BEA SBK-30Tの取扱説明書

ページ1に含まれる内容の要旨

SBK-30
USER’S GUIDE
PHOTOELECTRIC BEAMS FOR GUIDE RAIL APPLICATIONS
1 Description
The SBK-30 (10.1029) is a self-contained infrared beam set that
may be used for various applications, most commonly automatic
pedestrian doors. The beams fi t easily into a pre-drilled ½” hole
and are a snap fi t. Wiring is by a quick disconnect cable that can
be daisy-chained up to 30’ (in 15’ increments). The beams offer
an LED indication at their back side for ease of alignment and
EMITTER RECEIVER
trou

ページ2に含まれる内容の要旨

4 Wiring If using a BEA LO-Linx lockout module, simply plug If using SBK30 beams directly, be sure the NPN/Light Operate output works with the door each beam into the connection point at the module. controller. The chart below shows wire color designations for the SBK-30 TX / RX: Connection points are identifi ed on the LO-Linx. TX / EMITTER RX / RECEIVER DESCRIPTION CABLE TX BEAM CABLE RX BEAM Ground Black Blue Black Blue NPN/Light Operate* White N/A White Black 10 to 30 VDC Red Brown Red Br