ページ1に含まれる内容の要旨
USER GUIDE
Aleratec
1:11 USB Copy Cruiser SA™
Part No. 330107
ページ2に含まれる内容の要旨
Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyright with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within or to make a backup copy. Copyright© 2010 Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www.aleratec.com ® Aleratec is a registered trademark a
ページ3に含まれる内容の要旨
Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy. If it is not installed in accordance with the manufacturer’s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
ページ4に含まれる内容の要旨
Safety Regulations WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only. www.aleratec.com
ページ5に含まれる内容の要旨
Table of Contents Introduction .......................................................................................1 Product Features .....................................................................................1 Key Items – 1:11 USB Copy Cruiser SA ................................................1 1:11 USB Copy Cruiser SA Display Panel .............................................2 Precautions .......................................................................................3 In
ページ6に含まれる内容の要旨
www.aleratec.com
ページ7に含まれる内容の要旨
Introduction Thank you for purchasing this 1:11 USB Copy Cruiser SA. Please read this User Guide thoroughly before using this product. • Page 2 shows the 1:11 USB Copy Cruiser SA Display Panel. Product Features • Stand Alone, no computer required. • Copy to, Compare, or Erase up to 11 drives simultaneously. • Backlighted LCD display shows function selected and job progress. • Compatible with popular drive capacities and formats. • Fast Synchronous and Asynchronous copying. Key Items – 1:11 US
ページ8に含まれる内容の要旨
Introduction 1:11 USB Copy Cruiser SA Display Panel 3 1 2 4 5 1 Display shows all functions and messages 2 ENT button is used to execute a selected function 3 ESC button is used to cancel a selected function 4 UP arrow is used to scroll up through functions or menus 5 DOWN arrow is used to scroll down through functions or menus 2 www.aleratec.com
ページ9に含まれる内容の要旨
Precautions Before installing your 1:11 USB Copy Cruiser SA, please read the following. Installation Avoid placing the 1:11 USB Copy Cruiser SA in a location subject to: • High humidity • High temperature • Excessive dust • Mechanical vibration • Direct sunlight • Electromagnetic radiation Operation Avoid exposing the duplicator to sudden changes in temperature as condensation may form on the lens inside the duplicator. Operating the duplicator immediately after a sudden increase in temperatur
ページ10に含まれる内容の要旨
Overview Main Menu This section provides a listing of the functions of the 1:11 USB Copy Cruiser SA. Detailed descriptions of each function are given in the next section. The functions are numbered for easy reference; these numbers are also used in the next section. USB Duplicator USB Duplicator OK ENT ESC 1. Copy 1. Copy ESC USB Duplicator USB Duplicator OK ENT ESC 2. Compare 2. Compare ESC USB Duplicator USB Duplicator OK ENT ESC 3. Copy+Compare 3. Copy+Compare ESC USB Duplicato
ページ11に含まれる内容の要旨
Overview Subfunctions of Main Menu Items 5, 6, and 7 The main menu “Information” function has 2 subfunctions. These are: 5.1 USB Info USB Duplicator USB Duplicator OK ENT ESC 5. Information 5. Information ESC 5.2 System Info The main menu “Utility” function has 6 subfunctions. These are: 6.1 Format FAT 6.2 Measure Speed 6.3 Media Check USB Duplicator USB Duplicator OK ENT ESC 6. Utility 6. Utility ESC 6.4 Quick Erase USB 6.5 Full Erase USB 6.6 System Update 6.7 Calc. Checksum www.alerate
ページ12に含まれる内容の要旨
Overview Subfunctions of Main Menu Items 5, 6, and 7 - continued The main menu “Setup” function has 8 subfunctions. These are: 7.1 Start-up Menu 7.2 Copy Area 7.3 Button Beep 7.4 Asyn Hold Time USB Duplicator USB Duplicator OK ENT ESC 7. Setup 7. Setup ESC 7.5 Ignore Size 7.6 Asynchronous Enable/Disable 7.7 Language 7.8 Working Mode Normal/Turbo 6 www.aleratec.com
