Agilent Technologies E4370A user manual

User manual for the device Agilent Technologies E4370A

Device: Agilent Technologies E4370A
Category: Lawn Mower
Manufacturer: Agilent Technologies
Size: 0.86 MB
Added : 10/4/2014
Number of pages: 141
Print the manual


How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Agilent Technologies E4370A. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Agilent Technologies E4370A.

For your convenience

If looking through the Agilent Technologies E4370A user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Agilent Technologies E4370A on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Agilent Technologies E4370A to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Agilent Technologies E4370A User manual - Online PDF

Explore the detailed user manual for Agilent Technologies remarkable creation, Model E4370A. Gain valuable insights and instructions to maximize your device's capabilities and optimize your user experience. Uncover the full potential of your Agilent Technologies E4370A device through this comprehensive user manual, offering step-by-step guidance and expert tips for effortless operation and enjoyment.

« Page 1 of 141 »
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Agilent Technologies E4370A but the selected pages only. paper.


Below you will find previews of the content of the user manuals presented on the following pages to Agilent Technologies E4370A. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Multi-Cell Charger/Discharger
Agilent Model E4370A
Powerbus Load
Agilent Model E4371A
64-Channel Charger/Discharger
Agilent Model E4374A

Agilent Part No. 5964-8138
Microfiche No. 5964-8139
September 2000

Summary of the content on the page No. 2

Warranty Information CERTIFICATION Agilent Technologies certifies that this product met its published specifications at time of shipment from the factory. further certifies that its calibration measurements are traceable to the United States National Bureau of Standards, to the extent allowed by the Bureau’s calibration facility, and to the calibration facilities of other International Standards Organization members. WARRANTY This Agilent Technologies hardware product is warranted against defect

Summary of the content on the page No. 3

Safety Summary The following general safety precautions must be observed during all phases of operation of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability for the customer’s failure to comply with these requirements. GENERAL This product is a Safety Class 1 instrument (provided with a protective earth termina

Summary of the content on the page No. 4

Safety Symbols SAFETY SYMBOLS Direct current Caution, risk of electric shock Earth (ground) terminal Caution, hot surface Protective earth (ground) terminal Caution (Refer to accompanying documents.) (Intended for connection to external protective conductor.) On - power (Indicates connection to the On - equipment (Identifies the on condition of ac mains.) part of the equipment.) Off - power (Indicates disconnection Off - equipment (Identifies the off condition of from the ac mains.) part of th

Summary of the content on the page No. 5

Table of Contents Warranty Information 2 Safety Summary 3 Document Scope 4 Notice 4 Table of Contents 5 1 - GENERAL INFORMATION 9 Agilent MCCD System Capabilities 9 Basic Functions 10 Additional Features 10 Hardware Description 10 Agilent E4370A/E4374A MCCD 10 Agilent E4371A Powerbus Load 12 External Power Source 13 Multiple Agilent MCCD Configuration 14 Measurement Capability 15 Voltage Measurements 15 Current Measurements 15 Capacity Measurements 16 Cell Resistance 16 Probe Resistance 17 Data

Summary of the content on the page No. 6

3 - CONFIGURATION 37 Configuring the LAN 37 1. Configure the HyperTerminal program 37 2. Connect the Agilent E4370A MCCD to the COM port on the PC 38 3. Fill Out the Agilent MCCD Configuration Screens 38 Network Configuration 39 Identification Configuration 40 Miscellaneous Configuration 41 Configuring the Digital I/O 41 Mixed Configuration Example 44 Accessing Calibration 44 4 - AGILENT MCCD USER INTERFACE 45 Description 45 PC Requirements 45 Browser Settings 45 Security 45 Localization 46 Acce

