Fishman の取扱説明書

ページ1に含まれる内容の要旨

PART I - PREPARATION
EXCEPTION: Pickups in guitars with a very steep string break angle
PARTS LIST TOOLS
 Slider Bezel  Caliper (25° or more), will generally perform well, even if the saddle slot depth
 Preamp  Router with 1/8" (3 mm) measures more than 50% of the total saddle height.
 Acoustic Matrix Pickup (or .9375" Plunging Cutter
 1/4" Stereo Jack, with hardware for Narrow Format)
COMPENSATED SADDLES
 4-40 Screws (4), 3/16" length, with  400 Grit Sandpaper or Scraper
We do not reco

ページ2に含まれる内容の要旨

MOUNT THE PREAMP OPERATION PART I - PREPARATION Cont’d. PART II - INSTALLATION The output jack of the Acoustic Matrix Professional System is also the The hardware supplied will accommodate guitars with laminated sides power switch for the battery. that are between .100" and .175" thick. If your guitar has sides less When a cable is first plugged into this jack, the BATT/LOW LED will flash a complete stop before removing it from the hole. PREAMP CUT-OUT than .100" thick, the slider knobs will not