Inhaltszusammenfassung zur Seite Nr. 1
HP Designjet L65500 Printer
Maintenance and troubleshooting guide (second edition)
Inhaltszusammenfassung zur Seite Nr. 2
Legal notices Trademarks © 2009 Hewlett-Packard Development Microsoft® and Windows® are U.S. Company, L.P. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP Products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or om
Inhaltszusammenfassung zur Seite Nr. 3
Table of contents 1 Safety precautions General safety guidelines ..................................................................................................................... 1 Warnings and cautions ......................................................................................................................... 2 Warning labels ...................................................................................................................................... 2 Emergency stop b
Inhaltszusammenfassung zur Seite Nr. 4
Replace the printhead cleaning roll and aerosol filters ....................................................................... 24 Move the printer ................................................................................................................................. 27 Printer maintenance kits ..................................................................................................................... 28 Cleaning kit ............................................................
Inhaltszusammenfassung zur Seite Nr. 5
10 Front-panel error messages 11 When you need help Documentation ................................................................................................................................... 48 HP Proactive Support ......................................................................................................................... 48 HP Customer Care ............................................................................................................................. 48 Servi
Inhaltszusammenfassung zur Seite Nr. 6
vi ENWW
Inhaltszusammenfassung zur Seite Nr. 7
1 Safety precautions General safety guidelines WARNING! Internal circuits use hazardous voltage capable of causing death or serious personal injury. No operator serviceable parts inside. Refer servicing to qualified service personnel. The disconnecting devices for servicing are two Branch Circuit Breakers located in the building's Power Distribution Unit (PDU). Electric shock hazard Due to risk of electrical shock, do not attempt the following actions: ● Dismantle the electrical control cabinet.
Inhaltszusammenfassung zur Seite Nr. 8
Safety precautions Fire hazard CAUTION: The drying and curing subsystems of the printer operate at high temperatures. To avoid the risk of fire, take the following precautions when operating the printer: ● Do not manipulate the heating modules. ● Load substrates that withstand temperatures of 125°C. Heavy substrate hazard Special care must be taken to avoid personal injury when handling heavy substrates. ● Handling substrate rolls always requires at least two people. Care must be taken to avoid
Inhaltszusammenfassung zur Seite Nr. 9
Label Explanation Identifies the main earth terminal Danger of electric shock. Do not touch. Danger of electric shock. Do not touch. Danger of electric shock. In case of operation of the fuse, parts of the printer that remain energized may represent a hazard during servicing. Therefore, ensure that the printer is completely turned off before servicing. Printer parts may sometimes become hot. Do not touch. Use protective gloves for handling printer parts, supplies or waste. When substrate has bee
Inhaltszusammenfassung zur Seite Nr. 10
Safety precautions Label Explanation When the printer is printing, the printhead carriage travels back and forth across the substrate. Beware of this moving part. Emergency stop buttons There are four emergency stop buttons distributed around the printer. If an emergency occurs, simply push one of the emergency stop buttons to stop all printing processes. A system error message is displayed on the front panel, and the fans turn at maximum speed. Ensure that all emergency stop buttons are release
Inhaltszusammenfassung zur Seite Nr. 11
2 Printer status Check printer status You can check the current status of the printer in the following ways: The HP Internal Print Server displays the status of the printer, the loaded substrate and the ink ● system. The latest alerts are summarized at the bottom of the main window (see Printer alerts on page 5). The front panel displays the ink levels by default; otherwise, you can see the ink levels by selecting ● the the Ink System icon . In addition, the most important current alert, if any,
Inhaltszusammenfassung zur Seite Nr. 12
Printer calibration 3 Printer calibration Align the printheads Precise alignment between printheads is essential for color accuracy, smooth color transitions and sharp edges in graphical elements. To align the printheads, go to the HP Internal Print Server and select Printer > Printhead alignment. You can select automatic or manual alignment; the HP Internal Print Server will recommend one or the other, but you can always choose. ● Automatic alignment is a fully automated procedure that ensures
Inhaltszusammenfassung zur Seite Nr. 13
Troubleshoot printhead alignment Automatic printhead alignment may fail occasionally. In some cases, you may see the front panel error message "Automatic Printhead Alignment is cancelled because of scanning errors". In other cases, there is no error message but the print quality is not satisfactory. Here are some possible explanations. There is some problem with substrate advance (see Substrate-advance compensation ● on page 7). After fixing any substrate-advance issue, retry automatic printhead
Inhaltszusammenfassung zur Seite Nr. 14
Printer calibration You can view and change the substrate-advance compensation of the currently loaded substrate at any time from the HP Internal Print Server by selecting the print job and then the Printing Adj. button, or by selecting Printer > Printing adjustments. If you prefer the print quality after changing the figure in the Advance field, press the Apply button, and thereafter your preferred substrate-advance compensation will always be used for that particular substrate type. The substr
Inhaltszusammenfassung zur Seite Nr. 15
The calibration process is fully automatic and can be performed unattended after you have loaded substrate of the type you wish to calibrate. The process takes about 18 minutes and consists of the following steps. 1. The Closed-Loop Color Calibration and Ink Restriction Test Chart is printed, which contains scales of patches of each ink used in your printer. 2. The test chart is scanned and color-measured using the HP Embedded Spectrophotometer. If the scan cannot be completed successfully, a me
Inhaltszusammenfassung zur Seite Nr. 16
Printer calibration Color calibration is based on the color measurement of printed color patches, using the HP Embedded Spectrophotometer. Some characterisitics of substrates, such as surface roughness or transparency, may make reflective color measurement of some substrate types very inaccurate. Color calibration of these substrates will fail or produce unacceptable printing results. The suitability of particular substrate types for color calibration can be found in the table of supported subst
Inhaltszusammenfassung zur Seite Nr. 17
4 Hardware maintenance Maintain the ink cartridges During the normal lifetime of a cartridge, no specific maintenance is required. However, in order to maintain the best print quality, replace a cartridge when it reaches its expiration date. An alert notifies you when any cartridge reaches its expiration date. You can also check a cartridge's expiration date at any time: see Check printer status on page 5. Maintain the printheads During the normal lifetime of a printhead, no regular maintenance
Inhaltszusammenfassung zur Seite Nr. 18
Hardware maintenance Check the printheads If you believe that one or more of the printheads is performing poorly: 1. Go to the HP Internal Print Server and select Printer > Printhead cleaning. 2. Press the Check button to perform routine cleaning. 3. If the problem persists, press the Print button in the same window to print the following display. Each color is printed by a single printhead and shows the performance of that printhead. If a significant number of printhead nozzles are blocked, you
Inhaltszusammenfassung zur Seite Nr. 19
to the printheads, the carriage cover may need to be cleaned about once every two months, depending on your use of the printer. An alert is displayed when the cover needs to be cleaned. 1. Go to the front panel and select Clean carriage cover from the Preventive Maintenance menu . The carriage moves into the electrical compartment. 2. Open the printhead access door. 3. Press the OK key on the front panel. 4. Clean the carriage cover with a lint-free cloth. 5. If you find dried ink that you canno
Inhaltszusammenfassung zur Seite Nr. 20
Hardware maintenance 4. Standing at the front of the printer, clean the front rail using a lint-free cloth dampened with isopropyl alcohol. You can access the rail from above. NOTE: If you are in California, instead of isopropyl alcohol please use a VOC-certified cleaner such as a properly diluted 'Simple Green ® All-Purpose Cleaner'. 5. Standing at the rear of the printer, clean the rear rail in the same way. You can access the rail from below, through the gap between the platen and the pinches
