ページ1に含まれる内容の要旨
Operation/Reference Guide
®
Modero CV5
G4 Touch Panel
NXD-CV5
5” Modero Widescreen Video Touch Panels
Last Revised: 10/1/2008
Touch Panels
ページ2に含まれる内容の要旨
AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. � Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a pe
ページ3に含まれる内容の要旨
Table of Contents Table of Contents Introduction ........................................................................................................1 CV5 Specifications .................................................................................................... 2 CV5 Panels - Connector Layout................................................................................. 5 CV5 Touch Panel Accessories .............................................................................7 NXA
ページ4に含まれる内容の要旨
Table of Contents Step 4: Use the USB to Configure a Virtual Master (using NetLinx Studio)................... 38 Step 5: Confirm and View the current AMX USB device connections ........................... 40 Configuring a Wired Ethernet Connection.............................................................. 40 Step 1: Configure the Panel’s Wired IP Settings..................................................... 41 IP Settings section - Configuring a DHCP Address over Ethernet ....................
ページ5に含まれる内容の要旨
Table of Contents Sensor Setup................................................................................................................. 78 Making the most of the Automated Brightness Control feature (DIM Mode)............... 80 Other Settings ........................................................................................................ 81 Image Caching Page...................................................................................................... 82 Setting the image
ページ6に含まれる内容の要旨
Table of Contents Input mask character types ......................................................................................... 148 Input mask ranges ....................................................................................................... 149 Input mask next field characters.................................................................................. 149 Input mask operations...............................................................................................
ページ7に含まれる内容の要旨
Introduction Introduction The NXD-CV5 5" Modero Widescreen Color Video Touch Panels (FIG. 1) are the industry’s first widescreen mini-touch panels and are available only through AMX. NXD-CV5 (front view) (FG2261) FIG. 1 Sample 5" Video Touch Panel This is the first 5" diagonal Widescreen Color Active video-capable touch panel in the control and automation industry. This Color Video (CV) panel displays NTSC/MPAL/PAL/SECAM video formats within variable sized windows up to 800 x 480. It in
ページ8に含まれる内容の要旨
Introduction CV5 panels feature programmable firmware that can be upgraded via either the Ethernet port or the mini-USB port. NXD-CV5 (shown with Button Trim Ring installed) Programmable Programmable Buttons/LEDs Buttons/LED (1-3) (4-6) Sleep/Setup Access Button FIG. 2 NXD-CV5 (front view showing default Trim Ring) CV5 Specifications The following table outlines the specifications for the 5" Widescreen Modero panel. Specifications for 5" Widescreen Video Touch Panel Dimensions (HWD): �NXA
ページ9に含まれる内容の要旨
Introduction Specifications for 5" Widescreen Video Touch Panel (Cont.) Viewing Angles: � 90° total viewing angle: - Horizontal: + 45° (left and right from center) IR Reception Angle: � Horizontal: + 25° (left and right from center) �Vertical: + 15° (up and down from center) Supported Audio Sample � 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz, Rates: 11025Hz, and 8000Hz. Front Panel Components: Light sensor: � Photosensitive light detector for automatic adjustment of the pan
ページ10に含まれる内容の要旨
Introduction Specifications for 5" Widescreen Video Touch Panel (Cont.) Side Panel Components (Cont.): Mini-USB connector: � 5-pin Mini-USB connector used for programming, firmware update, and touch panel file transfer between the PC and the target panel. Note: When connecting the panel to PC using a CC-USB (or compatible) cable, be sure to power the panel On before attempting to connect the USB cable from the PC to the mini-USB port on the panel. Refer to the Configuring and Using USB wit
