ページ1に含まれる内容の要旨
Maintenance
Ribbon Cassette and
Correcting Cassette
WARNING: Use Smith Corona brand “H” Series supplies. Use of non-
Smith Corona (brand or manufactured) supplies or accessories
will not (except as noted below) void this warranty.
THE WARRANTY WILL BE VOID if the typewriter is
damaged or rendered wholly or partially inoperable as a result
of using a non-Smith Corona supply or accessory item(s).
®
Right Ribbon System Feature
Your Smith Corona typewriter uses ribbon and correcting cassettes with
ページ2に含まれる内容の要旨
Removing the Ribbon Cassette Replace the ribbon cassette when a different colored portion begins to unwind from it. 1. Tilt the sound shield toward you. 2. Grasp cassette on both sides. 3. Lift cassette STRAIGHT up and out. Inserting the Ribbon Cassette 1. Turn the gear wheel on the bottom of the cassette in the direction indicated to tightly wind the cassette. 2. Turn the cassette over with the name face up and the ribbon toward the print hammer. 3. Set the cassette in the carrier while guiding
ページ3に含まれる内容の要旨
Inserting a New Correcting Cassette 1. Turn the gear wheel on the bottom of the correcting cassette in the direction indicated by arrows to wind tightly. 2. Hold the correcting cassette (using both hands as shown) with the Smith Corona name facing up. 3. Guide the correcting tape between the printwheel and the typing guide and position the left gear wheel on the left mount and the right gear wheel on the right mount. 4. Snap the correcting cassette securely in place. IMPORTANT: After the casset
ページ4に含まれる内容の要旨
Printwheels Removing the Printwheel 1. Tilt the sound shield toward you. 2. Remove the ribbon and correcting cassettes. 3. Locate the print hammer release lever (left of the print hammer). Pull the lever forward until the print hammer mechanism springs away from the printwheel. 4. Lift the printwheel out. Inserting a Printwheel 1. Drop the printwheel between the print hammer and the typing guide with the type style name facing you. 2. Push the print hammer release lever back until the print hamm
ページ5に含まれる内容の要旨
Cleaning Do not attempt to disassemble the typewriter to clean it. IMPORTANT: Always unplug the machine before using cleaning solutions on its surfaces. Printwheel To remove residue, dip the characters into a small container of ethyl or isopropyl alcohol (rubbing alcohol) and wipe with a clean dry cloth. Do not soak the printwheel. Platen Wipe the surface with a clean cloth dampened with ethyl or isopropyl alcohol (rubbing alcohol). Cover/Keyboard/Sound Shield To clean the cover, keyboard, or s
ページ6に含まれる内容の要旨
Obtaining Service If you are experiencing difficulty, before returning the unit for service, call Consumer Affairs, toll-free at 1-800-448-1018, for assistance. Customer Service Representatives are available to assist you Monday through Friday, from 8:00 AM to 6:00 PM. NOTE: If you need to send your unit for service, to qualify for Warranty, proof of purchase must accompany the unit. Your sales receipt is your proof of purchase. Shipping Instructions IMPORTANT: When the machine is to be shippe
ページ7に含まれる内容の要旨
6. Move the carrier to the right end of the machine until it locks into place. You will hear it click into place. 7. Wrap the cord around the cord wrap panel approximately three (3) times. Some excess cord will remain loose. 8. Secure the plug in the protection slot, and snap the cord into the cord restraint. 9. Tuck the excess cord up under the lip. 10. Return the sound shield to its original position and tape shut. 11. Place the keyboard cover on the typewriter. Your typewriter is ready for
ページ8に含まれる内容の要旨
Packing the Typewriter Pack the typewriter in the original materials, if possible: 1. Place both foam end-caps on the unit. 2. Insert the unit into the box, and tape it shut. 3. In large letters, address the package for shipment to the nearest service location. Remember to include your return address and retain your shipping receipt. If you do not have the original packing materials: 1. Use box slightly larger than the typewriter. 2. Place the typewriter in a large plastic bag. 3. Place at lea
