AMX IP Link Interface RMS user manual

Summary of the content on the page No. 1

Quick Start Guide
RMS IP Link Interface
Overview
The RMS IP Link Interface module enables the monitoring of Extron “IP
Link” controllers via RMS solutions. Once the module is loaded in a NetLinx
master, each connected IP Link device reports as a “room” within
MeetingManager and AssetManager. While you can use any NetLinx

master, the module was designed towards the NI-700.
Opens the Manage License window
A NetLinx master supports 12 Extron IP Link devices.
Before You Begin
1. Confirm your E

Summary of the content on the page No. 2

Step 4: Establish Extron Connection Settings One module license per Extron device and each device constitutes a room within RMS. 1. Click on Extron, RMS Device - 41001 to open the Extron Connection Settings window. Click on Manage NetLinx Systems to view your Extron device. Shown in 2. Within the Modify Extron Connection Settings (FIG. 5) section: FIG. 6. Though it appears as a NetLinx system, these fields are now populated by the Extron device. FIG. 6 Manage NetLinx Systems Password/