Summary of the content on the page No. 1
READ ME FIRST
Windows® 95/98/Me/2000
®
*DSL Equipment Installation Guide:
Efficient Networks® 5260
*Digital Subscriber Line
Part Number: 52609x02
Version 1.2-A
©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 2
Table of Contents Follow Steps 1 through 8 to complete the DSL Equipment Installation Step 1: Verify Your System Requirements and Documents 2 Step 2: Verify the Contents of Your DSL Equipment Kit 3 Step 3: Install a Telephone Filter on Every Telephone Line 4 Step 4: Choose Your Modem and Minimum Requirements Check 8 Step 5: Installing the Kingston® Hardware 13 DESKTOP Systems - Installing the Kingston® Ethernet Adapter 14 LAPTOP Systems - Installing the Ki
Summary of the content on the page No. 3
Step 1: Verify Your System Requirements and Documents This Installation Guide is for Windows® 95/98/Me/2000 users only. The SBC Express software will ensure that you meet the following minimum requirements. You will not be able to complete the installation without meeting these requirements. • PC with a Pentium-class processor, CD-ROM Drive, 133 MHz, 25 Mb free disk space, 32 Mb RAM and any one of the following: a) An available PCI slot (for desktop installations)* b) An availab
Summary of the content on the page No. 4
Step 2: Verify the Contents of Your DSL Equipment Kit Your DSL Equipment Kit Contains: A: This Installation Guide and the SBC Express CD. B: 1 Efficient Networks® 5260 DSL Modem with Ethernet cable (connects to Adapter, below) and power cable. C: 1 Filter Pack containing: 5 in-line filters, 1 wall-mount filter, 1 two-way adapter, and 1 data cable. D: 1 Kingston® Ethernet Adapter for Desktop PC --OR-- E: 1 Kingston® Ethernet Adapter for Laptop PC Note: Internet Software and/or
Summary of the content on the page No. 5
Step 3: Install a Telephone Filter on Every Telephone Line 3-1 Set up the phone jack where your DSL modem will go. 1) Locate the phone jack where you want to connect your DSL 2) Insert the 2-way adapter in the phone jack 3) Connect a filter to one side of the 2-way adapter Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 4 ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 6
4) If you have a phone, fax machine, analog modem or other phone device at this location, connect it to the filter 5) Connect the data cable that will go to your DSL modem to the unfiltered side of the 2-way adapter To the DSL modem to be installed in step 6. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 5 ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 7
3-2 Install a filter on all other phones and phone devices. Why do I need a filter on all my other phones and phone devices? Converting your regular phone line into a high-speed Digital Subscriber Line (DSL) can cause audible noise (high pitched tones and static) when you talk on the phone. You need to install a filter on every telephone or device that shares the same phone number as your DSL line to eliminate this noise. Answering machines Other phones Caller ID boxes filter filter
Summary of the content on the page No. 8
3-3 Other filters you may encounter in your DSL Equipment Kit. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 7 ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 9
Step 4: Choose Your Modem and Minimum Requirements Check 4-1 Insert the SBC Express CD into your CD-ROM drive. SBC Express should start automatically. If not, select Run from the Windows Start menu. Type “D:\Launch.exe”. (Substitute the appropriate letter of your CD-ROM drive for “D”.) 4-2 Select Efficient Networks 5260 and click Next. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 8 ©2001 SBC Advanced Solutions, Inc. All r
Summary of the content on the page No. 10
4-3 SBC Express displays the Welcome screen. Click Next to proceed. 4-4 SBC Express displays the license agreement. If you agree to the terms, click Accept. If you do not accept, installation cannot continue. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 9 ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 11
4-5 SBC Express now prompts you for your first and last name. Please type your first and last name and then click Next to proceed. Do not enter Technician Name. 4-6 Enter your 10-digit DSL phone number in the next screen. Click Next to proceed. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 10 ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 12
