Instrukcja obsługi BEA SBK-30T

Streszczenie treści zawartej na stronie nr. 1

SBK-30
USER’S GUIDE
PHOTOELECTRIC BEAMS FOR GUIDE RAIL APPLICATIONS
1 Description
The SBK-30 (10.1029) is a self-contained infrared beam set that
may be used for various applications, most commonly automatic
pedestrian doors. The beams fi t easily into a pre-drilled ½” hole
and are a snap fi t. Wiring is by a quick disconnect cable that can
be daisy-chained up to 30’ (in 15’ increments). The beams offer
an LED indication at their back side for ease of alignment and
EMITTER RECEIVER
trou

Streszczenie treści zawartej na stronie nr. 2

4 Wiring If using a BEA LO-Linx lockout module, simply plug If using SBK30 beams directly, be sure the NPN/Light Operate output works with the door each beam into the connection point at the module. controller. The chart below shows wire color designations for the SBK-30 TX / RX: Connection points are identifi ed on the LO-Linx. TX / EMITTER RX / RECEIVER DESCRIPTION CABLE TX BEAM CABLE RX BEAM Ground Black Blue Black Blue NPN/Light Operate* White N/A White Black 10 to 30 VDC Red Brown Red Br