ページ1に含まれる内容の要旨
Futura F144 and F131 w/ Blender
OWNER'S MANUAL
Manual No. 513603-1 March 2005
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Need Parts or Service? We stock the parts you need. Our Technicians are factory trained and are certified in the Stoelting Technicare program. CALL Distributor: _________________________ Phone No.: _________________________ (fill in or affix label) Model No.: _______________________ Serial No.: _______________________ Purchase Date: ____________________ Start-Up Date:____________________
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Owner's Manual For Futura F144/SF144 Stoelting Counter Model Gravity Freezer Soft Serve/Shake This manual provides basic information about the freezer. Instructions and suggestions are given covering its operation and care. The illustrations and specifications are not binding in detail. We reserve the right to make changes to the freezer without notice, and without incurrring any obligation to modify or pro- vide new parts for freezers built prior to date of change. DO NOT ATTEMPT to operate the
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
A Few Words About Safety Safety Information Safety Alert Symbol: Read and understand the entire manual before This symbol Indicates danger, warning or caution. operating or maintaining Stoelting equipment. Attention is required in order to avoid serious personal injury. The message that follows the symbol contains This Owner's Manual provides the operator with important information about safety. information for the safe operation and maintenance of Stoelting equipment. As with any machine, ther
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
TABLE OF CONTENTS SECTION 1 - SPECIFICATIONS .................................................................................. 1 1.1 Description ............................................................................................................ 1 1.2 Specifications ......................................................................................................... 2 SECTION 2 - INSTALLATION INSTRUCTIONS .......................................................... 3 2.1 Safety Precau
ページ10に含まれる内容の要旨
LIST OF ILLUSTRATIONS Fig. Description Page 1 Model Endura/Futura 131G Freezer ................................................................... 1 2 Specifications .................................................................................................... 1 3 Warning Label Locations .................................................................................... 3 4 Space and Ventilation Requirements .................................................................. 4 5 Install
ページ11に含まれる内容の要旨
SECTION 1 SPECIFICATIONS 1.1 DESCRIPTION The Stoelting Futura F144 and F131 w/ Blender countertop combination shake/softserve freezers are gravity fed. The freezers are equipped with fully automatic controls to provide uniform product. The freezer is designed to operate with almost any type of commercial soft serve and shake mixes available, including ice milk, ice cream, yogurt, and frozen dietary desserts. The F144 series freezers allow the operator to dispense outstanding soft serve from the
ページ12に含まれる内容の要旨
1.2 SPECIFICATIONS MODEL FUTURA 144 COUNTERTOP COMBINATION SHAKE/SOFTSERVE GRAVITY FREEZER Dimensions: Freezer: 22" (56 cm) wide x 28" (72 cm) deep x 34.75" (88 cm) high Crated: 28" (71 cm) wide x 35 1/2" (89.4 cm) deep x 40.3" (102.4 cm) high Weight: Freezer: 385 lbs. (174.6 kg) Crated: 470 lbs. (213.2 kg) Electrical: Approximately 11 total running Amps, 20 Amp. maximum fuse or circuit breakers. NEMA 6-20P power cord provided. Automatic safeguard circuit built into electronic control - protects
ページ13に含まれる内容の要旨
SECTION 2 INSTALLATION INSTRUCTIONS 2.1 SAFETY PRECAUTIONS Labels should be checked periodically to be sure they Do not attempt to operate the freezer until the safety can be recognized as warning labels. precautions and operating instructions in this manual are read completely and are thoroughly understood. If danger, warning or caution labels are needed, indicate the part number, type of label, location of label, and Take notice of all warning labels on the freezer (Fig. 3). quantity required
ページ14に含まれる内容の要旨
2.2 SHIPMENT AND TRANSIT CAUTION The freezer has been assembled, operated and in- spected at the factory. Upon arrival at the final destina- Failure to provide adequate ventalation will void tion, the complete freezer must be checked for any Warranty. damage which may have occurred during transit. D. Place the OFF-ON switch in the OFF position. See With the method of packaging used, the freezer should Figure 8. arrive in excellent condition. THE CARRIER IS RE- SPONSIBLE FOR ALL DAMAGE IN TRANSIT
ページ15に含まれる内容の要旨
2.4 FLOOR STAND INSTALLATION 2.5 INSTALLING PERMANENT WIRING To install the F144 on the floor stand, follow the steps outlined below. WARNING 1. Uncrate the floor stand and place in an upright posi High voltage will shock, burn or cause death. Turn tion. off and lock out main power disconnect before proceeding with installation. Do not operate NOTE machine with cabinet panels removed. Detailed instructions are included with each floor stand. 2. Place a spirit level across the top of the stand t
ページ16に含まれる内容の要旨
6
ページ17に含まれる内容の要旨
SECTION 3 INITIAL SET-UP AND OPERATION 3.1 OPERATOR'S SAFETY PRECAUTIONS G. Do not operate under unsafe operating condi SAFE OPERATION IS NOT AN ACCIDENT; Observe tions. Never operate the freezer if unusual or exces these rules: sive noise or vibration occurs. A. Know the freezer. Read and understand the Operating Instructions. 3.2 OPERATION CONTROLS AND INDICATORS B. Notice all warning labels on the freezer. Before operating the freezer, it is required that the operator know the function of eac
ページ18に含まれる内容の要旨
WARNING E. CLEAN SWITCH The CLEAN switch is a "snap" switch. When the switch High voltage will shock, burn or cause death. The is pushed the refrigeration system will be OFF and the OFF-ON switch must be placed in the OFF position auger will rotate for cleaning. When the switch is prior to disassembling for cleaning or servicing. Do pushed again, the auger will stop and the CLEAN light not operate machine with cabinet panels removed. will flash indicating the freezer is in the CLEAN mode. To exi
ページ19に含まれる内容の要旨
L. BLENDER POWER SWITCH (F131 Models Only) The blender power switch is a two position toggle switch used to supply power to the blender. When the switch is in the OFF position, the agitator will not turn. When the switch is in the ON position, the agitator will be activated every time the blender activation switch is pressed. M. BLENDER ACTIVATION SWITCH (F131 Models Only) The blender activation switch is a two speed, momen tary contact switch that will actuate the agitator to blend product when
ページ20に含まれる内容の要旨
D. Clean sides of hopper, mix inlet regulator and under- side of hopper cover using a sanitized soft bristle brush dipped in the sanitizing solution (Fig. 13). Figure 15. Sanitizing Agitator Shaft Figure 13. Sanitizing Hopper 3.4 FREEZE DOWN AND OPERATION E. After five minutes, place a bucket under the spigot This section covers the recommended operating proce- and open spigot to drain sanitizing solution. When dures to be followed for the safe operation of the solution has drained, press the
