ページ1に含まれる内容の要旨
4-192-726-31(1)
Network Media
Player
The software of this player may be updated in the future. To find out details on any
available updates, please visit:
For customers in European countries
http://support.sony-europe.com/
For customers in Australia
http://www.sony-asia.com/support/
To find out useful hints, tips and information about Sony products and services
z
please visit: www.sony-europe.com/myproduct/
Operating Instructions
SMP-N100
4-192-726-31(1)
Printed in Malaysia © 2010 Sony Corpora
ページ2に含まれる内容の要旨
by inappropriate waste handling of recycling of electrical and this product. The recycling of electronic equipment. WARNING materials will help to conserve natural resources. For more For all other batteries, please view detailed information about the section on how to remove the To reduce the risk of fire or electric recycling of this product, please battery from the product safely. shock, do not expose this apparatus contact your local Civic Office, Hand the battery over to the to rain
ページ3に含まれる内容の要旨
cables from the player when On cleaning you move the player. Clean the cabinet, panel, and Precautions controls with a soft cloth. Do not On power sources use any type of abrasive pad, This equipment has been tested � The player is not disconnected scouring powder or solvent such and found to comply with the from the AC power source as alcohol or benzine. limits set out in the EMC (mains) as long as it is Directive using a connection connected to the wall outlet, On replacement of par
ページ4に含まれる内容の要旨
IMPORTANT NOTICE Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on- screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this. If you have any questions or problems concerning your player, please consult your n
ページ5に含まれる内容の要旨
Notice for the customers in Italy Use of the RLAN network is governed: – with respect to private use, by the Legislative Decree of 1.8.2003, no. 259 (“Code of Electronic Communications”). In particular Article 104 indicates when the prior obtainment of a general authorization is required and Art. 105 indicates when free use is permitted; – with respect to the supply to the public of the RLAN access to telecom networks and services, by the Ministerial Decree of 28.5.2003, as amen
ページ6に含まれる内容の要旨
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Hookups and Settings Step 1: Preparing the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Step 2: Connecting
ページ7に含まれる内容の要旨
Guide to Parts and Controls Front panel A Power indicator D (USB) jack Lights up when the player is turned on. Connect a USB device to this jack. B Remote sensor E [/1 (on/standby) Turns on the player, or sets to standby C WLAN indicator mode. Lights up when using a wireless LAN. Rear panel A LINE OUT (R-AUDIO-L) jacks E HDMI OUT jack B LINE OUT (VIDEO) jack F COMPONENT VIDEO OUT (Y, PB, PR) jacks C DC IN 12V (AC adapter input) jack G LAN (100) terminal D DIGITAL OUT (OPTICAL) jack ,continued
ページ8に含まれる内容の要旨
A -TV- WIDE Remote Changes the screen format. -TV- INPUT The available functions of the remote differ Switches between TV and other input depending on the file or the situation. sources. -TV- [/1 (TV on/standby) Turns on the TV, or sets to standby mode. [/1 (on/standby) Turns on the player, or sets to standby mode. B Number buttons (0 - 9) Enters the title/chapter numbers, etc. VOL +/– Adjusts the TV volume. MUTING Mutes the sound. AUDIO Selects the language track when multi- lingual tracks a
ページ9に含まれる内容の要旨
Item Category Skips to the previous/next chapter, track, or file. REPLAY/ADVANCE Depending on the contents, these buttons may not function. m/M (fast reverse/fast forward) � Fast reverses/fast forwards when pressed during playback. Each time
ページ10に含まれる内容の要旨
Step 1: Preparing the Player Checking the supplied accessories Check that you have the following items: � Mains lead (1) � AC adapter (1) � Remote control (remote) (1) � R6 (size AA) batteries (2) Preparing the remote Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. Hookups and Settings 10
ページ11に含まれる内容の要旨
Hookups and Settings Step 2: Connecting the Player Do not connect the mains lead until you have made all the connections. Connecting to your TV Select one of the following connection methods according to the input jacks on your TV. Match the colour of the plug to that of the jack when connecting. High quality HDMI cable (not supplied) Audio/video cable (not supplied) Component video cable (not supplied) Audio/video cable (not supplied) Standard quality b Do not connect the player through a VCR
