ページ1に含まれる内容の要旨
USB-SUN
USB TO SUN ADAPTER
Installation Manual
MAN015 Rev Date 04/20/2006
ページ2に含まれる内容の要旨
COPYRIGHT Copyright © 2001, 2006 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202. CHANGES The material in this guide is for information only and is subject to change without notice. Network Tech
ページ3に含まれる内容の要旨
TABLE OF CONTENTS Introduction......................................................................................................................................................................1 Applications .....................................................................................................................................................................1 Installation ..................................................................................................
ページ4に含まれる内容の要旨
NTI USB-TO-SUN ADAPTER INTRODUCTION The NTI USB-SUN is a USB to SUN adapter that allows users to easily connect their SUN USB enabled CPU to an NTI Universal Multi-Platform (ST-xU) or Universal Matrix (ST-nXm-U) KVM Switch. Materials supplied: 1 NTI USB-SUN Adapter 1 USB-AB-0,5M-5T USB Type A male -to-USB Type B male cable Cable that may be required but is not supplied: Application NTI Cable Connect adapter to NTI Universal Switch SKTINT-xx-MM Legend
ページ5に含まれる内容の要旨
NTI USB-TO-SUN ADAPTER INSTALLATION USB-SUN Adapter to NTI KVM Switch When using the USB-SUN adapter to connect to an NTI KVM switch: 1. Connect one male 8 pin minDIN end of an SKTINT-xx-MM cable to a female 8 pin minDIN "Devices" input port on the NTI KVM switch being used (see Fig. 3). Switch the power ON to the KVM switch if it isn't already. 2. Connect the other male 8 pin miniDIN end of the SKTINT-xx-MM cable to the 8 pin miniDIN female port on the USB-SUN
ページ6に含まれる内容の要旨
NTI USB-TO-SUN ADAPTER USB Type A Male Connector Front View of USB-SUN To USB Type A port USB-AB-0.5M-5T SUN CPU With USB Port USB Type B Male Connector Figure 5- Connect USB-SUN to SUN CPU with USB port Legacy SUN Keyboard/Mouse to USB SUN Adapter When using the USB-SUN adapter to connect a SUN Keyboard and/or Mouse to a SUN CPU with a USB port: 1. Connect the 8 pin minDIN male connector of the SUN
ページ7に含まれる内容の要旨
NTI USB-TO-SUN ADAPTER TECHNICAL SPECIFICATIONS Mating face of a USB Type B Female Mating Face of a 8 pin miniDIN Female 21 8 6 7 4 5 3 3 4 2 1 PIN # SIGNAL PIN # SIGNAL 1 +VCC 1 GND 2 - DATA 2 GND 3 +DATA 3 +5 4 GND 4 MOUSE 5 KYBD RCV 6 KYBD XMT 7 PWRN 8 +5 WARRANTY INFORMATION The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network Technologies
