Polycom XS-3700 user manual

User manual for the device Polycom XS-3700

Device: Polycom XS-3700
Category: Network Router
Manufacturer: Polycom
Size: 0.55 MB
Added : 10/21/2014
Number of pages: 19
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Polycom XS-3700. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Polycom XS-3700.

For your convenience

If looking through the Polycom XS-3700 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Polycom XS-3700 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Polycom XS-3700 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Polycom XS-3700 User manual - Online PDF
Advertisement
« Page 1 of 19 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Polycom XS-3700 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Polycom XS-3700. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


VIEW Certified Configuration Guide
Xirrus Wi-Fi Array
XS-3500/3700/3900
June 2008 Edition
1725-36061-001
Version C

Summary of the content on the page No. 2

Configuration Guide Trademark Information Notice Polycom® and the logo designs Polycom, Inc. has prepared this document for SpectraLink® use by Polycom personnel and customers. The LinkPlus drawings and specifications contained herein Link are the property of Polycom and shall be neither NetLink reproduced in whole or in part without the prior SVP written approval of Polycom, nor be implied to Are trademarks and registered trademarks of grant any license to make, use, or sell equip

Summary of the content on the page No. 3

Xirrus Wi-Fi Array: XS-3500/3700/3900 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and Xirrus Wi-Fi Array infrastructure products. The products listed below have been thoroughly tested in Polycom’s lab using the VIEW Certification Test Plan. This document details how to configure the XS-3500, XS-3700 and XS-3900 Wi-Fi Arrays with Sp

Summary of the content on the page No. 4

Configuration Guide Known Limitations Voice quality may be impaired in an environment with heavy wireless TCP traffic, such as FTP data transfers. Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper. This document covers the security, coverage, capacity and QoS considerations necessary for ensuring excellent voice quality with enterprise Wi-Fi networks. For more detailed information on wireless LAN layout, network

Summary of the content on the page No. 5

Xirrus Wi-Fi Array: XS-3500/3700/3900 Network Topology The following topology was used for VIEW Certification testing. PN: 1725-36061-001_C.doc 5

Summary of the content on the page No. 6

Configuration Guide Configuration Settings Xirrus Arrays initially boot with all radios disabled except for the monitor radio. The monitor radio may be left enabled and in no way interferes with the SpectraLink Wireless Telephones; however it was disabled for the certification process for simplicity. Disabling the monitor radio If you wish to disable the monitor radio, use the following CLI commands: Xirrus_WLAN_Array# configure Xirrus_WLAN_Array(config)# interface iap Xirrus_WLAN

Summary of the content on the page No. 7

Xirrus Wi-Fi Array: XS-3500/3700/3900 The monitor radio may also be disabled with the Web Management Interface (WMI) as shown below. 1. In the navigation pane, click IAP Settings. 2. In the IAP Settings screen, clear the Enabled check box for IAP abg2. 3. Click the Apply button. Figure 1: Disabling the Monitor Radio PN: 1725-36061-001_C.doc 7

Summary of the content on the page No. 8

Configuration Guide Setting Radio Channels With the SpectraLink Wireless Telephones operating in 802.11b mode, at least one of the Wireless LAN Array’s Integrated Access Points (IAPs) must be set to the 2.4 GHz band. Any of the Array’s four abg radios may be used, and up to three may be used simultaneously. However, the radios must be set to the non-overlapping channels 1, 6, and 11. This may be done using the following CLI commands: Xirrus_WLAN_Array# configure Xirrus_WLAN_Array(con

Summary of the content on the page No. 9

Xirrus Wi-Fi Array: XS-3500/3700/3900 Configuring an SSID An SSID for the phones must be set on the Array. The following CLI commands show how to implement an SSID called ‘spec’. Xirrus_WLAN_Array(config)# ssid Xirrus_WLAN_Array(config-ssid)# add spec Xirrus_WLAN_Array(config-ssid-spec)# broadcast on Xirrus_WLAN_Array(config-ssid-spec)# show SSID "spec" Settings ================================================= State Enabled Active Yes Encryption

Summary of the content on the page No. 10

Configuration Guide This screen shows how to set up the SSID in the WMI. 1. In the navigation pane, click SSID Management. 2. Type the name in the New SSID Name: field near the top of the SSID Management screen. 3. Click the Create button in the upper right corner of the screen. 4. The name appears in the SSID list toward the center of the page. 5. Click the name and select the appropriate features below. 6. Be sure to click the Enable option on the Broadcast SSID line. Figure

Summary of the content on the page No. 11

Xirrus Wi-Fi Array: XS-3500/3700/3900 Setting Radio Cell Size The radio transmit powers and receive sensitivities should be set appropriately for the environment in which they are operating. The simplest way to do this is to pick an operating cell size for them. The following CLI commands illustrate how to set a small cell size on three of the abg radios. Please see the Xirrus Wi-Fi Array Users Guide for a detailed explanation of radio transmit power, receive sensitivities and cell

Summary of the content on the page No. 12

Configuration Guide This screen shows how to set the cell size and enable the radios via the IAP Settings page of the WMI. 1. In the navigation pane, click IAP Settings. 2. In the IAP Settings page, click the Enabled check box for each radio you wish to enable. 3. In the Cell Size column, select the desired cell size for each radio. 4. Click Apply to initiate the changes to the Array. Figure 3: Configuring IAPs The SpectraLink Wireless Telephones should now be fully operational a

