Snapper LT180H33 IBV user manual

User manual for the device Snapper LT180H33 IBV

Device: Snapper LT180H33 IBV
Category: Lawn Mower
Manufacturer: Snapper
Size: 1.63 MB
Added : 2/22/2014
Number of pages: 44
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Snapper LT180H33 IBV. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Snapper LT180H33 IBV.

For your convenience

If looking through the Snapper LT180H33 IBV user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Snapper LT180H33 IBV on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Snapper LT180H33 IBV to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Snapper LT180H33 IBV User manual - Online PDF
Advertisement
« Page 1 of 44 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Snapper LT180H33 IBV but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Snapper LT180H33 IBV. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Safety Instructions & Operator’s Manual for

LAWN TRACTOR
HYDROSTATIC DRIVE
SERIES I



MODELS
LT180H33IBV
LT180H38IBV









MODEL NUMBER EXPLANATION

LT 180 H 38 I B V

MODEL DESIGNATION
ENGINE HP * ENGINE TYPE
DRIVE SYSTEM TYPE ENGINE MODEL
CUTTING WIDTH SERIES DESIGNATION

LT – Lawn Tractor Model Designation 33 – 33” Cutting Width Mower
180 – 18.0 HP Engine Horse Power 38 – 38” Cutting Width Mower
H – Hydrostatic Transmission I – Series Designation
B –

Summary of the content on the page No. 2

IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind

Summary of the content on the page No. 3

IMPORTANT SAFETY INSTRUCTIONS PREPARATION OPERATION (Continued From Previous Page) 1. Mount and dismount machine from left side. 6. Check the area to be mowed and remove all objects Keep clear of discharge opening at all times. such as toys, wire, rocks, limbs and other objects 2. Start engine from operator's seat, if possible. that could cause injury if thrown by blade or Make sure blades are OFF and parking brake is interfere with mowing. set. 7. Keep people and pets out of mo

Summary of the content on the page No. 4

IMPORTANT SAFETY INSTRUCTIONS TOWING MAINTENANCE 1. Tow only with a machine that has a hitch (Continued From Previous Column) 15. Maintain or replace safety and instruction labels designed for towing. DO NOT attach towed as necessary. equipment except at the hitch point. 16. Use only genuine SNAPPER replacement parts 2. Follow the manufacturer’s recommendation for to assure that original standards are weight limits for towed equipment and towing maintained. on slopes. 3. DO

Summary of the content on the page No. 5

TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......... 2 - 4 SECTION 4 - ADJUSTMENTS & REPAIR............................18-33 TABLE OF CONTENTS .........................................5 Engine Adjustments & Repair ......................... 18 Mower Deck & Component Adjustments ....... 18 SECTION 1 - FAMILIARIZATION ..........................6 Blade Brake Adjustment .................................. 18 Components .......................................................6 33” D

Summary of the content on the page No. 6

Section 1 - FAMILIARIZATION CONTROL PANEL PARK BRAKE CHOKE FAST LEVER SLOW CLUTCH/BRAKE DOWN PEDAL KEY CUTTING HEIGHT OPERATOR’S ENGINE SPEED ADJUSTMENT LEVER SEAT CONTROL STEERING SEAT WHEEL ADJUSTMENT KNOB DASHBOARD CONTROLS SPEED CONTROL FUEL TANK LEVER (UNDER HOOD) BATTERY (UNDER SEAT) HOOD OVERRIDE LEVER HEADLIGHTS BLADE ENGAGEMENT LEVER DISCHARGE DEFLECTOR ENGINE MOWING D

Summary of the content on the page No. 7

Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as FUEL TANK required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires. 2.1.2. Check guards, deflectors and covers to make sure all are in place and securely tightened. If guards are missing or damaged, replace BEFORE using mower. TIGHTEN CAP AFTER 2.1.3. Check

