Instrukcja obsługi Rolls RM82

Streszczenie treści zawartej na stronie nr. 1

OPERATION
CONFIGURING THE 1/4” INPUT JACKS AS DIRECT OUTPUTS
The eight 1/4” Input jacks come from the factory confi gured as line inputs and
are electrically mixed with the XLR jacks. They may be used together if desired.
RM82
To confi gure a channel’s 1/4” jack as a Direct Out, fi rst remove the RM82 lid.
For each channel there are dual three-pin headers with shorting jumper on two
pins. The setting from the factory is on “IN”. By moving the shorting jumpers to
MIC LINE MIXER
the confi guratio

Streszczenie treści zawartej na stronie nr. 2

INTRODUCTION CONNECTION Thank your for your purchase of the Rolls RM82 Mic Line eight channel audio mixer. It is 1. MICROPHONE AND MAIN OUTPUT CONNECTION Connect microphones to the XLR Inputs as shown here. If the intended for sound reinforcement or studio applications where several microphones or line sources need to be combined to a single output. Please review this manual for proper microphones are condenser type, and require phantom power - remember to switch on (down) the corresponding P