Airaid 300-765の取扱説明書

ページ1に含まれる内容の要旨

INSTALLATION INSTRUCTIONS
#300-765 Airaid Jr. Kit #300-965 Airaid MIT
2005-07 Dodge Dakota 4.7L V-8
2006-07 Mitsubishi Raider 4.7L V-8
Thank you for purchasing the Airaid Intake System. Please read the instruction manual carefully before
proceeding with the installation. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for
questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully
inspected and packaged

ページ2に含まれる内容の要旨

Installation Instructions. Read Me! 1. Disconnect negative battery 4. Remove the resonator and 7. Install the grommet into the cable. Loosen hose clamp on tube from the vehicle. hole in the MIT as shown. intake tube at the factory airbox end. For Jr. Kit, replace the factory air filter with the Airaid Premium Filter provided. 8. Carefully install the air temp 5. With the resonator turned sensor into

ページ3に含まれる内容の要旨

10. Double check your work to be certain that all nuts, bolts, and clamps are securely fastened. 11. Reconnect the negative battery cable. Before After!

ページ4に含まれる内容の要旨

Don’t Forget Your AIRAID Filter Tune-Up Kit! P/N 790-550 Instructions Revision Date: 07/16/08 Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 AiraidInfo@airaid.com www.airaid.com