM ™) R&S SMATE-K13 1404.6090.02 Digital Standard 3GPP TDD (with R&S WinIQSIM ™) R&S SMATE-K14 1404.6203.02 Digital Standard TD-SCDMA (with R&S WinIQSIM ™) R&S SMATE-K15 1404.6303.02 User-Defined OFDM Signals (with R&S WinIQSIM ™ and R&S WinIQOFDM) Digital Standard 1xEV-DO (with R&S Win
Inhaltszusammenfassung zur Seite Nr. 14
www.rohde-schwarz.com Europe: Tel. +49 1805 12 4242, e-mail: customersupport@rohde-schwarz.com · North America: Tel. +1 410-910-7988, e-mail: customer.support@rsa.rohde-schwarz.com Asia: Tel. +65 68463710, e-mail: customer-service@rssg.rohde-schwarz.com ® R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG · Trade names are trademarks of the owners ® R&S SMATE200A ⋅ Version 01.00 ⋅ April 2005 ⋅ Data with