Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
INDEX BEFORE USING THE APPLIANCE .....................................................................2 Recommendations ...................................................................................................2 Installation and Switching On The Appliance .........................................................3 Before Switching On ..................................................................................................3 THE VARIOUS FUNCTION AND POSSIBILITIES .................
Resumen del contenido incluido en la página 3
PART- 1. BEFORE USING THE APPLIANCE Special Instructions • If this appliance is to replace an old refrigerator with a lock; break or remove the lock as a safety measure before storing it, to protect children while playing might lock themselves inside. • Old refrigerators and freezers contain insulation gases and refrigerant, which must be disposed of properly. Please ensure that the refrigeration tubing is not damaged. IMPORTANT NOTE: Please read this booklet before installing and switching on
Resumen del contenido incluido en la página 4
Installation and Switching On The Appliance • This appliance is connecting to 220-240V and 50 Hz. • You can offer help from the service to install and switching on the appliance without any cost. • Before making the connection to the power supply, ensure that the voltage on the nameplate corresponds to the voltage of electrical system in your home. • If the socket does not match the refrigerator plug, replace the plug with a suitable one (at least 16 A) • Insert the plug into a socket with an ef
Resumen del contenido incluido en la página 5
PART- 2. THE VARIOUS FUNCTION AND POSSIBILITIES Thermostat Setting FREEZER THERMOSTAT REFRIGERATOR THERMOSTAT Freezer and refrigerator thermostat automatically regulates the inside temperature of the compartments. By rotating the knob from position 1 to 5, colder temperatures can be obtained. In cold seasons, you can set lower positions in order to decrease the energy consumption. Freezer Thermostat Setting; 1 – 2 : For short-term storage of food in the freezer compartment, you can set the knob
Resumen del contenido incluido en la página 6
Accessories Magic Shelf (For some models) Magic shelf, which is on the crisper cover, was designed to give you more place and comfort placing the things in the appliance. This shelf is mobile so you can arrange long or big containers on the crisper cover. Making Ice Cubes • Take out the ice making tray • Fill the water in level of line. • Place the ice making tray in its original position • When ice cubes are formed, twist the lever to drop off ice cubes into the icebox. Do not fill the icebox w
Resumen del contenido incluido en la página 7
(For some models) Chiller Shelves Keeping food in the Chiller compartment instead of the freezer or refrigerator compartment allows food retain freshness and flavour longer, while preserving its fresh appearance. When chiller tray becomes dirty, remove it and wash it with water. (Water freezes at 0°C, but foods containing salt or sugar freeze at temperature lower than that) Normally people use the chiller compartment for raw fish, lightly pickled, rice, etc... Do not put foods you want to free
Resumen del contenido incluido en la página 8
(For some models) REMOVING THE CRISPER COVER First Step : Removing the crispers • It is easy to pull out the crisper because of the crisper has rollers. • Pull the crisper out as far as possible and pull the front part up and out Crisper Second Step: Taking out the partition crisper center between the crispers. • Bend the Partition toward left from the bottom of the part • Take out the Partition crisper Partition Crisper center Third Step: Taking out the crisper cover Nail Cavity • Pull out the
Resumen del contenido incluido en la página 9
(For some models) RESETTING THE CRISPER COVER First Step: Settle the crisper cover Nail Cavity • Put the crisper cover on its place fitting the nails and the cavities on the cabinet.. • Then push forward the crisper cover un- til it fits on its place. Nail Crisper cover Second Step: Placing the Partition Crisper centre • Place the partition on its cavities placed on the bottom of the cabinet and on the wall of the crisper housing like shown in the figure Partition Crisper center Third Step: Sett
Resumen del contenido incluido en la página 10
PART- 3. ARRANGING FOOD IN THE APPLIANCE Refrigerator Compartment • To set the refrigerator compartment to 2-3 graphic bar will be enough for normal conditions. • To reduce humidity and consequent increase of frost never place liquids in unsealed containers in the refrigerator. • Never place warm food in the refrigerator. Warm food should be allowed to cool at room temperature and should be arranged to ensure adequate air circulation in the refrigerator compartment. • Arrange the meat and clean
Resumen del contenido incluido en la página 11
• Frozen foods should be transported in appopriate containers to maintain the quality of the food and should be returned to the freezing surfaces of the unit in the shortest possible time. • If a package of frozen food shows the sign of humidity and abnormal swelling it is probable that it has been previously stored at an unsuitable temperature and that the contents have deteriorated. • The storage life of frozen foods depends on the room temperature, thermostat set- ting, how often the door is
Resumen del contenido incluido en la página 12
Defrosting • Defrosting occurs fully automatically during operation; the defrost water is collected by the evaporating tray and evaporates auto- matically. Replacing The Refrigerator and Freezer Light Bulb 1. Unplug the unit from the power supply, 2. Remove the refrigerator light cover with a minus screw driver, and take out the cover.(A) 3. Change the present light bulb with a new one of not more than 15 W.(B) 4. Replace the light cover and after waiting 5 minutes plug the unit.(C) UK - 11 - P
Resumen del contenido incluido en la página 13
TRANSPORTATION AND CHANGING OF PART- 5. INSTALLATION POSITION Transportation and Changing of Installation Position • The original packages and foamed polystyrene (PS) can be concealed if required. • In transportation the appliance should be tied with a wide stripe or a strong rope. The rules written on the corrugated box must be applied while transporting. • Before transporting or changing old installation position, all the moving objects (i.e., shelves, crisper…) should be taken out or fixed w
Resumen del contenido incluido en la página 14
BEFORE CALLING YOUR AFTER SALES SERVICE PART- 6. What to do if your refrigerator does not operate; Check that; • There is no power , • The general switch in your home is disconnected , • The thermostat setting is on« 0 »position , • The socket is not sufficient. To check this, plug in another appliance that you know which is working into the same socket. What to do if your refrigerator performs poorly; Check that; • You have not overloaded the appliance , • The doors are closed perfectly , • Th
Resumen del contenido incluido en la página 15
THE PARTS OF THE APPLIANCE AND THE PART- 7. COMPARTMENTS This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model. 1) FAST FREEZING SHELF 12) MAGIC SHELF 2) ICE TRAY 13) CRISPER COVER 3) ICE BOX 14) CRISPER 4) FREEZER THERMOSTAT BOX 15) KICK PLATE 5) FREEZER SHELF 16) FREEZER SHELF 6) FREEZER COMPARTMENT 17) EGG HOLDER 7) FREEZER LAMP BOX/COVER 18) TOP SHELF 8) CHILLER SHELVES 19) EGG SHELF 9) REFRIGERATOR THERMOSTAT BOX 20) AR