Summary of the content on the page No. 13

Xirrus Wi-Fi Array: XS-3500/3700/3900 Security Enabling WPA-PSK For WPA-PSK mode, the global encryption cipher method must be set to TKIP with the following CLI commands: Xirrus_WLAN_Array(config)# security Xirrus_WLAN_Array(config-security)# wpa tkip on Xirrus_WLAN_Array(config-security)# wpa aes off Xirrus_WLAN_Array(config-security)# show Global Security Settings Summary -------------------------------- WEP: key 1 size : not set (default) key 2 size : not set key

Summary of the content on the page No. 14

Configuration Guide This screen shows how the global encryption cipher can be set through the WMI. 1. In the navigation pane, click Global Settings. 2. In the Global Settings screen, click the Yes option on the TKIP Enabled line. 3. Click the Apply button to save the settings. Figure 4: Global WPA Settings 14 PN: 1725-36061-001_C.doc

Summary of the content on the page No. 15

Xirrus Wi-Fi Array: XS-3500/3700/3900 Setting the Pre-Shared Key The pre-shared key must be provided next. In the example below the passphrase is set to ‘11111111’. The passphrase is an attribute of the SSID and is set with the following CLI commands: Xirrus_WLAN_Array(config)# ssid Xirrus_WLAN_Array(config-ssid)# edit spec Xirrus_WLAN_Array(config-ssid-spec)# encryption wpa ssid_specific Xirrus_WLAN_Array(config-ssid-spec)# passphrase 11111111 Xirrus_WLAN_Array(config-ssid-spec)# sh

Summary of the content on the page No. 16

Configuration Guide This screen shows how to set the encryption and passphrase in the SSID Management page of the WMI. 1. In the navigation pane, click SSID Management. 2. Select the correct SSID from the list at the center top of the page. 3. On the Security Type line, select WPA from the drop-down list. 4. On the Security Settings line, click the SSID Specific Settings option. 5. On the PSK Authentication line, click the Yes option. 6. Enter and verify the WPA Preshared Key. 7. Cli

Summary of the content on the page No. 17

Xirrus Wi-Fi Array: XS-3500/3700/3900 Enabling WPA2-PSK If WPA2-PSK mode is desired then the global encryption cipher method should be set to AES with the following CLI commands: Xirrus_WLAN_Array(config)# security Xirrus_WLAN_Array(config-security)# wpa aes on Xirrus_WLAN_Array(config-security)# wpa tkip off Xirrus_WLAN_Array(config-security)# show Global Security Settings Summary -------------------------------- WEP: key 1 size : not set (default) key 2 size : not set

Summary of the content on the page No. 18

Configuration Guide Now provide the pre-shared key (‘11111111’ in this example): Xirrus_WLAN_Array(config)# security Xirrus_WLAN_Array(config)# ssid Xirrus_WLAN_Array(config-ssid)# edit spec Xirrus_WLAN_Array(config-ssid-spec)# encryption wpa2 ssid_specific Xirrus_WLAN_Array(config-ssid-spec)# passphrase 11111111 Xirrus_WLAN_Array(config-ssid-spec)# show SSID "spec" Settings ================================================= State Enabled Active Yes Enc

Summary of the content on the page No. 19

Xirrus Wi-Fi Array: XS-3500/3700/3900 The global encryption cipher for WPA2-PSK can also be set through the WMI as illustrated in Figure 4 Global WPA Settings. The difference between the WPA-PSK and WPA2-PSK settings is that, for WPA2- PSK, No should be selected on the TKIP Enabled line, and Yes should be selected on the AES Enabled line. Similarly, the SSID specific settings for WPA2-PSK may be applied as shown in Figure 5 SSID Specific WPA Settings. For Security Type select WPA2 inst


Alternative user manuals
# User manual Category Download
1 Polycom 7000 User manual Network Router 8
2 Polycom DOC2231A User manual Network Router 0
3 Polycom INTERMEC 2101 User manual Network Router 2
4 Polycom DOC2237A User manual Network Router 9
5 Polycom 7962 User manual Network Router 0
6 Polycom INTERMEC 2102 User manual Network Router 0
7 Polycom INTERMEC 2100 User manual Network Router 5
8 Polycom INTERMEC WA21 User manual Network Router 3
9 Polycom DOC2238A User manual Network Router 1
10 Polycom ReadiConvene 3726-17298-001 User manual Network Router 0
11 Polycom DOC2230A User manual Network Router 0
12 Polycom INTERMEC WA22 User manual Network Router 1
13 Polycom VSX7000E User manual Network Router 11
14 Polycom KIRK Wireless Server 6000 User manual Network Router 1
15 Polycom XS-3500 User manual Network Router 0
16 Sony BKS-R3202/R3210/R3220 User manual Network Router 77
17 Sony DVS-V3232B/V3232M User manual Network Router 3
18 Sony BVS-V3232 User manual Network Router 8
19 Sony DMX-WL1 User manual Network Router 6
20 Sony BVS-A3232 User manual Network Router 6