Summary of the content on the page No. 7

cfCalTransfer 71 cfClose 71 cfDeleteGroup 71 cfGetCellStatus 72 cfGetCellStatusString 72 cfGetCurrent 72 cfGetDigitalConfig 73 cfGetDigitalPort 73 cfGetGroups 73 cfGetInstIdentify 74 cfGetInstStatus 74 cfGetMeasLogInterval 75 cfGetOutputConfig 75 cfGetOutputProbeTest 75 cfGetOutputState 76 cfGetRunState 76 cfGetSense 76 cfGetSenseProbeTest 77 cfGetSeqStep 77 cfGetSeqTest 77 cfGetSeqTestAnd 78 cfGetSeqTime 78 cfGetSerialConfig 78 cfGetSerialStatus 78 cfGetShutdownDelay 79 cfGetShutdownMode 79 cfG

Summary of the content on the page No. 8

cfSetDigitalPort 92 cfSetErrorFunction 92 cfSetGroup 93 cfSetMeasLogInterval 93 cfSetOutputConfig 93 cfSetOutputProbeTest 94 cfSetOutputState 94 cfSetSense 95 cfSetSenseProbeTest 95 cfSetSeqStep 95 cfSetSeqTest 97 cfSetSeqTestAnd 99 cfSetSerialConfig 99 cfSetServerTimeout 99 cfSetShutdownDelay 100 cfSetShutdownMode 100 cfSetTimeout 100 cfSetTrigSource 100 cfSetVoltage 101 cfShutdown 101 cfStateDelete 101 cfStateList 102 cfStateRecall 102 cfStateSave 102 cfTrigger 102 cfWriteSerial 103 7 - C PROG

Summary of the content on the page No. 9

1 General Information Agilent MCCD System Capabilities The Agilent Multi-Cell Charger/Discharger (MCCD) System has been designed to address the unique requirements and needs of lithium-ion cell manufacturing. The Agilent MCCD System can accurately charge, discharge, and measure lithium ion cells. It consists of an Agilent E4370A Multi-Cell Charger/Discharger mainframe with up to four Agilent E4374A 64-Channel Charger/Discharger cards. When fully loaded each mainframe has 256 input/output channe

Summary of the content on the page No. 10

1 - General Information Basic Functions ♦ Charger – The Agilent MCCD can deliver accurately controlled current and voltage into a cell for proper forming. Each cell is independently paced through the cell forming sequence. This means that some cells can be charging and others discharging if they are at different points in the sequence. ♦ Discharger – The Agilent MCCD can draw accurately controlled current from a cell for both forming and capacity measurement. ♦ Measurement – The Agilent MCCD can

Summary of the content on the page No. 11

General Information - 1 E4370A E4374A CHARGER/DISCHARGER 1 3 5 7 MULTICELL CHARGER/DISCHARGER 1 Ready Fault 2 4 6 8 E4374A CHARGER/DISCHARGER 1 3 5 7 SYSTEM 2 Power Ready Fault Ready Active 2 4 6 8 FAULT E4374A CHARGER/DISCHARGER 1 3 5 7 External Internal 3 Ready Fault 2 4 6 8 E4374A CHARGER/DISCHARGER 1 3 5 7 LINE 4 On Ready Fault Off 2 4 6 8 LINE Applies and removes ac power from the Agilent MCCD. Relays inside the unit that connect the power bus are disengaged when power is off, so the power

Summary of the content on the page No. 12

1 - General Information B C D E A F RS-232 RS-232 PORT A PORT B G H J K A + and - Power bus connectors G RS-232 connectors (ports A and B) H AC line connection (a universal AC input for line (- bus bar is connected to chassis ground) B voltages from 87 Vac to 250 Vac, 50/60 Hz.) Calibration status LEDs C J Auxiliary output connection Configuration switches D Transfer Calibration switch K Calibration port E Digital I/O connectors F LAN connection Figure 1-3. Agilent E4370A/E4374A MCCD Rear Pane

Summary of the content on the page No. 13

E4372A General Information - 1 POWERBUS LOAD Figure 1-4. Agilent E4371A Powerbus Load Front Panel Figure 1-5. Agilent E4371A Powerbus Load Rear Panel External Power Source For the charging cycle, each Agilent MCCD mainframe requires an external dc power source to power the cells. The external power source connects to the power bus terminals on the back of the mainframe. It must be rated at 24 volts and be able to source 125% of the required cell charging power. For example, to provide the cell c

