ページ1に含まれる内容の要旨
Tyan S1598
Trinity ATX
Motherboard User’s Manual
Revision 1.00
Copyright © Tyan Computer Corporation, 1999. All rights reserved. No part of this
manual may be reproduced or translated without prior written consent from Tyan
Computer Corp.
All registered and unregistered trademarks and company names contained in this
manual are propery of their respective companies including, but not limited to the
following.
AwardBIOS is a trademark of Award Software Inc.
Windows is a trademark of Microsoft Corp
ページ2に含まれる内容の要旨
Table of Contents 1. Introduction.....................................................................................................4 Overview..................................................................................................... 4 Icons............................................................................................................ 5 Hardware Specifications/Features.......................................................... 5 Software Specifications....................
ページ3に含まれる内容の要旨
This page has been intentionally left blank.
ページ4に含まれる内容の要旨
Chapter 1 Introduction Introduction Overview The S1598 Trinity ATX is a quality, high performance mainboard designed for Socket 7 microprocessors. This mainboard utilizes the VIA MVP3 100MHz AGPset and host bus speeds of 66MHz to 100MHz. For CPU speed support, please refer to the CPU Compatibility Chart in Tyan’s website (http://www.tyan.com/support/html/socket_7_compatibility.html). The Trinity ATX also has 100MHz Front Side Bus support, which allows you to take full advantage of 100MHz SDRA
ページ5に含まれる内容の要旨
INTRO http://www.tyan.com. There you can find information on all of TYAN’s products along with FAQs, distributors list, drivers, and BIOS setting explana- tions. Icons In order to help you navigate this manual and set up your system, we have added several icons to our format. This icon alerts you to particularly important details regarding the setup or maintenance of your system. This icon often appears next !!!!! to information that may keep you from damaging your board or important! system. Wh
ページ6に含まれる内容の要旨
Chapter 1 Introduction On Board Cache •On board Pipeline Burst SRAM 1MB •512K or 2MB (manufacturing option) Chipset Information •VIA MVP3 100MHz memory & AGP controller(VT82C598AT) •VIA VT82C686 Super I/O controller BIOS Information •Award BIOS on 2MB flash RAM •Plug and Play •APM 1.2 / ACPI 1.0 / PC98 compliant •IDE drive auto configure •Soft power-down •Multiple boot options •DMI 2.0 compliant •Hardware monitoring of CPU voltage, temperature, and Fan status System Memory •Supports 8MB to 76
ページ7に含まれる内容の要旨
INTRO On Board Audio (Manufacturing Option) •VIA VT82C686 digital link audio •AC-97 Codec on board •One MIDI / Game port •Line-in MIC-in and Line-out ports •4-pin CD-ROM audio (ATAPI) header •4-pin Video-in (ATAPI) header Other Features •3-pin Wake on LAN header* •3-pin Wake on Ring •Two 3-pin Fan speed monitoring support Form Factor •ATX design (8.3” x 12.0”) •4 Layer board •20-pin ATX power connector •Stacked (double row) I/O connectors * Requires ATX 2.01 power supply Software Specifications
ページ8に含まれる内容の要旨
Chapter 1 Introduction Help resources: 1. See FAQ and beep codes sections of this manual. 2. See Tyan web site for FAQ, bulletins, driver updates, etc. http://www.tyan.com 3. Contact your dealer or distributor for help BEFORE calling Tyan. 4. Email Tyan tech support: techsupport@tyan.com 5. Call Tyan tech support: 510-440-8808 Returning Merchandise for Service During the warranty period, contact your distributor or system vendor FIRST for any product problems. This warranty only covers normal cu
ページ9に含まれる内容の要旨
INSTALL Board Installation Unpacking The mainboard package should contain the following: (1) S1598 mainboard (1) 40-pin IDE and 34-pin floppy cable pack (1) S1598 User’s Manual (1) Driver CD Precautions What’s the first thing I should do? The first thing you should do is read this user’s manual. It contains important information which will make configuration and setup much easier. Here are some precautions you should follow when installing your mother- board: (1) Ground yourself properly befor
ページ10に含まれる内容の要旨
Chapter 2 Board Installation and then touch any metal part on the computer case. (Or wear a grounded wrist strap.) !! !!! (2) Hold the motherboard by its edges and do not touch the bottom of important! the board. (3) Avoid touching motherboard components, IC chips, connectors, and leads. (4) Avoid touching pins of memory modules and chips. (5) Place motherboard on a grounded antistatic surface or on the antistatic bag. Having reviewed the precautions above
ページ11に含まれる内容の要旨
