ページ1に含まれる内容の要旨
TM
NI MATRIXx
TM
AutoCode Reference
AutoCode Reference
April 2007
370768C-01
ページ2に含まれる内容の要旨
Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide Offices Australia 1800 300 800, Austria 43 662 457990-0, Belgium 32 (0) 2 757 0020, Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 5050 9800, Czech Republic 420 224 235 774, Denmark 45 45 76 26 00, Finland 385 (0) 9 725 72511, France 33 (0) 1 48 14 24 24, Germany 49 89 7413130, India 91 80
ページ3に含まれる内容の要旨
Important Information Warranty The media on which you receive National Instruments software are warranted not to fail to execute programming instructions, due to defects in materials and workmanship, for a period of 90 days from date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace software media that do not execute programming instructions if National Instruments receives notice of such defects during the warranty per
ページ4に含まれる内容の要旨
Conventions The following conventions are used in this manual: <> Angle brackets that contain numbers separated by an ellipsis represent a range of values associated with a bit or signal name—for example, DIO<3..0>. » The » symbol leads you through nested menu items and dialog box options to a final action. The sequence File»Page Setup»Options directs you to pull down the File menu, select the Page Setup item, and select Options from the last dialog box. This icon denotes a note, which aler
ページ5に含まれる内容の要旨
Contents Chapter 1 Introduction Manual Organization .....................................................................................................1-1 General Information.......................................................................................................1-2 Configuration File..........................................................................................................1-2 Language-Specific Information ...........................................................
ページ6に含まれる内容の要旨
Contents Linking Procedures with Real-Time Applications or Simulator .................... 2-22 Invoking Generated Procedures Directly.......................................... 2-22 Invoking Procedures Using Generated UCB Wrapper Function...... 2-24 Invoking Procedures Using Generated Subsystem Function ........... 2-25 C Fixed-Point Arithmetic .............................................................................................. 2-26 Fixed-Point AutoCode/C Implementation ................
ページ7に含まれる内容の要旨
Contents External_Input ( ) Procedure.............................................................3-10 External_Output( ) Procedure ...........................................................3-11 UserCode Blocks ...........................................................................................................3-11 Linking Handwritten UCBs with AutoCode Applications..............................3-11 Calling UCBs..............................................................................
ページ8に含まれる内容の要旨
Contents Chapter 4 Generating Code for Real-Time Operating Systems Real-Time Operating System Configuration File.......................................................... 4-1 Configuration Items ........................................................................................ 4-2 Table Syntax ................................................................................................... 4-2 Table Naming Convention................................................................ 4-3 Tab
ページ9に含まれる内容の要旨
Contents System External Interface Layer .....................................................................5-7 Discrete Subsystem Interface Layer................................................................5-8 Single-Rate System...........................................................................5-8 Multi-Rate System ............................................................................5-8 Sample and Hold..........................................................................
ページ10に含まれる内容の要旨
Contents States ............................................................................................................... 5-26 Local Variables and Phases .............................................................. 5-27 Discrete Semantics ........................................................................... 5-27 Continuous Semantics ...................................................................... 5-29 Looping Concepts ..........................................................
ページ11に含まれる内容の要旨
Contents Definitions and Conventions ...........................................................................5-45 Shared Memory Fixed-Point Callouts in AutoCode/C .....................5-46 Shared Variable Block Support.......................................................................5-47 Shared Memory Callout Option........................................................5-50 Global Variable Block Callouts.......................................................................5-51 Callout
ページ12に含まれる内容の要旨
Contents Chapter 7 Code Optimization Read from Variable Blocks ........................................................................................... 7-1 Restart Capability .......................................................................................................... 7-5 Merging INIT Sections.................................................................................................. 7-8 Reuse of Temporary Block Outputs.......................................................
ページ13に含まれる内容の要旨
Contents Variable Block Aliasing....................................................................9-4 Monitored Signals within a Procedure SuperBlock..........................9-4 Monitoring Procedure External Outputs ...........................................9-4 Parameterless Procedure ................................................................................................9-5 Specifying Parameterless Procedure Interface ................................................9-5 Input Specifi
ページ14に含まれる内容の要旨
1 Introduction This manual provides reference material for using AutoCode to write production quality code using graphical tools. Together with the AutoCode User Guide and the Template Programming Language User Guide, AutoCode documentation describes how to generate robust, high-quality, real-time C or Ada source code from SystemBuild block diagrams. Manual Organization This manual includes the following chapters: � Chapter 1, Introduction, provides an overview of the rapid prototyping con
ページ15に含まれる内容の要旨
Chapter 1 Introduction � Chapter 8, AutoCode Sim Cdelay Scheduler, discusses the Sim Cdelay low-latency scheduler. � Chapter 9, Global Scope Signals and Parameterless Procedures, discusses additional signals and procedures. This guide also has an Index. General Information As an integral part of the rapid prototyping concept, AutoCode lets you generate high-level language code from a SystemBuild block diagram model quickly, automatically, and without programming skills. The AutoCode User Gu
ページ16に含まれる内容の要旨
Chapter 1 Introduction Structure and Content of the Generated Code This reference includes detailed descriptions about what is generated for many of the blocks used within a model. Also, the framework of the generated code is discussed to show how all of the pieces work together to form an executable simulation. This discussion is only relevant to those designers who are either writing their own templates or who are striving to optimize the generated code. Topics include the following: � G
ページ17に含まれる内容の要旨
Chapter 1 Introduction Related Publications National Instruments provides a complete library of publications to support its products. In addition to this guide, publications that you may find particularly useful when using AutoCode include the following: • AutoCode User Guide � Template Programming Language User Guide � Xmath User Guide � SystemBuild User Guide � BlockScript User Guide � DocumentIt User Guide For additional documentation, refer to the MATRIXx Help or visit the National Instru
ページ18に含まれる内容の要旨
2 C Language Reference This chapter discusses files used to interface AutoCode and the generated C code to your specific platform and target processor. This chapter also describes target-specific utilities needed for simulation and testing. Stand-Alone Simulation The template provided for C code generation produces code that, when compiled and linked with stand-alone files, forms a stand-alone simulation. This simulation can be executed with MATRIXx-style data as input, and produces results
ページ19に含まれる内容の要旨
Chapter 2 C Language Reference Table 2-1. Recognized C Preprocessor Defines for Supported Platforms Platform Preprocessor Define Compiler Switch -DIBM AIX (IBM UNIX) IBM -DOSF1 Compaq Tru64 5.0 OSF1 -DHP700 HPUX (700 series) HP700 -DHP HPUX (other than 700) HP -DSGI SGI IRIX SGI -DSOLARIS Sun Solaris 2.x SOLARIS -DMSWIN32 Windows 2000/NT/9x MSWIN32 Stand-Alone Library This section describes the system-specific and target-specific stand-alone (sa) files supplied with your system. System-Specif
ページ20に含まれる内容の要旨
Chapter 2 C Language Reference Table 2-2. Distribution Directories and Files (Continued) Platform UNIX Windows $CASE/ACC/templates %CASE%\ACC\templates Templates Directory: c_sim.tpl, c_sim.tpl, Templates: c_intgr.tpl c_intgr.tpl Direct Access c_sim.dac c_sim.dac Templates: $XMATH/demos %XMATH%\demos Demos Directory: � The principal file is sa_utils.c, the stand-alone utilities file. At the time that you compile sa_utils.c and your generated code program, you must make the following hea