ページ11に含まれる内容の要旨
Introduction Specifications for 5" Widescreen Video Touch Panel (Cont.) Other AMX Equipment � NXA-BEZ-5NB, Bezel Kit without buttons for Modero 5” Widescreen Wall/ (Cont.): Flush Mount Touch Panel (NXD-CV5) - NXA-BEZ-5NB-BG, Beige Faceplate without buttons (FG2261-42) - NXA-BEZ-5NB-BL, Black Faceplate without buttons (FG2261-40) - NXA-BEZ-5NB-LA, Light Almond Faceplate without buttons (FG2261-43) - NXA-BEZ-5NB-WH, White Faceplate without buttons (FG2261-41) � NXA-CV5AM, Modero 5" Angle Mount Ki
ページ12に含まれる内容の要旨
Introduction 6 5" Modero Widescreen Touch Panel
ページ13に含まれる内容の要旨
CV5 Touch Panel Accessories CV5 Touch Panel Accessories The following section outlines and describes both the included accessories and other AMX equipment available for these touch panels. NXA-AVB/ETHERNET Breakout Box (FG2254-10) The NXA-AVB/ETHERNET Breakout Box (FIG. 4) is sold as a separate accessory to the CV5 panel and does not come as part of a Kit configuration for this panel. This box facilitates the installation and distribution of video, data, and audio to Modero touch panels locat
ページ14に含まれる内容の要旨
CV5 Touch Panel Accessories NXA-AVB/ETHERNET Specifications (Cont.) Rear Components: � 6-pin 3.5 mm Phoenix connector for in-bound (left/right channel) audio � 4-pin 3.5 mm Phoenix connector for out-bound (from microphone) audio � BNC connector (female) for Composite or Chroma (for video-capable panels only) � BNC connector (female) for luminance (for video-capable panels only) � RJ-45 connector for Ethernet input from the control system � 2-pin 3.5 mm Phoenix connector for in-bound power Incl
ページ15に含まれる内容の要旨
NXA-AVB/ETHERNET Breakout Box CV5 Touch Panel Accessories The breakout box unit can be mounted on either a horizontal flat surface or into an equipment rack (by removing the front screws and attaching it to an optional AC-RK). The power supply being used on the NXA-AVB/ETHERNET is dependant on the power requirements of the target touch panel. Use a standard CAT5 Ethernet cable to provide both communication and 10/100 network connectivity between the panel, NXA-AVB/ETHERNET, NetLinx Master, an
ページ16に含まれる内容の要旨
CV5 Touch Panel Accessories �PWR: 2-pin mini-Phoenix connector that connects to a 12 VDC-compliant power supply. This port can be used to provide power to a Modero panel by sending it through the NXA-AVB/ETHERNET (rear power connector through to the front power connector). Wiring the NXA-AVB/ETHERNET for Unbalanced Audio Most domestic audio equipment has unbalanced audio inputs and outputs. This means that the audio output (left, right, or mono) appears on a single wire, and is referenced to
ページ17に含まれる内容の要旨
CV5 Touch Panel Accessories The 3 wires used in a typical XLR lead are often referred to as Ground, Live (Hot) and Return (Cold). "Live" and "Return" carry the "in-phase" and "out-of-phase" versions of the audio respectively. The pins of the XLR plug/socket are as follows: � X = Ground � L = Live (Hot) � R = Return (Cold) When connecting the MIC OUT connector to a balanced audio input (FIG. 9), use all three audio terminals (+, -, and GND), then connect the "+" terminal to the "live" sig
ページ18に含まれる内容の要旨
CV5 Touch Panel Accessories 12 5" Modero Widescreen Touch Panel
ページ19に含まれる内容の要旨
Installation Installation This NXD panels can be installed into either a pre-wall surface (using a CB-TP5 rough-in/wallbox) or a solid surface (using either solid surface or drywall screws). Unpacking the Panel 1. Inspect and confirm the contents of the shipment box to verify you have all specified parts. Refer to the Specifications for 5" Widescreen Video Touch Panel section on page 2 for more information about included accessories and other AMX equipment. 2. Carefully remove the panel from
ページ20に含まれる内容の要旨
Installation CV5 Panel/enclosure B Button latch Trim Ring Latches Button removal (showing the internal surface of Faceplate) Default Button Trim Ring (with button openings) Faceplate (outside surface shown) FIG. 10 Removing the default Button Trim Ring No-Button Trim Ring Hollow button openings Faceplate (outer surface shown) FIG. 11 Inserting the No-Button Trim Ring 8. Firmly press down around the No-Button Trim Ring until all of the latches are securely inserted into their openings on the F
