Resumen del contenido incluido en la página 1
Contents
Introduction........................................................................................................................................1
Notational conventions ..............................................................................................................2
Important notes .................................................................................................................................2
Safety...................................................
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Introduction Your new LCD (Liquid Crystal Display) monitor 5110 FA offers numerous features and functions, for example: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) • high degree of brightness and good contrast • high resolution (1600x1200) for displaying the information content of a conventional 21- to 24-
Resumen del contenido incluido en la página 4
Colour monitor 5110 FA Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. ! Supplementary information, remarks, and tips follow this symbol. i Ê Text which follows this symbol describes activities that must be performed in the order shown. "Quotation marks" indicate names of chapters or terms
Resumen del contenido incluido en la página 5
Colour monitor 5110 FA • The ON/OFF switch does not disconnect the device from the mains voltage. To completely disconnect the mains voltage, remove the power plug from the socket. • Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the "Connecting the monitor" chapter. • No data transmission cable should be connected or disconnected during a thunderstorm. • Please ensure that no objects (e.g. necklaces, paperclips etc.) o
Resumen del contenido incluido en la página 6
Colour monitor 5110 FA Manufacturer’s notes Energy Star The Fujitsu Siemens LCD colour monitor 5110 FA is designed to conserve electricity by dropping to less than 3 W when it goes into standby, suspend and OFF mode. With this new power management the 5110 FA qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award. The EPA estimates that computer equipment uses 5% percent of all business electricity and that this is growing rapidly. If all desktop computers and
Resumen del contenido incluido en la página 7
Colour monitor 5110 FA Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product name: Colour LCD Monitor Trade name: Fujitsu Siemens Computers Inc. Model number(s): 5110 FA Name of responsible party: Siemens Information and Communication Products
Resumen del contenido incluido en la página 8
Colour monitor 5110 FA Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of normal use. Any components not reclaimed will be disposed of in an environmentally acceptable manner. If you have any questions on disposal, please contact your local
Resumen del contenido incluido en la página 9
Colour monitor 5110 FA Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. edge of desk permissible permissible reaching sector reaching sector 600 mm 600 mm Avoid direct and reflected glare. Avoid glare from electric Position the keyboard where it lighting. is easiest to reach. preferable viewing sector approx. 90° 65° 0° 30° 60° 30°
Resumen del contenido incluido en la página 10
Colour monitor 5110 FA Connecting the monitor Observe the "Safety" in the "Important notes" chapter in this operating manual. ! CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied. Do not cover the ventilation openings of the monitor. The computer power plug must be pulled out! Ê Be sure that the monitor and the computer are switched off. Connecting cables to the monitor The monitor ports are protected by a cover. Ê Remove the cover. ANALOG DIGITAL A
Resumen del contenido incluido en la página 11
Colour monitor 5110 FA If you want to use the data cable with DVI-D connector or if you want to connect the monitor to a second computer, proceed as follows: i Ê Connect the DVI-D connector of the data cable to the DVI-D connector on the monitor (3) and secure the plug-in connection by tightening the safety screws. Data cables with DVI-D connectors are available from specialised dealers. After switching on the monitor you must select the desired input with the OSD menu (see "Operation of the mon
Resumen del contenido incluido en la página 12
Colour monitor 5110 FA Switching the monitor on/off A B 2 1 1 = Power indicator 2 = Power button The ON/OFF switch (2) is used for switching the monitor on and off. The power indicator (1) can have the following states: The power indicator glows green. The monitor is switched on and operating. The power indicator glows amber. The monitor is in the energy-saving mode. The power indicator is dark. The monitor is switched off. When you switch the computer system on, you must proceed in the follow
Resumen del contenido incluido en la página 13
Colour monitor 5110 FA Notes on power management If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect. Stage ON E nergy-saving mode P ower indicator l ights green gl ows amber Function M onitor M onitor operating is dark
Resumen del contenido incluido en la página 14
Colour monitor 5110 FA Monitor settings with the buttons of the control panel B A 1 3 4 2 1 = Headphones port 3 = Power indicator 2 = Buttons for the OSD menu 4 = Power button (On-Screen-Display) Use the buttons of the control panel to make the following monitor settings directly while the OSD menu is switched off. Adjusting contrast, brightness and volume Ê Press the or button to activate the setting window for contrast, brightness and volume. Ê Use the B button to select the function
Resumen del contenido incluido en la página 15
Colour monitor 5110 FA To set the OSD menu, perform the following steps: Ê Briefly press the A button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. The last icon set is marked (in this case CONTRAST / BRIGHTNESS). At the bottom of the OSD menu each button's function is displayed. C ON T RAS T / BR IGH T N E S S Ê If necessary, press the or button to IM AGE AD J U S T mark another icon (e.g. IMAGE ADJUST). COL O R AD J U S T Ê Press t
Resumen del contenido incluido en la página 16
Colour monitor 5110 FA Adjusting the brightness and contrast Calling the CONTRAST / BRIGHTNESS setting window Setting the contrast of the display (CONTRAST) This function allows you to modify the contrast of bright colour tones. Setting the brightness of the display (BRIGHTNESS) This function allows you to change the brightness of the background lighting. If the contrast is set too high, bright surfaces can no longer be distinguished from very bright surfaces. If the contrast is set too low, the
Resumen del contenido incluido en la página 17
Colour monitor 5110 FA Setting colour temperature and colours Calling the COLOR ADJUST setting window Selecting the colour temperature (COLOR TEMPERATURE) The "warmth" of the screen colours is set using the colour temperature. The colour temperature is measured in K (= Kelvin). You can select from 9300 K, 6500 K, 5400 K and 5000 K. Setting user-defined colours (USER COLOR TEMPERATURE) In the user-defined setting you can change the colour ratios of the basic colours (red, green, blue) as required
Resumen del contenido incluido en la página 18
Colour monitor 5110 FA Setting functions in the "AUDIO MENU" menu Calling AUDIO MENU setting window Setting the volume for the output terminal (VOLUME) Muting the output terminal (MUTE) Setting functions in the "SETUP MENU" menu Calling SETUP MENU setting window Selecting input signal (INPUT SELECT) If the monitor is operated with analogue or digital signals, you can switch over between the analogue and the digital mode with this function (depending on the graphics card you use). Setting languag
Resumen del contenido incluido en la página 19
Colour monitor 5110 FA Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. When using several colours for characters and background and giving the primary colours full modulation, you can obtain very suitable colour combinations (see th
Resumen del contenido incluido en la página 20
Colour monitor 5110 FA Removing the monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base: Ê Lay the monitor on its face on a soft surface. The m onitor surface is susceptible to scratching! ! 2 ANALOG DIGITAL AUDIO POWER Fujitsu Siemens Computers T foh llis ow die ng t vice w c o c om ond p lie itis o n ws it: ( h P 1) T arth 1 is5 de ofv tih ce e F m Cay C no Rut l c ea su . O se p har eram tiofnul i isn s te urb fer jeen ct to ce ,th e Bgm. -Ul
