ページ1に含まれる内容の要旨
CR9945
2 Band Auto Set Dual Alarm
Clock Radio
Please read this manual before use
ROBERTS
Sound for Generations
ページ2に含まれる内容の要旨
Controls (top) 2 10 4 6 8 shown with Snooze cover 12 1 3 5 7 9 11 open 1. Alarm 2 switch. 2. Alarm 1 switch. 3. Alarm 1 button. 4. Time zone button. 5. Down button. 6. Alarm mode button. 7. Year button. 8. Date button. 9. Up button. 10. Time button 11. Alarm 2 button 12. Waveband switch. 1
ページ3に含まれる内容の要旨
Controls (front) 14 16 18 13 15 17 13. Alarm indicator. 14. Tuning scale. 15. Day of week indicators. 16. Time/Date display. 17. Low battery indicator. 18. Tuning scale 19. Sleep button 20. On/off button. 20 19 If you need any further advice, please call our Technical Helpline on :- 2 020 8758 0338 (Mon-Fri)
ページ4に含まれる内容の要旨
Controls (left and right side) 21. Dimmer switch. 22 22. Volume control. 23. Tuning control. 21 23 3
ページ5に含まれる内容の要旨
Switching on 1. Place your clock radio on a flat surface. Plug the power cord into the wall socket and switch on. 2. After a few seconds the time, day and date will set automatically. Your clock radio is fitted with a long life back-up battery to maintain the factory set time, day and date. Your clock radio will automatically adjust for summer/winter time. See section on Backup battery on pages 12 and 13. Should the time require adjustment follow the procedure shown in the next section. Settin
ページ6に含まれる内容の要旨
1. To set year hold down both Year and Date buttons. The display will change to show year 2. Whilst holding down Year and Date buttons set correct year using Up or Down buttons. When the Year and Date buttons are released the display will revert to showing Day/Date 1. To set date hold down the Date button. 2. Whilst holding down the Date button set correct date using Up or Down buttons. 5
ページ7に含まれる内容の要旨
Setting alarm times Your alarm clock radio has two separate alarms which can be set to activate at different times. The alarms can be set to wake you by either the buzzer or the radio. Setting alarm 1 1. Press and hold down the button. 1 2. Whilst holding down the button press the Up or Down 1 buttons to set the alarm time. Release the buttons when the correct alarm time is reached. The clock uses a 12 hour display with an AM indicator. Ensure that the correct 12 hour cycle is selected. Set
ページ8に含まれる内容の要旨
Day/month display 1. Press and hold down the snooze button to display the day/month. 2. Release the snooze button to return to normal time display. Alarm modes Your clock radio has three alarm modes for each of the alarms. The alarm modes are Weekdays only - the alarm will switch on Monday to Friday. Weekends only - the alarm will switch on Saturday and Sunday only. Everyday - the alarm will switch on everyday. Weekday alarm 1.Press and hold down the or buttons (depending on 1 2 which alarm y
ページ9に含まれる内容の要旨
Weekend alarm 1. Press and hold down the or buttons (depending on which 1 2 alarm you wish to set mode for) 2. Whilst holding down or buttons repeatedly press and 1 2 release the Alarm mode button until Sat and Sun indicators are lit. Everyday alarm 1. Press and hold down the or buttons (depending on which 1 2 alarm you wish to set mode for) 2. Whilst holding down or buttons repeatedly press and 1 2 release the Alarm mode button until all the days of the week indicators are lit. If you
ページ10に含まれる内容の要旨
Checking alarm times 1. Press and hold down either or buttons. The display will 1 2 change from normal time to alarm time - days of the week indicators will show days of the week on which alarm will activate. Release the Alarm button to return to normal time Listening to the radio 1.Switch on the radio by pressing the On/Off button. Select the required waveband using the Waveband switch. 2.Tune in to the desired station using the Tuning control. Adjust volume using the Volume control. 3. The
ページ11に含まれる内容の要旨
Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. Set the Alarm 1 or Alarm 2 switch to the “Buzz” position. The Alarm indicator will light. 2. The buzzer alarm will sound every day at the preset time for 1 hour. To switch off the alarm until the next day press the On/Off button. To turn off the alarms permanently set the Alarm 1 or Alarm 2 switch to the 'Off' position. Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Al
ページ12に含まれる内容の要旨
Snooze control The radio or buzzer alarm can be silenced for 9 minutes by pressing the Snooze button. This sequence can be repeated whilst the alarm is sounding. Sleep timer You can program you clock radio to play the radio for up to 90 minutes and then switch off. 1. Press the Sleep button. The display will show the sleep time. 2. To increase or decrease the amount of time the radio will play before switching off, hold down the Sleep button and increase or decrease the sleep time using the Up o
ページ13に含まれる内容の要旨
Dimmer switch The Dimmer switch located on the left side of your clock radio will allow you to adjust the intensity of the clock display to suit room brightness. Backup battery As with all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as the length of time between the date your clock radio was manufactured and the date you plugged it in for the first time, determine the amount of time before battery replacement. During this initial storage
ページ14に含まれる内容の要旨
Changing the backup battery 1.Purchase a replacement lithium backup battery type CR2032 or equivalent. 2. Remove the fresh battery from its packaging so that it is ready to install. 3. Important. Maintain connection to AC mains supply during battery replacement. This will provide power whilst the original battery is removed. 4. Use a small screwdriver to remove the two small screws securing the battery holder on cabinet back. 5. Remove the battery holder from cabinet. 6. Remove old battery from
ページ15に含まれる内容の要旨
Time Zones Your clock radio is set up to UK time zone 00 GMT (UTC). Should you wish to take your clock radio to other countries the time zone will need to be reset. 1. Press and hold down the Time Zone button - the display will show the time zone currently selected e.g 00. 2. Whilst holding down the Time Zone button adjust the time zone using the Up or Down buttons. See following table for details of time zones and their Offsets relative to GMT. Zone Offset (Hours) Zone Offset (Hours) 00 GMT 1
ページ16に含まれる内容の要旨
Specifications Circuit Features Power Requirements Loudspeaker 8 ohms Mains AC 230 volts, 50Hz only Output power 250mW Back-up Battery 1 x CR2032 Lithium Aerial System FM Wire Aerial Frequency Coverage FM 87.5 - 108MHz MW Built-in Ferrite aerial MW 525 - 1610kHz The Company reserves the right to amend the specification without notice. 15
ページ17に含まれる内容の要旨
The wire coloured BLUE must be General (Earth) E connected to the terminal marked N Do not allow this unit to be exposed to water or steam. It is recommended or coloured BLACK. that the FM band be used wherever possible as better results in terms of (Live) Brown The wire coloured BROWN must be quality and freedom from interference will usually be obtained than on the 3 amp connected to the terminal marked L MW band. L or coloured RED. (Neutral) Blue Mains supply N The CR9945 will operate from a
ページ18に含まれる内容の要旨
Notes
ページ19に含まれる内容の要旨
Guarantee This radio is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge. The guarantee does not cover: 1. Damage resulting from incorrect use. 2. Consequential damage. 3. Product with removed or defaced serial numbers. Procedure: Any claim under this guara
ページ20に含まれる内容の要旨
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours) Issue 2
