Instrukcja obsługi Chamberlain CARTON INVENTORY RWIS

Streszczenie treści zawartej na stronie nr. 1

®
Model RWIA & RWIS
Wireless Portable Intercom
Overview Channel Button: Press the Channel button to set
intercom to one of four secure channels or the paging
The Intercom has up to a 1000' range and allows
channel. The default channel for the
multiple simultaneous conversations, using a
intercom is the paging channel where
900 Mhz secure digital radio link. The intercoms form
all four channel lights are lit. An
an exclusive network and respond only to other
intercom on a channel can onl

Streszczenie treści zawartej na stronie nr. 2

Assemble Intercom INTERCOM LEARN MODE Press the Learn button until a Step 1 beep is heard. OR Press and hold both buttons for 5 seconds. Each intercom will emit a tone when programmed into network. Repeat for any additional intercoms. Add to an Existing Network Install 4 AA Alkaline batteries (not provided). (Lithium batteries recommended for colder environments.) Step 2 Press the Learn button on the new intercom until a beep is heard. Within 10 seconds put any networked intercom into

Streszczenie treści zawartej na stronie nr. 3

Troubleshooting Intercom does not function. Need to clear intercom’s memory. Check batteries in intercom. If using an AC Adapter Press and hold Learn button, an initial beep will be ensure that it is plugged in. heard. Continue to hold until a second beep is heard Ensure intercom is connected to a network. (about 15 seconds). Ensure other intercoms are not See Programming Intercom. activated during this time. Intercoms in the network that Ensure that intercoms are on the same channel. See a

Streszczenie treści zawartej na stronie nr. 4

FOR TECHNICAL SUPPORT DIAL OUR TOLL FREE NUMBER: 1-800-528-9131 www.chamberlain-DIY.com NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS. Tested to Comply with FCC Standards for Home or office use. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer