Streszczenie treści zawartej na stronie nr. 1
43-1106.fm Page 1 Wednesday, April 26, 2000 10:30 AM
ET-1106 900 MHz Digital
Cordless Telephone
with Caller ID and Call Waiting
Owner’s Manual
Please read before using this equipment.
Streszczenie treści zawartej na stronie nr. 2
43-1106.fm Page 2 Wednesday, April 26, 2000 10:30 AM Contents Features ................................................................................. 4 Installation ............................................................................. 8 Selecting a Location ........................................................ 8 Connecting the Phone ..................................................... 9 Preparation .......................................................................... 10
Streszczenie treści zawartej na stronie nr. 3
43-1106.fm Page 3 Wednesday, April 26, 2000 10:30 AM Dialing Numbers from a Caller ID Record ..................... 31 Deleting Caller ID Records ............................................ 32 Clear All Memory ........................................................... 33 Troubleshooting .................................................................. 34 Care ...................................................................................... 36 Replacing the Battery Pack ................
Streszczenie treści zawartej na stronie nr. 4
43-1106.fm Page 4 Wednesday, April 26, 2000 10:30 AM Features Your RadioShack 900 MHz Digital Cordless Telephone with Caller ID and Call Waiting offers the latest advances in cordless phone technology. It combines a cordless phone and a Caller ID unit in one system. It saves up to 50 Caller ID records that you can review and call back. Its headset jack means you can connect an optional headset for hands-free convenience while you use the phone. The base’s space-saving, upright design makes
Streszczenie treści zawartej na stronie nr. 5
43-1106.fm Page 5 Wednesday, April 26, 2000 10:30 AM Display — lets you see phone numbers as you dial them or re- call them from the cordless phone memory and Caller ID records. 20-Number Memory Dialing — lets you store up to 20 num- bers in memory for easy dialing. Auto Scan — automatically selects a clear channel when you pick up the phone. IN USE Indicator — lets you see when the handset is on, so you can avoid inadvertently leaving the phone off-hook. Headset Jack — lets you connect
Streszczenie treści zawartej na stronie nr. 6
43-1106.fm Page 6 Wednesday, April 26, 2000 10:30 AM IMPORTANT CALLER ID INFORMATION To use the System’s Caller ID features, you must be in an area where Caller ID service is available and you must subscribe to that service. Where Caller ID is offered, one or more of the following options are generally available: • caller’s number only • caller’s name only • caller’s name and number For the cordless phone’s Caller ID memory dial feature to oper- ate, you must receive the caller’s number. Impo
Streszczenie treści zawartej na stronie nr. 7
43-1106.fm Page 7 Wednesday, April 26, 2000 10:30 AM READ THIS BEFORE INSTALLATION We have designed your telephone to conform to federal regula- tions, and you can connect it to most telephone lines. However, each device that you connect to the phone line draws power from the phone line. We refer to this power draw as the device’s ringer equivalence number, or REN. The REN is on the bottom of your phone’s base. If you are using more than one phone or other device on the line, add up all the R
Streszczenie treści zawartej na stronie nr. 8
43-1106.fm Page 8 Wednesday, April 26, 2000 10:30 AM Installation SELECTING A LOCATION Select a location for the telephone that is: • near an AC outlet • near a telephone line jack • out of the way of normal activities • away from electrical machinery, electrical appliances, and metal walls or filing cabinets • away from wireless intercoms, alarms, and room monitors The base’s location affects the phone’s range. If you have a choice of several locations, try each to see which provides the b
Streszczenie treści zawartej na stronie nr. 9
43-1106.fm Page 9 Wednesday, April 26, 2000 10:30 AM CONNECTING THE PHONE Follow these steps to set up and connect the base. 1. Plug one end of the supplied modular cord into the TEL. LINE jack on the bottom of the base. 2. Plug the supplied AC adapter’s L-shape barrel plug into the 9V DC jack on the bottom of the base. 3. Press the modular cord into the left groove and the adapter’s cord into the right groove on the bottom of the base. 4. Plug the modular cord’s other end into a modular phon
Streszczenie treści zawartej na stronie nr. 10
43-1106.fm Page 10 Wednesday, April 26, 2000 10:30 AM Cautions: You must use a Class 2 power source that sup- plies 9V DC and delivers at least 300mA. Its cen- ! ter tip must be set to positive and its plug must fit 9V DC the phone's jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter. • Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the
Streszczenie treści zawartej na stronie nr. 11
PAGE ® ® CALLER ID CALL WAITING 43-1106.fm Page 11 Wednesday, April 26, 2000 10:30 AM Note: If the belt clip is attached to the handset, remove it before sliding open the battery compartment cover. To charge the battery pack, place the handset on the base. The CHARGING/IN USE indica- tor on the base lights red. Let the battery pack charge for about 16 hours. You can recharge the battery pack at any time, but be sure to recharge it when LOW BATTERY is shown on the handset display. Notes: •
Streszczenie treści zawartej na stronie nr. 12
® 43-1106.fm Page 12 Wednesday, April 26, 2000 10:30 AM • The CHARGING/IN USE indicator still lights even when a battery pack is not installed in the battery compartment. Make sure the battery is installed before using the phone. • To avoid damage to the battery pack, always recharge the handset before battery power grows too weak for LOW BATTERY to appear on the display. • If you are not going to use your phone for an extended period of time, disconnect its battery. This helps to increase th
Streszczenie treści zawartej na stronie nr. 13
PAGE ® ® CALLER ID CALL AITING W 43-1106.fm Page 13 Wednesday, April 26, 2000 10:30 AM When a spare battery pack is installed in the base, the SPARE BATTERY indicator lights red and the battery pack is automati- cally charged. The spare battery pack re- quires about 48 hours to fully charge. When the spare battery is used during a power failure, the POWER indicator flash- es. CHECK AC POWER appears on the handset display. USING A HEADSET You can make or answer calls with Headset hands-free
Streszczenie treści zawartej na stronie nr. 14
43-1106.fm Page 14 Wednesday, April 26, 2000 10:30 AM Setting Up the Phone SETUP MENU The setup menu has four categories: Changing the Ringer Type, Setting the Ringer Volume, Setting the Dialing Mode, and Setting the Keyclick. All settings are kept in permanent memory. To change the settings on your phone, press OK to enter the main menu then 9 9 9 9or 8 8 8 8 to scroll through the categories. Press OK to select a category. If you make a mistake, press OFF to exit or cancel and start again.