INSTALL 6. Connect Power Supply 7. Install Add-on Cards 8. Connect PS/2, USB, Serial and Parallel Devices What is a Jumper? In this manual, the terms “closed” and “on” are used when referring to jumpers (or jumper pins) that are active; “open” and “off” are used when referring to jumpers (or jumper pins) that are inactive. See the Figure 2-1 for examples of “on” and “off” pins and jumpers. The square pin in the diagram is Pin 1. Jumpers and pins are connected by slipping the blue plastic jumpe
ページ12に含まれる内容の要旨
Chapter 2 Board Installation Map of Motherboard Jumpers ATX power connector Kbrd 1 Mouse USB Socket 7 Com 1 Fan1 Parallel Com 2 VIA MVP3 Speaker chipset Line in Mic in AGP port CD In 1 Video 1 PCI slot 1 PCI slot 2 Fan2 WOL 1 VIA MVP3 JP13 PCI slot 3 chipset USB3 3 volt WOR USB2 lithium 1 PCI slot 4 battery PCI slot 5 Award BIOS ISA slot 1 J3 ISA slot 2 J4 1 1 J5 The tiny number “1”s next to jumpers of 3 pins or more indicate the position of pin 1 for that jumper. http://www.tyan.com 12 (Audio
ページ13に含まれる内容の要旨
INSTALL VIA MVP3 AGP port Picture of Motherboard Features ATX power CPU connector temperature 3 DIMM slots 1MB L2 PS/2 mouse sensor ZIF Socket 7 cache PS/2 Keyboard USB header 5 PCI slots 2 ISA slots Award BIOS S1598 Trinity ATX 13
ページ14に含まれる内容の要旨
Chapter 2 Board Installation 1. Setting Jumpers 1-A. CPU Bus Speed Settings 1-B. CPU Clock Multiplier B4 us Speed J5 P J6 P JP M1 ultiplierJ2 P J3 P JP 23 -3 23 - 2- 2.5x ON N OF OF 60MHz 13 -2 23 - 2- 3x ON FFOF OF 66MHz OF FFOF F OF 75MHz 12 -2 13 - 2- 3.5x OF N ON F O 83MHz 13 -2 22 - 1- 4x 22 -3 12 - 1- ON N ON O 95MHz 4.5x 12 -2 12 - 1- 5x ON FF ON O 100MHz 5.5x OF FFON F O 1-C. CPU Core Voltage Settings CPU VoltageJ9 P8J0 PJ1 P1J2 P1 JP1 CPU VoltageJ9 P8J0 PJ1 P1J2 P1
ページ15に含まれる内容の要旨
INSTALL 1-D. J3 External Pin Assignments VCC 1 2 Power LED Pin2 Pin1 LED 3 4 Ground Pin18 Ground 5 6 Power On/Off Switch 7 8 Ground Pin17 VCC 9 10 Ground Receive 11 12 K/B Lock IRRX 13 14 Ground Ground 15 16 SMI Switch J3 Side View IRTX 17 18 Ground 1-E. FAN Pin Assignments 12 3 FAN1, FAN2 GV ND+r 12 Fan Monito 1-F. Memory Clock M7 emory Clock JP The memory clock can be set to run at the CPU CPU Clock 1-2 clock speed or to the AGP bus speed (normally AGP Clock 2-3 66MHz). The benefit of this s
ページ16に含まれる内容の要旨
Chapter 2 Board Installation ACPI Bi-Color LED Connector (J5) This connector provides a bi-color (green / yellow) LED for your computer chassis. When the computer system is On, the Green LED will light up. If the system is on stand-by mode, the Yellow LED will light up. Whenever there is an incoming message, the LED will flash on and off. Soft Power Connector The Soft Power Connector is located on pins 6 and 8 of jumper block J3. Pressing the Soft Power Button will turn the sytem on and off.
ページ17に含まれる内容の要旨
INSTALL bottom of the plastic standoff so that the flat portion rests on the metal. The adapter cards and the screws holding them down will keep your board flat. The fastening screw should not short any of the traces on the motherboard. Make certain that you do not overtighten the screw, as it will damage the mother- board and possibly break internal traces in the surrounding area. The hole you should use is located at the top-center of the board where the adapter cards are fastened to the case.
ページ18に含まれる内容の要旨
Chapter 2 Board Installation Figure 2-3 *The image above is used to illustrate a concept and may not represent the actual image of your motherboard. To install your DIMMs, line your module up so that the pins fit into the slot. There is only one way that your DIMM can fit properly. Make sure that the short row of pins is lined up with the short gap in the DIMM slot. Figure 2-3 above shows how to sit the DIMM into its slot. To insert the DIMM, push down vertically on the module with even force, a
ページ19に含まれる内容の要旨
INSTALL Figure 2-4 *The image above is used to illustrate a concept and may not represent the actual image of your motherboard. Some details of memory installation: • The mainboard supports 32MB, 64MB, 128MB SDRAM modules. • PC-100 DIMMs are required if CPU bus speed is at 100MHz • SDRAM, Parity, and ECC (using Parity memory) memory is supported. Unbuffered RFU 168-pin DIMM Buffered Figure 2-5 Cache Memory The Trinity ATX has 1MB (or 2MB) of onboard pipeline burst SRAM. This SRAM cannot be upgra
ページ20に含まれる内容の要旨
Chapter 2 Board Installation 4. Installing the CPU and Cooling Fan Socket 7 processors (see Specifications on page 5) can be used on the Trinity ATX. Please refer to page 14 for the cor- rect CPU jumper settings for your CPU. Remember: • The CPU is a sensitive electronic component and it can easily be damaged by static electricity. Do not touch the CPU pins with your fingers. • Before the CPU is installed, the mainboard must be placed on a flat Figure 2-6 surface. You should be able to insert th
