ページ1に含まれる内容の要旨
User’s Manual
IP Telephony Gateway
Model No.: SP5008A, SP5018A, SP5058A
Website: http://www.micronet.info
ページ2に含まれる内容の要旨
About this User’s Manual This User’s Manual gives users basic steps on installation and operation. Please read this manual chapter by chapter. Chapter 1. Introduction Introduce the IP Telephony Gateway to users in terms of feature, appearance, and application. Chapter 2. Startup Help user complete basic configuration. Chapter 4. Web Administration Provide command reference of Web Interface for advanced setting. Chapter 3. Operation Show user how to use the device to process p
ページ3に含まれる内容の要旨
Table of Content 1. ..Introduction.............................................................................................. 4 1.1 Key Features ................................................................................................ 4 1.2 Physical Description ..................................................................................... 5 2. ..Startup ...................................................................................................... 7 2.1 Login into th
ページ4に含まれる内容の要旨
3.3.4 Reset to Default............................................................................................. 58 3.3.5 Network Status .............................................................................................. 59 3.3.6 Version Info. .................................................................................................. 60 3.3.7 Port Status..................................................................................................... 61 3.3.8 Password
ページ5に含まれる内容の要旨
1. Introduction Micronet SP5008A / SP5018A / SP5058A are high-capacity SIP Gateway Series that provides 8 FXS / 4 FXS + 4 FXO / 8 FXO ports, and suit to build an IP-based communication platform with other VoIP devices. They meet enterprise’s requirement for functionality (VoIP) upgrade and larger scale implementation by interoperating with legacy PABX and IP PBX/Soft-switch. To connect with legacy PABX, SP5018A supports PABX Mode for PSTN backup. When network or power fails, PSTN lines
ページ6に含まれる内容の要旨
1.2 Physical Description SP5008A: SP5008A Front Panel SP5058A SP5058A Front Panel SP5018A SP5018A Front Panel LED Indicators LED Status Description POWER On / Green The Power is on READY Blink / Green Booting up for self test PROXY Blink / Green Gateway reg. fails Constant / Green Gateway reg. successes WAN Blink / Green Transmitting or receiving data /Network connection established LAN(1-4) Blink / Green Transmitting or receiving data /Network connection established
ページ7に含まれる内容の要旨
1*. SP5008A: FXS = T1 - T8 SP5018A: FXS = T1 - T4, FXO = L1 - L4 SP5058A: FXO = L1 - L8 SP5008A SP5008A Rear Panel SP5058A SP5058A Rear Panel SP5018A SP5018A Rear Panel --------------------------------------------------------------------------------------------------- RESET Factory default button. Press and hold for 5 seconds to reset T1-T8 The RJ-11 FXS port 1-8, connects analog phone sets, trunk line in PABX. L1-L8 The RJ-11 FXO port 1-8, connect to PSTN T1/P1-T4/
ページ8に含まれる内容の要旨
2. Startup 2.1 Login into the System First of all, connect your computer to MICRONET SP5008A / SP5018A / SP5058A’s LAN port by using DHCP. The IP address assign to your computer should be 192.168.123.x by default. Once you can get the IP address from MICRONET SP5008A / SP5018A / SP5058A, you can start the configuration as below. Step 1. Connect LAN port to your managing PC. Or, connect the gateway with PC by hub/switch. Step 2. Launch your web browser with http://192.168.123.123/. P
ページ9に含まれる内容の要旨
8
ページ10に含まれる内容の要旨
2.2 Network Configuration By default, the gateway is in NAT mode (router mode) and can share Internet access with PCs. Go to [ Network Configuration / WAN Setting ], and configure WAN setting according to actual condition. In default IP type of DHCP client, it requests necessary IP information from your ISP automatically. ----------------------------------------------------------------------------------------------------- Note: 1. Different ISPs require different methods of connecting t
ページ11に含まれる内容の要旨
