Resumen del contenido incluido en la página 1
H15/40
HERITAGE TRACTOR
CODE145S
INSTRUCTION BOOK
FROM SERIAL NO:145S001251 MANUAL PART NO:145010 (REV.0.)
F–000794J
Resumen del contenido incluido en la página 2
1 2 5 (0011x3) 1 4 (711758) 2 6 3 5 (711747) 3 4 (711644) 1 2 3 4 1 2 1 (711719) 2 (711663) 3 3 5 6 7 6 (711636) 3 6 7 5 5 6 10 7 (711680) 4 2 9 8 11 1 1 2 F–000794J 2
Resumen del contenido incluido en la página 3
11 8 10 7 7 3 1 2 4 12 5 6 10 9 1 2 6 7 5 7 6 5 2 1 8 2 3 1 8 3 11 12 1 2 3 1 4 5 2 F–000794J 3
Resumen del contenido incluido en la página 4
13 12 4 5 2 11 1 9 3 10 8 14 15 16 1 1 2 2 3 F–000794J 4
Resumen del contenido incluido en la página 5
17 18 2 3 1 1 4 19 1 2 21 20 1 3 2 1 3 4 4 F–000794J 5
Resumen del contenido incluido en la página 6
22 23 2 3 2 1 2 1 25 24 1 2 2 1 3 26 27 4 (711632) 711653 1 3 (711909) 711653 2 3 F–000794J 6
Resumen del contenido incluido en la página 7
28 29 5 6 1 6 5 7 (711741) 31 30 3 4 32 1 33 2 1 F–000794J 7
Resumen del contenido incluido en la página 8
34 1 2 35 36 1 4 1 3 2 3 2 37 1 2 4 3 5 F–000794J 8
Resumen del contenido incluido en la página 9
38 J 8 4 2 1 A 2 6 1 5 4 E B 3 11 C F 9 3 10 D H F–000794J 9
Resumen del contenido incluido en la página 10
39 12 346 5 7 8 11 12 13 10 14 15 9 17 16 18 40 12 3 4 5 6 78 9 10 11 12 13 14 15 41 711644 327350 711747 0011x3 711758 711719 711680 711636 711663 711632 711653 711741 711909 F–000794J 10
Resumen del contenido incluido en la página 11
GB LIMITED WARRANTY Hayter Limited warrants to the original user / purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufac- turers of the engine and battery pack system (where applicable) furnish their own warranty and services are pro- vided through their authorised network (Refer to “Engine/Battery Pack Warranty Statement”). To qualify for the full benefit of the warranty, th
Resumen del contenido incluido en la página 12
GB CONTENTS LIMITED WARRANTY 11 INTERNATIONAL PICTORIALS 12 OWNER’S INFORMATION 13 SAFE OPERATION PRACTICES 13 ASSEMBLY 14 OPERATION 15 MAINTENANCE 17 TROUBLE SHOOTING CHART 20 Bystanders Away. Read User Instructions 18 WARNING: When you hear the audible INTERNATIONAL PICTORIALS alarm it is time to empty the grass bagger. Before Operating This Machine. IMPORTANT: The following pictorials are lo- Control And Operating Pictorials 8 WARNING: Do Not Use This Machine On cated on your unit or on lite
Resumen del contenido incluido en la página 13
GB 2. Thoroughly inspect the area where the nor allow anyone near the machine while in OWNER’S INFORMATION equipment is to be used and remove all ob- operation. jects which may be thrown by the machine. Know your product: If you understand the unit 10. Never operate the mower with defective 3. WARNING – Petrol is highly flammable. and how the unit operates, you will get the best guards or shields, or without safety protec- performance. As you read this manual, compare tive devices in place. a. S
Resumen del contenido incluido en la página 14
GB 6. Remove the adhesive backing from the hub 3. Fasten the black cable 8 to the negative (–) ASSEMBLY cover (3) that was set aside earlier. Attach terminal with the fasteners (6) and (7). the hub cover (3) to the center of the steer- All fasteners are in the parts bag. Do not discard 4. Install the battery cover (3). ing wheel (1). any parts or material until the unit is assembled. 7. Some models have an optional decal in the WARNING: Before doing any as- How To Assemble The Grass Bagger parts
Resumen del contenido incluido en la página 15
GB Before you leave the operator’s position, How To Reset The Service Light OPERATION make sure the blade(s) has stopped rotating. To alert the operator that scheduled service is due, 4. Before you ride the unit across a sidewalk or the service light will automatically come ON. After a road, move the blade rotation control (1) NOTE: Illustrations and pictorials begin on the scheduled service is performed, the service to the DISENGAGE position. page 2. light can be easily reset as follows. 1. Rai
Resumen del contenido incluido en la página 16
GB position (2). The transmission is now con- 3. Move the lift lever to a height of cut position. How To Empty The Grass Bagger nected and ready to operate. In high or thick grass, cut the grass in the (Figure 32) highest position first and then lower the 1. Move the blade rotation control to the DIS- mower housing to a lower position. ENGAGED position. How To Use The Parking Brake 4. Move the throttle control to the SLOW posi- 2. While sitting on the seat, lift and pull the (Figure 8) tion. ha
Resumen del contenido incluido en la página 17
GB 4. Turn the ignition key to the START position. 2. (Figure 11) Move the blade rotation control Inspect Blade (Figure 10) to the DISENGAGE position (1). NOTE: If the engine does not start after WARNING: Before you inspect or four or five tries, move the throttle control 3. Stop the engine. Disconnect the wire from remove the blade, disconnect the the spark plug. to the FAST position. Again try to start the wire to the spark plug. If the blade engine. If the engine will not start, see the 4. Ch
Resumen del contenido incluido en la página 18
GB 6. To check the adjustment, drive the unit. If the 4. (Figure 16) Move the lift lever (1) to the How To Remove The Battery (Figure 6) adjustment is correct, the unit will now go level adjustment position (2). To charge or clean the battery (1), remove the into REVERSE. battery (1) from the unit as follows. WARNING: The lifter lever (1) is IMPORTANT: If you need assistance, go to spring loaded. Make sure the lift WARNING: To prevent sparks, dis- the nearest Authorized Service Centre. They leve
Resumen del contenido incluido en la página 19
GB and then back between the stack pulley and DISENGAGE position. WARNING: Never store the grass the steering plate (3). 2. Move the lift lever (2) to the level adjust- bagger with grass clippings in the 10.Remove the motion drive belt. A correct re- bags. Even a small amount of ment position. grass or debris can generate enough heat placement part or assistance is available 3. Remove the hair pins and the washers from from an Authorized Service Centre in your to start a fire. the adjuster arms
Resumen del contenido incluido en la página 20
GB 2. Raise the height of cut. PROBLEM: The engine does not run TROUBLE SHOOTING CHART smooth at fast speed. 3. Replace or sharpen the blade(s). 1. Replace the spark plug. 4. Move the shift lever to a slower speed. 2. Adjust the throttle control. 5. Move the throttle control to the FAST posi- PROBLEM: The engine will not start. tion. 3. Clean the air filter. 1. Follow the steps, “How To Start The Engine” 6. Replace the spring for the blade idler. 4. Replace the fuel filter. in this book. 2. Elec
