Instrukcja obsługi X10 Wireless Technology MS13A

Streszczenie treści zawartej na stronie nr. 1

Set-Up and Operating Instructions for MS13A Indoor Motion Detector
The MS13A Motion Detector sends Wireless Radio Frequency (RF) signals to an X10 Transceiver (RR501 or
TM751) or any X10 security system base receiver. The receiver then passes the signals onto your house wiring to
turn on lights (or appliances) around your home. You plug your lights and appliances into X10 Modules (sold
separately). The MS13A also works with the CM11A Two-Way Computer Interface to initiate macros (routines)
so yo

Streszczenie treści zawartej na stronie nr. 2

To set whether you want the MS13A to transmit EVERY time it sees motion or only at night: Press the Unit/Off button once. The red LED flashes. Then press and hold the House/On button. The green LED turns on. 3 seconds later the MS13A reports its dusk/dawn setting as follows: The red LED blinks once if the MS13A is set to detect motion at all times. The red LED blinks twice if the MS13A is set to detect motion only when it’s dark. To change this, Press the Unit/Off button once. The red LED fl