Streszczenie treści zawartej na stronie nr. 15
43-1106.fm Page 15 Wednesday, April 26, 2000 10:30 AM 5. Press 9 9 9 9 or 8 8 8 8 to scroll from RING TYPE 1 through OFF. The phone sounds the ring type when it appears on the dis- play. OK 6. Press and a tone sounds to indicate you successfully set the selected ringer tone. OFF 7. Press to exit. Note: OFF Press twice to exit all menus. Setting the Ringer Volume OFF 1. Press on the handset. OK 2. Press on the handset to display the categories. 3. Press 9 9 9 9 or 8 8 8 8 on the handse
Streszczenie treści zawartej na stronie nr. 16
43-1106.fm Page 16 Wednesday, April 26, 2000 10:30 AM Setting the Dialing Mode OFF 1. Press on the handset. OK 2. Press on the handset to display the categories. 3. Press 9 9 9 9 or 8 8 8 8 on the handset until SETUP MODE OK appears, then press . 4. Press 9 9 9 9 or 8 8 8 8 on the handset until SET DIAL TYPE OK appears, then press . 5. Press 9 9 9 9 or 8 8 8 8 to select DIAL TYPE TONE or DIAL TYPE PULSE. OK 6. Press and a tone sounds. OFF 7. Press to exit. If you are unsure which type of
Streszczenie treści zawartej na stronie nr. 17
43-1106.fm Page 17 Wednesday, April 26, 2000 10:30 AM 3. Press 9 9 9 9 or 8 8 8 8 on the handset until SETUP MODE OK appears, then press . 4. Press 9 9 9 9 or 8 8 8 8 on the handset until SET KEYCLICK OK appears, then press . 5. Press 9 9 9 9 or 8 8 8 8 and KEYCLICK ON or KEYCLICK OFF (silences the tones you hear when you press the keys on the handset) appears. OK 6. Press to enter your selection, a tone sounds. OFF 7. Press to exit. Operation MAKING AND RECEIVING CALLS To make a call, li
Streszczenie treści zawartej na stronie nr. 18
43-1106.fm Page 18 Wednesday, April 26, 2000 10:30 AM OFF To end a call, place the handset on the base or press on the handset. To answer a call, press any key on the handset. Notes: TALK/FLASH # • After you press , cannot be used to insert a pause. It is effective in pre-dial and memory dialing only. See “Entering a Pause in a Memory Number” on Page 23. • You can make or answer a call on another phone on the same line as the phone. EXTENSION IN USE displays on the handset when another line
Streszczenie treści zawartej na stronie nr. 19
43-1106.fm Page 19 Wednesday, April 26, 2000 10:30 AM OFF OK 1. To redial a number, press then press . REDIAL MEMORY appears. OK 2. Press then press 9 9 9 9 or 8 8 8 8 to select the desired stored number from R1 to R5. TALK/FLASH 3. Press . The phone dials the stored number and the handset shows the number dialed. Notes: • The redial memory only stores the first 20 digits of any number dialed. TALK/FLASH • The dialed numbers are saved only if is pressed. • We recommend you do not use REDIA
Streszczenie treści zawartej na stronie nr. 20
43-1106.fm Page 20 Wednesday, April 26, 2000 10:30 AM USING FLASH TALK/FLASH Press to perform the switchhook operation for spe- cial services, such as Call Waiting. TALK/FLASH For example, if you have Call Waiting, press to take an incoming call without disconnecting the current call. TALK/FLASH Press again to return to the first call. Note: TALK/ If you do not have special phone services, pressing FLASH might disconnect the current call. USING MUTE Follow these steps to mute the outgoi