Summary of the content on the page No. 14

1 - General Information Additionally, a single supply of sufficient amperage may be shared among multiple mainframes that are connected to a common power bus - provided that the total current can be supplied while meeting the voltage specification at the power bus terminals at the rear of the Agilent MCCD. NOTE: If the external dc power source has an overvoltage protection circuit, it must be set higher than 30 volts to avoid the possibility of shutting itself down during the discharge cycle. Mu

Summary of the content on the page No. 15

General Information - 1 The maximum power required for such a system is 25.6 kilowatts. A single power source of sufficient total amperage may be shared among multiple mainframes connected to the power bus, provided the total current can be provided while meeting the 24 volt dc input requirement at the power bus terminals on the rear of each mainframe. Multiple paralleled 24 volt dc sources may be used in place of the single 24 volt, 25.6 kilowatt dc source shown in the figure. To achieve improv

Summary of the content on the page No. 16

1 - General Information Capacity Measurements Amp-hour capacity - the Agilent MCCD determines amp-hour cell capacity by making calculations based on continuous current measurements. During charge, every time the Agilent MCCD makes a measurement, it calculates the actual incremental amp-hours put into the cell during each measurement interval by multiplying the measured current times the measurement interval. It then adds this incremental amount to the accumulated amp-hour value to determine the

Summary of the content on the page No. 17

General Information - 1 The Agilent MCCD measures the dc cell resistance by first disconnecting the charge/discharge circuits from all cells. A pulse generator in the Agilent MCCD mainframe is connected sequentially to each cell. The pulse generator passes a short-duration pulsed current through each cell while the measurement system digitizes the cell voltage and current using a high accuracy, high-speed A/D converter. Using proprietary algorithms to calculate the change in voltage relative to

Summary of the content on the page No. 18

1 - General Information The comparison test to see if the ΔV, ΔI, and Δt values have been exceeded is done at the end of each measurement interval, so the fastest rate at which records can be written into the data buffer is the measurement rate of the Agilent MCCD. Any combination of events can be specified, so that a data log record is written into the data buffer when any of the events occur. Each record in the data buffer contains the following information: status (including CV/CC and step nu

Summary of the content on the page No. 19

General Information - 1 External Digital I/O Protection Functions The Digital I/O subsystem on the Agilent MCCD can be configured to provide protection capabilities. These digital I/O signals operate independently, so that if there is a problem with the computer or the LAN connection the protection functions of the Agilent MCCD are not compromised. As explained in chapter 2, the 16 digital I/O signals can be individually configured to provide one of the following protection functions: External

Summary of the content on the page No. 20

1 - General Information Application Programming Interface (API) The application programming interface runs under Windows 95 or Windows NT 4.0 using supplied C- language function calls. These function calls are documented in chapters 5 and 6, and provide the most comprehensive method of controlling the Agilent MCCD. The API interface is the preferred method of control when the Agilent MCCD is connected to a remote computer as part of an automated manufacturing process. Web Accessible Agilent MCCD

Alternative user manuals
# User manual Category Download
1 Agilent Technologies E4371A User manual Lawn Mower 0
2 Agilent Technologies E4374A User manual Lawn Mower 1
3 Agilent Technologies E4370A User manual Video Gaming Accessories 0
4 2Wire 7-1/4 Inch Circular Saw 94245 User manual Lawn Mower 3
5 Agilent Technologies E4371A User manual Lawn Mower 0
6 Agilent Technologies E4374A User manual Lawn Mower 1
7 Adams 22 User manual Lawn Mower 1
8 Agri-Fab 45-0438 User manual Lawn Mower 0
9 Agri-Fab 690 User manual Lawn Mower 0
10 Agri-Fab 45-0361 User manual Lawn Mower 0
11 Agri-Fab 45-0362 User manual Lawn Mower 0
12 Agri-Fab Box Scraper 45-0358 User manual Lawn Mower 0
13 Agri-Fab 45-03072 User manual Lawn Mower 0
14 Agri-Fab 45-03612 User manual Lawn Mower 1
15 AL-KO 426 036 User manual Lawn Mower 8