Summary of the content on the page No. 1
READ ME FIRST
Windows® NT
®
*DSL Equipment Installation Guide:
Alcatel Speed Touch PC®
*Digital Subscriber Line
Part Number: AlcatelPCNT02
Version 1.2
©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 2
Table of Contents Follow Steps 1 through 7 to complete the DSL Equipment Installation Step 1: Verify Your System Requirements and Documents 2 Step 2: Verify the Contents of Your DSL Equipment Kit 3 Step 3: Install a Telephone Filter on Every Telephone Line 4 Step 4: Select Modem and Minimum Requirements Check 8 Step 5: Installing the Alcatel Speed Touch PC® 12 Step 6: Finish Configuring your System 19 Step 7: Follow the Instructions Provided Separately
Summary of the content on the page No. 3
Step 1: Verify Your System Requirements and Documents This Installation Guide is for Windows® NT users only. The SBC Express software will ensure that you meet the following minimum requirements. You will not be able to complete the installation without meeting these requirements. • PC with a Pentium-class processor, CD-ROM Drive, 166 MHz, 25 Mb free disk space, 32 Mb RAM and any one of the following:: • An available PCI slot Other items you may need during the installation p
Summary of the content on the page No. 4
Step 2: Verify the Contents of Your DSL Equipment Kit Your DSL Equipment Kit Contains: A: This Installation Guide and the SBC Express CD. B: 1 Alcatel Speed Touch PC® Internal Modem C: 1 Filter Pack containing: 5 in-line filters, 1 wall-mount filter, 1 two-way adapter, and 1 data cable. Note: Internet Software and/or instructions may be provided in this box or separately by your Internet Service Provider. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Wind
Summary of the content on the page No. 5
Step 3: Install a Telephone Filter on Every Telephone Line 3-1 Determine how many telephone jacks in your home share the same telephone number with the activated DSL. 1) Locate the phone jack where you want to connect your DSL 2) Insert the 2-way adapter in the phone jack 3) Connect a filter to one side of the 2-way adapter Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 4 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 6
4) If you have a phone, fax machine, analog modem or other phone device at this location, connect it to the filter 5) Connect the data cable that will go to your DSL modem to the unfiltered side of the 2-way adapter To the DSL modem Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 5 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 7
3-2 Install a filter on all other phones and phone devices Why do I need a filter on all my other phones and phone devices? Converting your regular phone line into a high-speed Digital Subscriber Line (DSL) can cause audible noise (high pitched tones and static) when you talk on the phone. You need to install a filter on every telephone or device that shares the same phone number as your DSL line to eliminate this noise. Answering machines Other phones Caller ID boxes filter filt
Summary of the content on the page No. 8
3-3 Other filters you may encounter in your DSL Equipment Kit. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 7 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 9
Step 4: Select Modem and Minimum Requirements Check 4-1 Insert the SBC Express CD into your CD-ROM drive. SBC Express should start automatically. If not, select Run from the Windows Start menu. Type “D:\Launch.exe”. (Substitute the appropriate letter of your CD-ROM drive for “D”.) 4-2 Select Alcatel Speed Touch PC and click Next. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 8 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 10
4-3 SBC Express displays the Welcome screen. Click Next to proceed. 4-4 SBC Express displays the license agreement. If you agree to the terms, click Accept. If you do not accept, installation cannot continue. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 9 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 11
4-5 SBC Express now prompts you for your first and last name. Please type your first and last name and then click Next to proceed. Do not enter Technician Name. 4-6 Enter your 10-digit DSL phone number in the next screen. Click Next to proceed. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 10 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 12
4-7 SBC Express quickly checks your computer system to ensure that it meets the minimum requirements for DSL service. 4-8 SBC Express has determined that you need to install the Alcatel Speed Touch PC. Click Shutdown and proceed to step 5 to install the Alcatel Speed Touch PC. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 11 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 13
® Step 5: Installing the Alcatel Speed Touch PC If you shutdown your computer, leave the CD in the the CDROM drive, and SBC Express will continue after you restart. You should be at the following screen in the SBC Express Software: 5-1 Click Shutdown in SBC Express and then turn off all peripheral devices. Remember to leave the SBC Express CD in the CD-ROM drive. 5-2 Unplug the power cord for your computer from the electrical outlet. 5-3 Open the case of your computer (review y
Summary of the content on the page No. 14
5-6 Remove the metal PCI slot cover from the unused PCI slot, and retain the screw. PCI Slot Remove PCI slot cover 5-7 Carefully insert the Alcatel Speed Touch PC adpter into any empty PCI slot. Make sure the card is completely seated by pressing firmly. 5-8 Verify that the end bracket is flush against the chassis. Make sure the gold connectors along the base of the Alcatel Speed Touch PC adapter are completely and evenly inserted into the PCI slot. 5-9 Fasten the card into the
Summary of the content on the page No. 15
Installing the Alcatel Speed Touch PC® Software 5-11 Turn on your computer. • NOTE: Windows NT will NOT automatically detect your Alcatel Speed Touch PC® adapter. SBC Express will display the screen below. Please IGNORE this screen and proceed to step 5-12. Do NOT Cancel SBC Express. 5-12 Right click on the Network Neighborhood icon and select Properties. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 14 ©2001 SBC Advanced Solutions, In
Summary of the content on the page No. 16
5-13 Click on the Adapters tab. 5-14 Click on the Add button. 5-15 Click on the Have Disk button. 5-16 The SBC Express has copied all the necessary files to “C:\Temp”. At this prompt please type in C:\Temp and click OK. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 15 ©2001 SBC Advanced Solutions, Inc. All rights reserved
Summary of the content on the page No. 17
5-17 Windows NT will presents the following select OEM option screen, select ITeX ADSL PCI NIC and click OK. ( Note: The IteX ADSL PCI NIC is the Alcatel Speed Touch PC adapter. This is the formal adapter name used for NT ) 5-18 After you install the driver software, the ITeX ADSL PCI NIC will appear under Network Adapters. Click Close. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 16 ©2001 SBC Advanced Solutions, Inc. All rights res
Summary of the content on the page No. 18
5-19 You will be prompted to bind a TCIP/IP address to the Adapter. Select the ITeX ADSL PCI NIC in the drop down box in the Microsoft TCP/IP Properties window shown below. Next, click “Specify an IP address.” Fill in the IP address with the dummy IP of 10.0.0.1 and Subnet Mask of 255.0.0.0. These will be replaced by your Internet Service Provider instructions to be installed later. Click OK. 5-20 You will be prompted to reboot the system. This may take several ( 3-5 ) minutes a
Summary of the content on the page No. 19
5-21 SBC Express will re-run the Minimum Requirements test and detect the newly installed Alcatel Speed Touch PC adapter and complete, stopping at the following screen. If problems are detected follow the instructions on the screen or look at the troubleshooting section of this manual for further information. Follow the instructions in Step 6 beginning on the next page before continuing. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 18
Summary of the content on the page No. 20
Step 6: Finish Configuring Your System 6-1 If the Alcatel Speed Touch PC card is installed properly, you will see the following screen. You must now connect the Alcatel Speed Touch PC to the phone jack prepared in Step 3. 6-2 Connect the Alcatel Speed Touch ADSL modem, see diagram below. Installation Guide for Customer Self-Install: Alcatel Speed Touch PC®, Windows NT Page 19 ©2001 SBC Advanced Solutions, Inc. All rights reserved