4-7 SBC Express quickly checks your computer system to ensure that it meets the minimum requirements for DSL service. If your computer meets the minimum requirements, SBC Express automatically proceeds to the next step. You should continue to Step 6 on page 17. If you shutdown your computer, leave the CD in the the CD-ROM drive, and SBC Express will continue after you restart. If your computer does not meet the minimum requirements, SBC Express displays a message with details of
Summary of the content on the page No. 13
If your computer fails the minimum requirements check because it does not have a Ethernet Adapter installed (see screen below), please go to Step 5 on page 13. If your network card is incorrectly installed, SBC Express will help you fix it. See Troubleshooting SBC Express on page 26 for help troubleshooting network card and minimum requirement problems. If you shutdown your computer, leave the CD in the the CD-ROM drive, and SBC Express will continue after you restart. Installati
Summary of the content on the page No. 14
Step 5: Installing the Kingston® Hardware IMPORTANT NOTE: If your computer already has an Ethernet card installed and you passed the minimum requirements step in the SBC Express Software, it is not necessary to install the Kingston® Ethernet Adapter provided in this equipment package. You may proceed directly to Step 6 on page 17. If not, you will need to install the Ethernet Adapter provided, and this requires that you open your PC. Please consult the documentation provided by your PC
Summary of the content on the page No. 15
Installing the Kingston® Ethernet Adapter You should be at the following screen in the SBC Express Software: • Follow steps 5-1 through 5-10 below for Desktop PC installations. • For Laptops, skip to step 5-11. DESKTOP Systems 5-1 Click Shutdown in SBC Express and then turn off all peripheral devices. Remember to leave the SBC Express CD in the CD-ROM drive. 5-2 Unplug the power cord for your computer from the electrical outlet. 5-3 Open the case of your computer (review your com
Summary of the content on the page No. 16
5-6 Remove the metal PCI slot cover from the unused PCI slot, and retain the screw. PCI Slot Remove PCI slot cover 5-7 Carefully insert the Kingston® Ethernet Adapter into any empty PCI slot. Make sure the card is completely seated by pressing firmly. 5-8 Verify that the end bracket is flush against the chassis. Make sure the gold connectors along the base of the Kingston® Ethernet Adapter are completely and evenly inserted into the PCI slot. 5-9 Fasten the card into the compu
Summary of the content on the page No. 17
LAPTOP Systems- Installing the Kingston® Ethernet Adapter 5-11 Click Shutdown in SBC Express and then turn off all peripheral devices. Remember to leave the SBC Express CD in the CD-ROM drive. 5-12 Insert the Kingston® PC Card into your computer’s PCMCIA Type II or Type III slot. 5-13 Carefully push the Media Access Module (MAM) into the socket on the PC Card until the locking tabs click into place. 5-14 Power up your laptop and make sure the SBC Express CD is still in the CD-RO
Summary of the content on the page No. 18
Step 6: Install the Efficient Networks® DSL Modem Your computer should be turned on. Your modem should be turned OFF. You should be at the following screen in the SBC Express Software. Only click Next AFTER modem is setup. 6-1 Consult the following diagram. Installation Guide for Customer Self-Install: Efficient Networks® 5260, Windows 95/98/Me/2000 Page 17 ©2001 SBC Advanced Solutions, Inc. All rights reserved.
Summary of the content on the page No. 19
6-2 Plug the power cable into the DSL modem and an electrical outlet. 6-3 Connect the data cable to your telephone jack and your DSL modem. There should NOT be a filter between the data cable and the wall jack. 6-4 Connect the Ethernet cable to the Kingston® Ethernet Port or the built –in Ethernet Port on the back of your PC and to the Ethernet Port on the back of your DSL modem. 6-5 Turn the DSL Modem power switch ON. 6-6 The Sys, ATM, Enet and DSL lights should all turn solid green w
Summary of the content on the page No. 20
Step 7: Finish Configuring Your System 7-1 SBC Express will install additional software necessary for your service. Leave the SBC Express CD in the CD-ROM drive. You will see the following screen during the software installation. Your machine may reboot during this process. 7-2 You have finished software installation for DSL. Click Finished in SBC Express window and then proceed to Step 8 to configure the connection to your Internet Service Provider. Installation Guide fo