ページ12に含まれる内容の要旨
Connecting to your AV amplifier (receiver) Select one of the following connection methods according to the input jacks on your AV amplifier (receiver). When you select B, make the appropriate settings in the “Audio Settings” setup (page 20). HDMI cable (not supplied) HDMI cable (not supplied) Optical digital cable (not supplied) *1 t Set “Dolby Digital ” (page 20) *2 and “DTS ” (page 20). Audio/video cable (not supplied) *1 *2 Manufactured under license under U.S. Patent #’s: 5,451,942; 5,
ページ13に含まれる内容の要旨
Hookups and Settings 3 Turn on the TV, then switch the input selector on your TV so that the signal Step 3: Easy Setup from the player appears on your TV screen. When turned on for the first time Wait for a short while before the player turns on and starts “Easy Setup.” 1 Connect the supplied AC adapter and mains lead in the numeric order shown below. When removing them, do so in reverse order. to DC IN 12V 4 Perform “Easy Setup.” Follow the on-screen instructions to make the basic sett
ページ14に含まれる内容の要旨
Connecting to the Network Wired Setup Use a LAN cable to connect to the LAN (100) terminal on the player. LAN cable (not supplied) Broadband ADSL modem/ Internet router Cable modem To set the network settings Select “Network Settings,” “Internet Settings,” then “Wired Setup” (page 23), and follow the on-screen instructions to complete the setup. Wireless Setup Use a wireless LAN that is built into the player. LAN cable (not supplied) Wireless LAN ADSL modem/ Internet router* Cable modem *
ページ15に含まれる内容の要旨
Playback Playing via a Network Streaming BRAVIA Internet Video BRAVIA Internet Video serves as a gateway delivering the selected Internet content and a variety of on-demand entertainment straight to your player. 1 Prepare for BRAVIA Internet Video. Connect the player to a network (page 14). 2Select (Video), (Music), or (Photo) on the home menu using
ページ16に含まれる内容の要旨
Playing files on a DLNA server Playing from a USB You can play video/music/photo files on your Device home server, such as a DLNA certified PC by connecting the player to the home network. You can play video/music/photo files on the For playable files on a DLNA server, see connected USB device. “Playable types of files” (page 27). For playable USB devices, see “Playable types of files” (page 27). 1 Prepare for playing files on a DLNA server. 1 Connect the USB device to the USB � Connect
ページ17に含まれる内容の要旨
Playback (Music) only Available Options Items Details Add Registers music files in the Various settings and playback operations are Slideshow USB memory as slideshow available by pressing OPTIONS. The BGM background music (BGM). available items differ depending on the situation. (Photo) only Items Details Common options Slideshow Changes the slideshow Items Details Speed speed. Repeat Sets the repeat mode. Slideshow Sets the effect for Setting Effect slideshows. Favourites List Displays t
ページ18に含まれる内容の要旨
Using the Settings Displays Select (Setup) on the home menu when you need to change the settings of the player. The default settings are underlined. 1 Select (Setup) on the home menu using
ページ19に含まれる内容の要旨
Settings and Adjustments Network Update Screen Settings Select “OK” to update the player’s software TV Type via the network. 16:9 Select this when connecting to a wide-screen TV or a TV z with a wide mode function. � We recommend the network update every 2 4:3 Select this when connecting months or so. to a 4:3 screen TV without a � For information about update functions, visit the wide mode function. following website: For customers in European countries Screen Format http://support.sony-
ページ20に含まれる内容の要旨
YCbCr/RGB (HDMI) Auto Automatically detects the Audio Settings connected TV type, and switches to the matching Audio (HDMI) colour setting. Auto Normally select this. YCbCr (4:2:2) Outputs YCbCr 4:2:2 video Outputs audio signals signals. according to the status of the YCbCr (4:4:4) Outputs YCbCr 4:4:4 video connected HDMI device. signals. PCM Outputs PCM signals from RGB Outputs RGB video signals. the HDMI OUT jack. HDMI Deep Colour Output Dolby Digital Auto Normally select this. Downmix