Summary of the content on the page No. 8

Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 5. Choke engine for cold starting by moving engine 2.3.1. STARTING ENGINE speed control to "CHOKE" position. Little or no choking will be needed when restarting a warm 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going engine. Insert key in switch. Turn key to "START" position to crank engine and hold until engine starts, to mow is clear of people, children and pets. Take not

Summary of the content on the page No. 9

Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (continued) 2.4 STOPPING ENGINE, BLADE, & WHEEL DRIVE 2.3.2. STARTING WHEEL DRIVE 2.4.1. STOPPING ENGINE 1. Shift speed control lever to neutral. 1. Stop engine by turning key to the "OFF" 2. Start engine. Refer to Section “STARTING position. See Figure 2.9. ENGINE”. 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion. See RUN OFF START Figure 2.

Summary of the content on the page No. 10

Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.5. RELEASING PARK BRAKE 2.4.3. STOPPING MOWER BLADE 1. Fully depress clutch/brake pedal. Move park brake 1. Stop mower blade by moving blade engagement lever down to the "OFF" position. See Figure 2.11. lever “DOWN” to release park brake. Release clutch/brake pedal. See Figure 2.13. PARK BRAKE BLADE LEVER CLUTCH/BRAKE ENGAGEMENT PEDAL LEVER OFF FULLY DEPRESS FIGURE 2.11 CLUTCH/BRAKE PEDAL WARNING Once blade

Summary of the content on the page No. 11

Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.15. WARNING PULL ROLL RELEASE DO NOT disengage the hydro transmission and coast CONTROL ALL THE WAY OUT TO DISENGAGE down slopes. DO NOT use Roll Release Control to HYDRO TRANSMISSION disengage the hydro transmissi

Summary of the content on the page No. 12

Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM 2.7.1. Reverse Lockout Mechanism Override 1. Stop machine. Stop blades. Data indicates that tragic back-over accidents occur 2. Depress and hold Override Lever. each year. These accidents usually involve 3. Raise blade engagement lever to "ON". unsupervised children. Many times these children have 4. Release override lever. been given rides on the machine and have been trained to view this potentially dangerous piece

Summary of the content on the page No. 13

Section 3 - MAINTENANCE 3.1 INTRODUCTION 4. Check blade for straightness. Refer to Section To retain the quality of the Tractor, use genuine “ADJUSTING MOWER BLADE”. SNAPPER replacement parts only. Contact a local 5. Check torque of blade mounting bolts. Torque to: SNAPPER dealer for parts and service assistance. For 33” deck – 30 to 40 ft. lbs. See Figure 3.2. the correct part or information for a particular Tractor, 38” deck – 70 to 80 ft. lbs. See Figure 3.3. always me

Summary of the content on the page No. 14

Section 3 - MAINTENANCE 3.2.3. CHECK MOWER BLADE (Continued) 2. Change air filter. Pull up and rotate the air cleaner latch to remove cleaner cover. See Figure 3.5. IMPORTANT: When cover is removed, you are viewing the carburetor side of the air filter, which will appear clean. Remove filter and pre-cleaner for inspection. AIR CLEANER LATCH TORQUE 38” BLADES TO 70 TO 80 FT. LBS. FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. With engine "OFF", m

Summary of the content on the page No. 15

Section 3 - MAINTENANCE 3.3.2. MOWER COMPONENTS 3. Clutch/Brake Pivot 1. Check deck drive belt for proper tension. Refer The clutch/brake pivot is located on the left hand underside of the tractor and is lubricated with one to Section “CHECK DECK DRIVE BELT”. 2. Check blades for sharpness, wear, damage and shot of general purpose grease. See Figure 3.8. torque. Refer to Section “MOWER BLADE REPLACEMENT”. CLUTCH/BRAKE 3. Check mower deck for proper levelness. Refer PIVOT LUBRICATION

