Instrukcja obsługi Marshall electronic V-R63P-SDI

Streszczenie treści zawartej na stronie nr. 1

Marshall
V-R63P-SDI Instruction Sheet
Broadcast Multimedia Division
http://www.LCDRacks.com e-mail: sales@mars-cam.com
The V-R63P-SDI is a rack mountable unit that has three independently controlled 5.8" active matrix LCD panels with
loop through capability. These 16:9 high-resolution panels have a pixel count of 1200 × 234, and are rated at a very
bright 350 candle luminance. Each panel has an SDI and a composite video input with an NTSC/PAL switch on the
back for each channel. Each of the th

Streszczenie treści zawartej na stronie nr. 2

M Ma arrssh ha allll 5. Tally - The tally system on the V-R63P-SDI is accessed via the DB-15 connector on the back of the unit. The system works by closing the contacts between the ground pin and the corresponding LED pin. The system is self powered, DO NOT GIVE POWER TO THE PINS. The pinout is as follows: Green Red Yellow Monitor 1 Pin 1 Pin 2 Pin 3 Monitor 2 Pin 6 Pin 7 Pin 8 Monitor 3 Pin 11 Pin 12 Pin 13 PINS 4, 5, 9, 10, 14 and 15 ARE COMMON GROUNDS Warranty Marshall Electronics warran