WAN Setting Item Description Static IP DHCP PPPoE Connected mode Select the connection method for the WAN port of the SP5008A/SP5018A/SP5058A, you can choose the following: V V V Static IP DHCP PPPoE Current IP Address Show current IP address V V V DNS server mode Select the DNS behavior, you can choose the following: Auto Manual “DNS auto” will retrieve the DNS V V V information sent from the DHCP server. “Manual” will look at the specified Primary and Secondary DNS add
ページ12に含まれる内容の要旨
Item Description Static IP DHCP PPPoE Default gateway Specify the IP address of the default V gateway. Remote access Restricts/Blocks users connecting to restriction the WAN port’s IP remotely, you can V V V Enable/Disable this option. PPPoE userID Specify the username of the PPPoE V account PPPoE password Specify the password associated to V the PPPoE account above. Reboot after remote When the remote host (PPPoE) host disconnection fails, the gateway will retry 3 times to
ページ13に含まれる内容の要旨
2. Press the “Reboot” button to apply the changes. 2.2.2 DHCP 1. Press the “Apply” button (at the bottom) after you finish to save changes. 2. Press the “Reboot” button to apply the changes. ----------------------------------------------------------------------------------------------------- Note: When you are using DHCP in WAN and not connected, please make sure you connect Ethernet before use PC to connect to LAN port. ---------------------------------------------------
ページ14に含まれる内容の要旨
2.2.3 PPPoE 1. Input PPPoE user ID and password 2. Press the “Apply” button (at the bottom) after you finish to save changes. 3. Press the “CANCEL” button (next to the Apply button) to clear the values in the page. 4. Press the “Reboot” button to apply the changes. 13
ページ15に含まれる内容の要旨
2.2.4 LAN Setting ITEM Description LAN IP address Specify the IP address of the SP5008A / SP5018A / SP5058A LAN port. LAN mask address Specify the mask address for SP5008A / SP5018A / SP5058A LAN port. DHCP server Enable/Disable DHCP function on the LAN port. Once enabled, the LAN ports will function as a DHCP server, network devices connected to them will be issued with IP addresses. IP address from When DHCP is enabled, you can specify the IP address to start from when assi
ページ16に含まれる内容の要旨
ITEM Description Domain Name You can specify the domain name that will be assigned by the DHCP server to the attached network devices. The DHCP server will send information on the “server host name” to the DHCP client. Lease time(sec) You can specify the maximum lease time of the IP address allocated to the DHCP client. DNS server mode Select the DNS behavior, you can choose the following: Auto Manual “DNS auto” will retrieve the DNS information sent from the DHCP server. “Manu
ページ17に含まれる内容の要旨
2.3 General configuration To make VoIP calls, you will need a SIP account provided by the SIP Proxy you are registered with. To configure the relevant SIP settings, please refer to the instructions explained below. 2.3.1 PABX Mode (SP5018A only) This quick setting is used for MICRONET SP5018A to operate in PABX connection mode between PSTN and traditional PABX. Enable PABX mode for ISP/ITSP scenario that forbids SIP call to/from PSTN via the gateway (SP5018A). The call scenario will
ページ18に含まれる内容の要旨
3.3.2.1 Primary FXS SIP settings When you have multiple SIP accounts for each FXS line, please set Representative Number Only to No. Then refer to 3.3.2.1 for the detail FXO Dialing Prefix When the prefix is set here, the call will be route to FXO instead of VOIP. 17
ページ19に含まれる内容の要旨
2.3.2 SIP Setting Primary proxy/P2P IP Specify the data of primary proxy : Enable/Disable, IP address, Port#, Domain Name, Expire time and MWI TTL. The P2P mode will be explained in paragraph Appendix A Secondary proxy Specify the data of secondary proxy: Enable/Disable, IP address, Port#, Domain Name, Expire time and MWI TTL. When you enable secondary proxy, it will start to register no matter whether primary proxy is registered or not. However, it will be used only when primary p
ページ20に含まれる内容の要旨
Register or Unregister to SIP Proxy Account Input the SIP Proxy registration account ID. Number Input the phone number. Password Input the password of IP Proxy registration account ID. Specify the Display name of the phone number Display name Forward Specify the Representative forwarding type to be used, only choose busy Forward Number Specify the number to be forwarded when the specified forward condition is met. Ring Type Select the Ring Type of representative number. You can choos