ページ13に含まれる内容の要旨
Using the USB Duplicator Synchronous and Asynchronous The 1:11 USB Copy Cruiser SA supports two copying methods: • Synchronous • Asynchronous Synchronous Copying Synchronous Copying means that all flash drives begin copying together. Synchronous Copying is used when the source data is larger than the system buffer (256MB). You can check the size of the data source drive by inserting the source drive into the USB Duplicator and using the arrow keys to first select “Information”, then select
ページ14に含まれる内容の要旨
Using the USB Duplicator Main Menu Functions are selected with the arrow keys. The numbers correspond to the Function listing in the previous section. Copy This function makes USB flash copies. The duplicator auto detects and supports Synchronous, and Asynchronous methods of Copy. Synchronous Copying In Synchronous Copying all USB flash drives are copied simultaneously. Synchronous Copying is used when the source data is larger than the system buffer (256MB). 1. Load the source flash driv
ページ15に含まれる内容の要旨
Using the USB Duplicator Synchronous Copying - continued 4. Finish loading the blank target flash drives, then press the OK button on the display panel. 5. The LCD will display the status of the copying process. Total MBytes on source OK Copy 450M ENT ESC 15% 0:32 68M ESC Percent Complete Time elapsed MBytes copied 6. When Copy is complete LCD will display the following status: Total OK: 5 OK: 5 NG: 0 OK ENT ESC 1:03 OK: 5 NG: 0 ESC If the Copy fails, the
ページ16に含まれる内容の要旨
Using the USB Duplicator 2. Press the OK button on the display panel. The USB Duplicator will start to read the source content into the system’s buffer and immediately start copying any loaded target USB flash drives. OK USB(58M) 450M ENT ESC Reading... ESC 3. Load the blank target flash drives into the USB Duplicator. The LCD will display the number of blank media loaded and copying. OK Pass: 0 Working ENT ESC Fail: 0 3 ESC Note: When copying is in process the Green LED on the fron
ページ17に含まれる内容の要旨
Using the USB Duplicator Main Menu Compare This function will compare the finished target USB flash drives to the source USB flash drive after copying is complete. The USB Duplicator supports Compare in both Synchronous, and Asynchronous modes. Synchronous Compare In Synchronous Compare all USB flash drives are compared simultaneously. 1. When copying is complete and with the data source drive and the target USB flash drives still loaded in the USB Duplicator, use the UP or DOWN arrow to sc
ページ18に含まれる内容の要旨
Using the USB Duplicator 4. When Compare is complete the display will show the total, and the number that pass and fail. OK Total OK: 5 OK: 5 NG: 0 ENT ESC 1:03 OK: 5 NG: 0 ESC Asynchronous Compare Asynchronous Compare is used only when the source content is the same as or less than the system buffer (256MB). With the source content read into the systems buffer you can compare flash drives continuously by taking out the drive which has finished comparing, and
ページ19に含まれる内容の要旨
Using the USB Duplicator Asynchronous Compare - continued 4. As finished drives are removed, and new flash drives inserted, the display will show the number of comparisons completed and the number of USB flash drives still in the comparison process. If the Compare fails, the LCD will display the number of flash drives that failed and passed. OK Pass: 5 Working ENT ESC Fail: 0 2 ESC Note: During Asynchronous Compare you can use the UP and DOWN arrow keys to check each flash drives com
ページ20に含まれる内容の要旨
Using the USB Duplicator Main Menu Copy+Compare This function will Copy and Compare USB flash drives. The duplicator auto detects and supports Synchronous, and Asynchronous methods of Copy+Compare. Synchronous Copy+Compare In Synchronous Copy+Compare all USB flash drives are copied and compared simultaneously. Synchronous Copy+Compare is used when the source data is larger than the system buffer (256MB). 1. Load the source flash drive into the USB Duplicator. Use the UP or DOWN arrow to s