AMX Audio-Only Module MAX-AOM user manual

Summary of the content on the page No. 1

Installation Guide
MAX-AOM Audio-Only Module
3. Enter an available server output/zone number (between 1 - 33). This is the
MAX-AOM Audio-Only Module
Output Number that will appear in the WinMAX software.
The MAX-AOM Audio-Only Module (FIG. 1) is a streaming audio playback USB
Note: The server will not allow you to assign an audio output to an output/zone
module that distributes up to four stereo outputs (both digital and analog).
that is already in use. To determine which server outputs are a

Summary of the content on the page No. 2

As a result, the AOM connected to USB port 2 will switch from providing audio output/zones 5-8 to providing audio output/zones 1-4, the next time the server is rebooted. AOM #1 Remove the Faceplate 1 Mounting the MAX-AOM Note: Static electricity can damage electronic circuitry. Before mounting the AOM(s), (front) discharge any accumulated static electricity from your body and screwdriver by touching a grounded metal object. The MAX-AOM includes hardware for mounting the unit in a standard 19”