Summary of the content on the page No. 16

Section 3 - MAINTENANCE 6. Steering Drag Link Lubricate both ends of steering drag link with a small amount of SAE30 oil. See Figure 3.10. LUBRICATE COMPONENTS ON UNDERSIDE OF TRACTOR DRAG LINK LUBRICATION POINT BLADE ENGAGEMENT LEVER FIGURE 3.10 FIGURE 3.12 3.3.4. TRACTOR LUBRICATION (Continued From Previous Page) 9. Park Brake Lever 7. Steering Tie Rod Using general purpose grease, lubricate the park Lubricate both ends of steering tie rod with a small brake lev

Summary of the content on the page No. 17

Section 3 - MAINTENANCE 3.4 SERVICE - ANNUALLY 3.4.3. SPARK PLUG 3.4.2. FUEL FILTER Remove and replace engine spark plug. Refer to engine owner's manual for correct replacement plug 1. Service fuel filter as instructed below, on COLD ENGINE ONLY! and gap specifications. 3.4.4. HYDROSTATIC TRANSMISSION OIL NOTE: It may be necessary to drain the fuel tank before removing fuel filter to prevent spillage of gasoline. The hydrostatic transmission does not require maintenance. If any pro

Summary of the content on the page No. 18

Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool. 4.1 ENGINE ADJUSTMENTS & REPAIR Refer to the engine owner's manual for those adjustments and/or repairs that can be

Summary of the content on the page No. 19

Section 4 - ADJUSTMENT & REPAIR 8. (33" Deck) To adjust tension, remove extension rod WARNING mounting bolt and nut. See Figure 4.4. DO NOT attempt any adjustments, maintenance or 9. Move extension rod to next hole towards rear of service with the engine or blade running. STOP blade. deck and secure with mounting bolt and nut. STOP engine. Set brake. Remove key. Remove spark 10. Measure extension spring with blade engagement plug wire from spark plug and secure wire away from lever

Summary of the content on the page No. 20

Section 4 - ADJUSTMENT & REPAIR 4.2.4. ADJUSTING MOWER BLADE – 33” DECK 4.2.5. 33" DECK LEVEL ADJUSTMENT (SIDE TO SIDE) (Continued from previous page) NOTE: Adjust tire pressure, 12 P.S.I. front and rear, before adjusting deck. 1. Move tractor to a firm, level surface. 2. Turn engine "OFF". Remove key. 3. Place a piece of angle iron under center rear of deck. 4. Remove hair pins and washers securing rear of deck MEASURE THE DISTANCE to sector plates. See Figure 4.7. BETWEEN DECK L


Alternative user manuals
# User manual Category Download
1 Snapper "MR" SERIES 17 EMRP216517B User manual Lawn Mower 22
2 Snapper "MR" SERIES 17 MR216017BV User manual Lawn Mower 5
3 Snapper "MR" SERIES 17 MR216517B User manual Lawn Mower 8
4 Snapper "MR" SERIES 17 MR216017B User manual Lawn Mower 1
5 Snapper "MR" SERIES 17 MRP216017B User manual Lawn Mower 3
6 Snapper "MR" SERIES 17 WMR216517B User manual Lawn Mower 0
7 Snapper "MR" SERIES 17 WMR216017B User manual Lawn Mower 1
8 Snapper "MR" SERIES 17 MRP216517B User manual Lawn Mower 2
9 Snapper "MR" SERIES 17 WMR216017BV User manual Lawn Mower 1
10 Snapper "MR" SERIES 17 MRP216017BV User manual Lawn Mower 1
11 Snapper "MR" SERIES 17 WMRP216017B User manual Lawn Mower 0
12 Snapper "MR" SERIES 17 WMRP216517B User manual Lawn Mower 1
13 Snapper 0 User manual Lawn Mower 0
14 Snapper 0-7001 User manual Lawn Mower 2
15 Snapper 06124 User manual Lawn Mower 0
16 2Wire 7-1/4 Inch Circular Saw 94245 User manual Lawn Mower 3
17 Agilent Technologies E4371A User manual Lawn Mower 0
18 Agilent Technologies E4370A User manual Lawn Mower 3
19 Agilent Technologies E4374A User manual Lawn Mower 1
20 Adams 22 User manual Lawn Mower 1